







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What specialty roofing in Anaheim, CA actually involves
Specialty roofing in Anaheim means roof systems that fall outside standard asphalt shingle work: clay and concrete tile, standing-seam metal, low-slope and flat assemblies, and the wildfire-hardened assemblies that Anaheim Hills homeowners increasingly ask for. A typical tile or metal specialty job runs 3 – 7 working days, and pricing in Anaheim lands between $15,000 and $40,000 for metal, with tile work priced per square once we’ve seen the deck. Call (888) 255-9354 for a free on-site estimate before you commit to anything.
How a specialty roof goes on, stage by stage

Specialty roof work punishes shortcuts more than shingle work does. Tile and metal weigh more, fasten differently, and don’t forgive a deck that was never checked. Here’s the real sequence we run in Anaheim.
Day 1 – tear-off and deck inspection. We strip the old roofing to the sheathing and walk every sheet. On pre-war homes near the Colony District, that walk regularly turns up spaced or patched boards that need sistering before anything heavy goes back down. You decide here whether to replace the whole deck or repair sections; the difference runs into the thousands.
Day 2 – underlayment and flashing. Specialty roofs live or die on what’s underneath. Tile gets a high-temp underlayment and metal gets a slip sheet; both get new valley metal and step flashing at every wall. This is the day you’ll see the most visible progress and the least dramatic photos. We photograph it for your file anyway.
Days 3 to 5 – the field installation. Tile goes down in courses with the correct fastener pattern and battens for the pitch. Standing seam panels get set to the layout you approved, with concealed clips that let the metal move with heat. Anaheim’s summer heat means we schedule this stage early in the morning where we can.
Day 6 – penetrations and terminations. Vents, skylights, pipe boots and ridge get finished. This is where cheap jobs fail two years later, and it’s the stage you should inspect with us if you’re hands-on.
Day 7 – inspection and walkthrough. Anaheim’s building division inspects the work, we correct anything flagged on the spot, and we walk the roof and the yard with you. Your signed paperwork includes the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
- Clay tile vs. concrete tile. Clay holds color longer and suits the Spanish-revival look on older Anaheim homes; concrete costs less per square and comes in more profiles. Concrete is heavier, so the deck has to be up to it.
- Standing seam vs. exposed-fastener metal. Standing seam hides the fasteners and lasts longer, at roughly the top of the metal range. Exposed-fastener panels cost less and need washer replacement every decade or so.
- Wildfire-hardened assemblies. In Anaheim Hills, Class A fire-rated systems with ember-resistant vents and noncombustible edge metal are worth the upcharge. Ask for the rating in writing.
- Low-slope and flat systems. Single-ply membrane or modified bitumen for shallow pitches and patio covers. We’ll tell you flat if a pitch is too low for tile.
- Synthetic vs. battens under tile. Battens give you a drainage plane and a flatter finished field; synthetics cost less and work fine on steeper pitches.
We specify GAF and CertainTeed components on the assemblies that use them, and we’ll pair James Hardie fascia and trim where the roof edge needs rebuilding at the same time.
What Specialty Roofing costs in Anaheim, CA

Metal roof installation in Anaheim runs $15,000 – $40,000. Tile work is priced per square once we’ve measured the roof, and most tile repairs land between $600 and $2,500. A full specialty replacement generally falls inside the $8,000 – $20,000 roof replacement band unless the deck or the pitch pushes it up.
Five things move that number: roof size and pitch, deck condition, whether the assembly is tile, metal or membrane, how much flashing and penetration work the roof carries, and whether the permit scope includes structural reinforcement. Pulling and passing the permit is part of every quote; we don’t hand that to you.
Your written estimate is line-item: tear-off, deck repair allowance, underlayment, material, labor, permit and cleanup. What it won’t include is anything we can’t see until the deck is open, which is why we spell out the deck allowance rather than hide it. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Anaheim homes specifically do to this job
Anaheim splits the roofing conversation in two. Near the Colony District and the older 92805 grid, you’re working on pre-war bungalows and Craftsmans where the roof deck, the fascia and often the wall flashing have all aged together; the permit runs through Anaheim’s own building division, not the county, so the inspection timeline is set locally. East of there, in the 92806 and 92807 tract subdivisions, you get 1960s and 70s roofs with thinner sheathing and original vents that need replacing alongside the roof. Anaheim Hills (92807) carries its own problem: Santa Ana winds out of the canyons drive ember exposure, slope drainage and brush clearance into the same conversation as the roof. We schedule tile and metal work to dodge peak heat for a reason. If the job is part of a full Roofing in Anaheim scope, we coordinate the trades on one schedule. Homeowners often pair this with Energy-Efficient Windows in Anaheim while the roof is open, and with Sliding & Patio Doors in Anaheim when the rear elevation is getting rebuilt. Our Roofing service covers the full range, and you can see the wider Anaheim service area for how we schedule out here.
Serving Anaheim, CA – Our Local Coverage Area
We serve Anaheim and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Specialty Roofing in Anaheim

Most tile and metal jobs take 3 – 7 working days from tear-off to inspection. Larger roofs and heavy deck repair push toward the long end; simple exposed-fastener metal can finish in three.
Yes. Anaheim’s building division requires a permit for reroofing and for structural changes to the roof system, and we pull it and pass the inspection as part of the job. You don’t file anything yourself.
Sometimes, but not on tile or metal in most cases. Heavy assemblies need the deck exposed to verify it can carry the load, and overlay work hides the damage that causes leaks. We’ll tell you honestly if an overlay is reasonable for your roof.
Metal runs $15,000 – $40,000, and tile is priced per square after measurement, with most repairs at $600 – $2,500. Call (888) 255-9354 for an exact quote; estimates are free.
Every job carries the 730-Day Done Right Promise, on top of the manufacturer warranty on the roofing material itself. If something isn’t done right, we make it right.
Get a free specialty roofing estimate in Anaheim
Call (888) 255-9354 and a live person answers, day or night. We’ll set a time to measure the roof, check the deck, and hand you a line-item written estimate for specialty roofing in Anaheim. No pressure on the call, no change orders later.
Written by the team at Groundwork Construction Co.












