







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Irvine, CA: What They Cost and What the Job Actually Involves
A paver driveway in Irvine costs $7,000 – $18,000 for most homes, and a typical two-car driveway takes three to five working days from demolition to the first drive-on. The work is excavation, a compacted base, edge restraint, then pavers laid and sand-set. Irvine is master-planned HOA territory, so approval usually runs longer than the build. Call (888) 255-9354 for a free on-site estimate.
Stage by Stage: How a Paver Driveway Gets Built

Every job moves in the same order. What changes is the base depth, the paver choice, and how much of the existing driveway has to come out first.
1. Site walk and drainage plan (day 1, half a day)
We measure the driveway, check the slope away from the garage, and find where water currently goes. Irvine sits on clay-heavy soils in several villages, and a driveway that drains toward the garage is the most common problem we correct. You decide the paver family and pattern at this stage, not later, because the base and edge details depend on it.
2. Demolition and haul-off (day 1, one day)
Existing concrete or asphalt comes out, along with the old base. On a 400 sq ft driveway that’s roughly 6 – 8 tons of material leaving the site. We protect the garage apron and stucco edges before anything starts swinging.
3. Excavation and base build (days 2 – 3)
We excavate to a depth of 6 – 8 inches for a residential driveway and compact the subgrade, then lay class II base in 2 – 3 inch lifts, compacting each one. This is the stage that decides whether the driveway looks the same in ten years. Skipping compaction is why pavers rut and shift, and it’s the single most common shortcut we’re called out to fix.
4. Edge restraint and paver laying (days 3 – 4)
Concrete or plastic edge restraint goes in before the field. Pavers then go down in your chosen pattern, cut around curves and the apron. You’ll want to walk the layout before sand goes in.
5. Joint sand, compaction, and cleanup (day 4 – 5)
Polymeric or regular joint sand fills the gaps, a plate compactor seats everything, and we sweep and wash down. Drive-on is usually fine within 24 hours. Your written estimate covers haul-away, base, pavers, edge restraint, and sand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’re Actually Choosing Between
- Concrete pavers (Belgard, for example): the standard for Irvine driveways. $7,000 – $18,000 installed, holds color well in sun, resists the Santa Ana heat. Sealed or unsealed both work.
- Clay brick pavers: the premium end of the range. Beautiful against stucco and tile roofs, but costs more and requires more careful base work because brick is less forgiving of settlement.
- Permeable pavers: worth considering if your HOA or the city flags drainage. They cost slightly more than standard pavers but handle the rare intense storm without ponding.
- Paver size and pattern: large-format pavers laid in a running bond read clean and modern; smaller units in a herringbone hold up better on a slope and hide tire marks.
- Border and accent band: a contrasting soldier course adds roughly a few hundred dollars on a typical Irvine driveway and visually anchors the apron.
If the driveway is part of a full Driveway & Pavers in Irvine project that includes walkways or a patio, we quote it as one job so the base prep and haul-off aren’t paid for twice.
What Paver Driveways Cost in Irvine, CA

Expect $7,000 – $18,000 installed for a residential paver driveway in Irvine. Here’s what moves the number:
| Scope | Typical Range |
|---|---|
| Paver driveway installation, standard 2-car | $7,000 – $12,000 |
| Paver driveway, large or premium brick | $12,000 – $18,000 |
| Driveway sealing (after install or later) | $250 – $700 |
| Driveway replacement, if full demo is needed | $5,000 – $14,000 |
The low end is a clean 300 – 400 sq ft driveway with standard concrete pavers and an easy demo. The high end is a 600+ sq ft driveway, tight access, an HOA-required pattern or border detail, or a base that needs extra excavation because the old slab was set too high. Permits and any HOA submittal fees add to the total. Our written estimate lists each line, and the number you see is the number you pay.
Our Driveway & Pavers service covers the full scope if you need patios or walkways matched to the same pavers.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to This Job
Irvine is almost entirely Irvine Company master-planned tract and village housing built from the 1970s forward, mostly Mediterranean stucco with tile roofs, in villages like Woodbridge, Northwood, and Turtle Rock. That matters here because nearly every exterior change runs through a village association’s architectural review before you touch the driveway. A paver driveway is an exterior change. Plan on submitting a material sample and layout drawing, and plan on that approval sitting in front of your build schedule. In Turtle Rock and Quail Hill, where homes sit near open-space edges, the Santa Ana wind season pushes homeowners toward ember-resistant detailing and non-combustible edge treatments, and we size drainage for the rare intense storm rather than the usual dry year. The uniform build era also means most driveways here are original concrete at the end of its life, and the apron and garage slab are usually in better shape than the driveway itself, so a replacement over existing concrete is common. We cover Irvine and the surrounding villages, and you can see the wider area on our Irvine service page.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Irvine

Three to five working days for a standard two-car driveway, plus whatever time your village association’s architectural review takes. If you’re in a planned community, start that submittal first so the approval isn’t the delay. Call (888) 255-9354 and we’ll walk you through the timeline for your specific street.
Most straight paver replacements over an existing driveway footprint don’t require a building permit, but you should confirm with the city before work starts, and a full replacement or any change to grading may trigger one. HOA design review is almost always required regardless. We pull permits where they’re needed and pass inspection. Call us to confirm what your property needs.
Sometimes, if the existing concrete is sound and the added height won’t block the garage door or create a drainage problem. We’ll measure the clearance when we do the site walk. If the old base is failing, we recommend a full removal, and the estimate will show both options so you can decide.
Not on our jobs. The written line-item quote is the price, and change orders only happen if you ask for something new, like adding a border or extending the run. Upfront pricing, no surprises. Call (888) 255-9354 for an exact quote and a free estimate.
Every driveway we install is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s backed in writing. Call for a free estimate and the full warranty terms.
Schedule Your Free Paver Driveway Estimate
Call (888) 255-9354 to book a free on-site estimate for paver driveways in Irvine. A live person answers, 24/7. We’ll measure the driveway, check the slope and base, flag any HOA submittal you’ll need, and leave you with a written line-item quote. If the project grows into a larger build, homeowners often pair this with ADU Design & Permitting in Irvine or a Garage Conversion ADU in Irvine. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available.
Written by the team at Groundwork Construction Co.












