







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Anaheim, CA: What the Job Actually Costs and How Long It Runs
Paver driveway installation in Anaheim typically runs $7,000 to $18,000 and takes three to six working days from demo to final compaction, depending on square footage, base depth, and how much of the existing slab has to come out. A standard two-car approach with a border pattern usually lands near the middle of that range. We build these on a compacted aggregate base with edge restraint and polymeric joint sand, so the surface stays put through Anaheim’s hot, dry summers. Call (888) 255-9354 for a free on-site estimate.
How we build a paver driveway, stage by stage

The order of operations on a paver driveway matters more than any single material choice. Get the base wrong and the nicest stone in the catalog will rut and shift within two seasons. Here’s what actually happens once we’re on your property.
Stage 1: Layout, marking, and utility locate (half a day)
We mark out the driveway footprint against the garage opening and apron, confirm the slope that drains water away from the house and toward the street, and get the underground utility locates done before anyone touches a shovel. You decide on the run-off direction at this point: a slight crown down the center or a single cross-slope to one side. Both work. The crown handles heavy rain better, the single slope hides water lines more easily.
Stage 2: Demolition and haul-away (one to two days)
An existing concrete or asphalt driveway comes out with a breaker and skid-steer, and the debris goes to a licensed recycler. This is where surprises live: an old, thick pour with rebar slows the day down, and any unmarked irrigation, low-voltage landscape lighting, or a root system running under the drive has to be rerouted before prep continues. You’ll want to move vehicles and clear the garage apron the morning we start.
Stage 3: Excavation and base prep (one to two days)
We excavate to a depth that accommodates the paver thickness plus a compacted base, typically several inches of crushed aggregate compacted in lifts. The base is the load-bearing layer, and it’s laid in incremental passes with a plate compactor between each one. You decide here whether to add a geotextile separation fabric; on Anaheim’s older lots with mixed fill and prior utility trenching, it’s cheap insurance against base migration.
Stage 4: Edging, sand, and setting the pavers (one to two days)
Edge restraint goes in first, pinned along both sides to lock the field in place. Then a bedding layer of sand, then the pavers laid in the pattern you picked, cut tight at the garage, the street apron, and any curves. You’ll want to have your pattern and color locked well before this stage; changing your mind mid-lay costs time and material.
Stage 5: Compaction, polymeric sand, and final walkthrough (half a day)
We run a plate compactor over the finished surface to seat the pavers into the bedding, sweep polymeric sand into the joints, mist it to activate, and clean the face. Then a walkthrough with you over drainage, edge lines, and the written 730-Day Done Right Promise. If anything on that punch list isn’t right, we fix it.
Homeowners often pair a new driveway with ADU Design & Permitting in Anaheim when they’re adding a detached unit on the same lot, since the driveway access and the ADU footprint have to be planned together.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the decisions on a paver driveway come down to material, finish, pattern, and border. Here’s the honest trade-off on each.
- Concrete pavers, standard finish: the workhorse choice and the one most Anaheim jobs land on. Durable, repairable unit-by-unit, and available in a wide range of colors. Sits at the lower-middle of the price range and holds up to the Anaheim sun without fading.
- Concrete pavers, premium / tumbled finish: the same material with a weathered, textured face and richer color blends. A noticeable step up in price; suits the Craftsman and older bungalows near downtown, where a clean modern face can look out of place.
- Clay brick pavers: the warmest look, excellent color retention, and a classic match for pre-war Anaheim homes. Higher material cost and a smaller installer pool, so budget for the top of the range. Requires a proper base and edge restraint to keep it locked.
- Permeable pavers: an open-joint system with a graded base that lets water drain through. Worth considering on larger driveways or lots with poor runoff, though the base excavation and grading are deeper, which adds cost.
- Pattern and border: a running bond or herringbone field with a soldier-course border is the standard look. Herringbone interlocks better under heavy loads; a basket-weave or ashlar pattern runs more per square foot in labor. A contrasting border in a darker color frames the drive and helps hide slight edge settling.
- Paver thickness and base depth: thicker units and a deeper base cost more up front but are the right call on a longer drive or where a heavier vehicle parks regularly.
We lean on partners like Belgard for the paver field, and the same crew that lays the driveway can handle James Hardie siding and exterior detailing on the house if you’re sprucing up the frontage at the same time.
What Paver Driveways cost in Anaheim, CA

Budget $7,000 to $18,000 for a paver driveway installation in Anaheim. The most common job, a standard two-car drive in the 400 to 600 square foot range with concrete pavers and a border, typically lands in the $9,000 to $13,000 band. A few variables push a job toward the low or high end.
| Line item | Typical range |
|---|---|
| Paver driveway installation (full job) | $7,000 – $18,000 |
| Driveway replacement (removal of existing slab plus new surface) | $5,000 – $14,000 |
| Driveway sealing (after installation cures) | $250 – $700 |
What moves the number:
- Square footage and shape: a long, winding Anaheim Hills driveway or a wide circular approach costs more than a straight two-car run. Curves and complex borders add cut labor.
- Existing surface and base condition: a sound existing base can be reused in some cases; a failed slab with poor subgrade means full removal, disposal, and deeper excavation, which pushes toward the high end.
- Material grade: standard concrete pavers sit at the low-middle; clay brick or premium tumbled finishes move you toward the top.
- Drainage and grading: adding a permeable system, a channel drain, or correcting a slope that currently sends water at the garage adds cost but prevents a bigger problem later.
- Access and haul-off: tight lots and long carry distances for the skid-steer slow the demo and add labor.
A written, line-item estimate covers demolition, haul-away, base prep and compaction, edge restraint, pavers, polymeric sand, and final cleanup. Things that can sit outside the base quote: relocating utilities or irrigation, a new street apron or concrete apron, and any retaining-wall work on a sloped lot. Upfront pricing means the number you see is the number you pay, with no surprise change order once the demo starts.
See the difference
Before
After
Before
After
Before
AfterWhat Anaheim homes specifically do to this job
Anaheim isn’t one market. On the older grid around the Colony District (92805), we’re pulling out original concrete poured decades ago, often over a subgrade that’s been patched and trench-dug through repeated plumbing and electrical updates, so the excavation and base work are the real story. Those pre-war and early-1900s bungalows are also where a clay brick paver driveway earns its keep: the material suits the architecture and the era. Out in Anaheim Hills (92807 and 92808), the variable flips entirely. Slope, retaining walls, and slope drainage drive the design, and the hot, dry Santa Ana winds out of the canyons mean exterior work like paver setting and concrete gets scheduled to dodge peak summer heat, both for the material’s sake and the crew’s. Central and east Anaheim’s 1960s-70s tract subdivisions (92806 and 92807) usually have straightforward flat approaches and sound grading, which keeps those jobs closer to the middle of the range. Across all of it, Anaheim permitting runs through the city’s own building division, and the driveway approach and any right-of-way work get sorted with the city, not the county. This is part of the broader Driveway & Pavers in Anaheim work we handle across the city and throughout Anaheim.
The failure modes we see most: pavers laid over an under-compacted base that rut within a year, missing edge restraint that lets the field spread, and drainage that dumps water against the garage door because the original slope was never corrected. A proper base and edge fix all three.
Serving Anaheim, CA – Our Local Coverage Area
We serve Anaheim and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Paver Driveways in Anaheim

A standard two-car paver driveway takes three to six working days from demo to final compaction, weather permitting. Larger drives, complex patterns, or a failed base that needs deeper excavation can push toward seven or eight days. Call (888) 255-9354 for a free estimate and a realistic timeline for your specific property.
In most cases a driveway that stays on private property, replacing an existing drive in the same footprint, doesn’t require a building permit. If you’re changing the approach or the sidewalk cut in the public right-of-way, the city’s building division gets involved and a permit is typically required. We sort out what applies to your lot and pull the permits that are needed.
Sometimes, but only if the existing base is sound and can be properly graded. Overlaying pavers on a broken or uneven slab leads to settling and rutting within a season, so we evaluate the base on-site and are honest about whether a full removal is the right call. On Anaheim jobs we usually find full removal is the safer bet on anything older than about 20 years.
Paver driveway installation in Anaheim runs $7,000 to $18,000, with most standard jobs landing in the $9,000 to $13,000 band. We offer 0% financing for 18 months, plus $1,000 off projects over $10,000, so the cost of a quality job doesn’t have to hit your savings account all at once. Call (888) 255-9354 for a written, line-item estimate.
Every paver driveway we install is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers our workmanship on the base, the laying, and the edge restraint for two full years. Calls are answered by a live person, 24/7, so if something needs attention, you reach someone.
Get a free on-site estimate for your Anaheim paver driveway
A free on-site estimate for paver driveways in Anaheim starts with a visit where we measure the footprint, look at the existing base, check the drainage, and talk through material and pattern options. You leave with a written, line-item quote and a clear timeline. Call Groundwork Construction Co. at (888) 255-9354, or explore our full Driveway & Pavers service. If you’re also converting a garage into living space, homeowners often pair this with Garage Conversion ADU in Anaheim so the new driveway access and the unit are planned together.
Written by the team at Groundwork Construction Co.












