







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Anaheim: What It Costs and How Long It Takes
A tub-to-shower conversion in Anaheim usually runs $3,500 to $10,000 and takes three to five working days once materials are on site. The job means removing the tub, reworking the drain and valve wall, waterproofing the wet area, and setting a new shower pan and tile, all inspected under an Anaheim building permit. Call (888) 255-9354 for a free on-site estimate. We’ll measure the alcove, check what’s behind the tub, and put the number in writing before anything gets demoed.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage

Every conversion follows the same five stages. What changes is how much repair hides behind the tub once it’s out. Here’s the real sequence.
Stage 1: Measure, probe, and lock the scope (day of estimate)
We measure the alcove inside face to inside face, check the valve wall for the shower head and controls, and open the access panel if one exists to see the drain and trap. On older Anaheim homes we also check whether the tub drain is galvanized steel (common in pre-war and post-war builds) because a corroded trap has to be replaced while the floor is open. You decide the pan type, tile, and glass at this stage, not later. That’s what keeps the schedule honest.
Stage 2: Demo and rough-in inspection (day 1)
Out goes the tub, the surround, and the old valve trim. We cut the drain to fit a centered shower pan and, if you’re changing valve type, swap the rough-in valve so everything is new behind the wall. The building inspector looks at the drain connection and waterproofing prep before anything is covered. In Anaheim this pass is part of the permit, not optional. You don’t decide anything here except whether to add a niche or bench while the wall is open.
Stage 3: Waterproofing and pan (day 2)
We build the pan, set the slope, and apply a bonded waterproofing membrane over the walls and floor, then flood-test the pan before tile goes down. This is the stage that determines whether the shower lasts twenty years or five. You’ll see photographs of the membrane before it’s buried; ask for them on any conversion quote.
Stage 4: Tile, glass, and trim (days 3 – 4)
Wall tile, floor tile, grout, caulk at the changes in plane, glass panel or door, and the fixture trim. You choose grout color and glass type; everything else was decided at estimate. Expect this stage to take two days on a standard 60-inch alcove and three on a larger conversion with a bench or niche.
Stage 5: Final inspection and walkthrough (day 5)
The inspector signs off, we run a full leak test, and we walk the shower with you. We check the caulk lines, the glass alignment, and the drain flow before we call it done. That walkthrough is when the 730-Day Done Right Promise gets handed over in writing, so if anything fails in the first two years we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the cost spread on a tub-to-shower conversion comes down to five decisions. Here they are with the honest trade-offs.
- Acrylic or fiberglass pan-and-wall kit ($3,500 – $5,500 installed): Fast, warm underfoot, seamless. It shows scratches sooner and can’t be repaired as cleanly as tile. Best when you need a durable shower and want to stay near the low end.
- Tile the whole wet area ($6,000 – $10,000 installed): Lasts decades, lets you match the rest of the bath, and repairs cleanly. It takes an extra day of setting and grouting and costs the most. Best for a long-hold home.
- Prefab walk-in pan with tile walls ($5,000 – $8,000): Solid foundation and less curing time, tile where it shows. A middle option that works well in 92806 ranches.
- Frameless or semi-frameless glass ($800 – $2,000 added): Frameless looks cleaner and is easier to squeegee. Semi-frameless costs less and tolerates a slightly less plumb wall, which matters in older homes.
- Grab bars and a low threshold (add $250 – $800): Worth budgeting if anyone in the house is aging in place or recovering from surgery. Best done during the build, not after.
If the shower is part of a wider scope, say you’re also replacing the vanity and floor, that’s a full Bathroom Remodeling in Anaheim and worth planning as one project. Our Bathroom Remodeling service covers that scope.
What a Tub-to-Shower Conversion Costs in Anaheim, CA

For Anaheim, a tub-to-shower conversion runs $3,500 to $10,000, and where you land depends on these variables:
- Alcove size: A standard 60-inch tub opening keeps the price low. A 48-inch or oversized opening means custom pan work, which pushes toward the top.
- Existing condition: Corroded drain traps, rot behind the surround, or a valve wall with no studs in the right place add demolition and framing time.
- Plumbing and electrical moves: Keeping the drain and valve roughly in place is the single biggest cost saver. Relocating the shower head to the opposite wall, or adding a niche, costs more.
- Finish grade: Acrylic kits sit at the bottom. Porcelain tile with a custom niche, frameless glass, and a linear drain sit near the top.
- Permit scope: A straight tub-to-shower swap needs a straightforward Anaheim permit. Structural or electrical changes widen it.
A written estimate includes the permit, demo, drain and valve connection, waterproofing, tile or kit, glass, and the final inspection. It typically doesn’t include hidden rot repair, a new vanity, or tile outside the shower, which we price separately with no change orders. That’s the upfront pricing, no surprises approach: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Anaheim Homes Specifically Do to This Job
Anaheim isn’t one housing market, it’s two, and the split runs straight through this job. In the Colony District and the older grid around 92805, bathrooms are small and the tub drains are often galvanized. Pre-war bungalows there mean a five-day conversion can turn into six when the trap needs replacing. Central and east Anaheim – 92806 and 92807 – are post-war and 1960s ranch tracts where the standard 60-inch alcove is the norm and the work is predictable. Anaheim Hills adds slope and longer material runs, but the tub alcoves are usually newer. All of this gets permitted through Anaheim’s own building division, not the county, and the inspection sequence is set here. Because Anaheim runs hot, dry summers and Santa Ana wind events, we also schedule tile setting and grout so the mix doesn’t flash-dry, which matters more than most homeowners expect. If you’re redoing the bath and pairing it with exterior work, homeowners often pair this with Tile Roofing in Anaheim or Metal Roofing in Anaheim while crews are already on site. We cover all of Anaheim and the surrounding ZIPs 92807, 92817, 92806, and 92899.
Serving Anaheim, CA – Our Local Coverage Area
We serve Anaheim and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Tub-to-Shower Conversion in Anaheim

Plan on three to five working days on site, plus lead time for tile and glass. A standard acrylic kit conversion is often done in three. Tile with custom niche and a frameless door takes five. Add one day if the drain trap or framing needs repair once the tub is out. Call (888) 255-9354 for a schedule based on your actual shower.
Yes. Converting a tub to a shower changes the drain and typically the valve, and Anaheim’s building division requires a permit and inspection for that work. We pull it and coordinate the rough-in and final inspections. Skipping it can stall a future sale when a buyer’s inspector spots unpermitted plumbing.
In most Anaheim homes, yes. Keeping the drain and valve in roughly the same spot is normal and keeps you near the $3,500 end. Moving the shower head to a different wall, adding a bench, or widening the alcove pushes it higher and can require a structural review. We confirm which category your bath falls into at the free estimate.
Between $3,500 and $10,000, depending on finish grade, alcove size, and what’s behind the tub. Acrylic kits land low, full tile with frameless glass lands high. Call (888) 255-9354 for a written line-item estimate; estimates are free and there’s no obligation.
Every tub-to-shower conversion we do is covered by the 730-Day Done Right Promise, our two-year workmanship guarantee. If a caulk joint fails, glass drifts out of alignment, or waterproofing leaks within that window, we come back and make it right. The number to call for that is (888) 255-9354, answered live 24/7 by a real person.
Ready for a Tub-to-Shower Conversion in Anaheim?
Call (888) 255-9354 to book a free on-site estimate. We’ll measure the alcove, look behind the tub, and hand you a written, line-item quote with the permit included and the 730-Day Done Right Promise attached. You also get $1,000 off any project over $10,000, plus 0% financing for 18 months if you want to spread it out. No pressure, no surprises. Just a straight answer on what your shower swap costs and how soon we can start.
Written by the team at Groundwork Construction Co.












