







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Irvine, CA: What It Takes and What It Costs
A tub-to-shower conversion in Irvine, CA runs $3,500 – $10,000 for most single-bathroom jobs, and the typical project takes 5 to 10 working days from demo to final inspection. Irvine’s tract and village homes, with their consistently sized alcoves and relatively few surprises behind the drywall, are some of the most predictable conversions we do. Call (888) 255-9354 and we’ll schedule a free on-site estimate and walk you through the actual numbers before anything gets ordered.
How a Tub-to-Shower Conversion Actually Goes, Stage by Stage

We don’t guess at the sequence. Here’s exactly what happens from the first morning to the final walkthrough, and where you’ll be making decisions along the way.
Stage 1: Site measurement and fixture layout (day 1)
We measure the alcove, map the existing drain and supply locations, and confirm the shower pan size that fits without moving the drain. Roughly two hours. Your decision here: shower pan dimensions and whether you want a linear drain (easier slope, more expensive) or a center drain that matches the existing rough-in.
Stage 2: Demo and inspection (days 2 – 3)
The old tub, surround, and any drywall behind it come out. We check the studs, the subfloor, and any moisture damage or old leaks. You decide nothing at this point unless we find rot or a compromised subfloor, in which case we stop and give you a written number before we continue.
Stage 3: Rough-in plumbing and waterproofing (days 3 – 5)
New valve, shower diverter, and drain get set. We install a cement backer board and a waterproofing membrane over the walls and pan. Your decision: whether you want a niche recessed into the wall (typical add, $150 – $400) or a standard shower caddy arrangement. We also set blocking here for any grab bars you plan to add later.
Stage 4: Tile, glass, and fixtures (days 5 – 8)
Tile goes on. Grout and caulk cure. The shower head, trim, glass panel, and door get installed. Your decision: tile size (12×24 porcelain runs less per square foot than 3×12 handmade-look tile) and whether you’re going with a frameless glass door or a framed one.
Stage 5: Final inspection and walkthrough (days 8 – 10)
Our city inspection passes, we clean, we walk the shower with you, and we test the drain and showerhead pressure. Your decision: nothing at this stage. Just a checklist signature.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Move Your Number
Most of what separates a $3,500 conversion from a $10,000 one is the decisions below, not the labor. Here’s what you’re actually choosing between.
- Shower pan material: Pre-formed acrylic pan ($400 – $900 installed) is quick to set and easy to clean but shows scratches over time and comes in limited sizes. Custom-tiled pan with a linear drain ($1,200 – $2,600) looks like an upgraded bathroom and holds up, but requires a slightly longer schedule and more skilled labor.
- Wall system: Acrylic surround ($600 – $1,400) is fast and watertight. Porcelain or ceramic tile ($1,200 – $3,500 in materials and installation) is the finish most Irvine homeowners choose and lasts decades when waterproofed correctly.
- Glass: A framed sliding or pivot door runs $400 – $800. A frameless 3/8-inch glass panel with a hinged door runs $1,200 – $2,400 and typically needs additional structural blocking.
- Fixtures: Standard chrome trim kit or a name-brand collection you’ve seen in showrooms. Brand selection is easy to upgrade from builder-grade.
- Niche and seat: A recessed niche ($150 – $400) and a built-in bench ($400 – $1,100) are cheap options that make the shower more useful every day.
What Tub-to-Shower Conversion Costs in Irvine, CA

For Irvine, tub-to-shower conversion pricing lands at $3,500 – $10,000. That’s the range for a standard alcove conversion with tile and glass, not a full bathroom gut.
| Line item | Typical Irvine range |
|---|---|
| Demo, haul-away, drywall repair | $400 – $900 |
| Rough-in plumbing (drain relocation or valve upgrade) | $600 – $1,800 |
| Waterproofing membrane and backer | $500 – $1,200 |
| Shower pan, tile, and mud set | $900 – $2,800 |
| Tile setting (walls) | $700 – $2,200 |
| Glass, door, and fixtures | $400 – $2,400 |
| Permit and inspection | $300 – $700 |
The five variables that push a job to the low or high end are: alcove size (a standard 60-inch tub alcove runs cheapest; a 30-inch or a non-standard footprint needs custom pan work), existing condition (rot, mold, or an out-of-level subfloor adds $300 to $1,500), whether the drain has to move for a linear drain or a curbless layout (adds $400 to $1,400), tile grade and size, and whether you’re adding a niche or bench. Permits are included in our written estimate. Most jobs stay inside a fixed, upfront price, but if we open the wall and find something structural that wasn’t visible at estimate, we stop, write the new number, and give you the option to continue or not. That doesn’t happen often in Irvine’s tract homes, but when it does, you hear about it before we touch another tool.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to This Job
Irvine’s housing stock is almost entirely post-1970s master-planned construction, and that shapes this job in ways that don’t apply to older Orange County cities. The tubs in most of the village homes around Woodbridge and Northwood are original builder-installed cast iron or steel with a standard 60-inch alcove, so a conversion is remarkably predictable: the drain is centered, the framing is true, and there’s usually no lead drain or knob-and-tube wiring to deal with once the surround comes off. Turtle Rock and Quail Hill homes run the same configuration, though the attached townhomes and condos in those villages often carry short HOA approval sequences for anything that touches a shared wall or visible glazing, so we build time into the schedule for that sign-off even though it’s a short review. Interior work like a tub-to-shower conversion typically doesn’t trigger village-level architectural review the way an ADU or exterior change would, but we confirm it in writing with your association before demo. When the scope grows into vanity, flooring, lighting, or a brighter overall layout, homeowners often pair this with our Bathroom Remodeling in Irvine scope, and the pipe work we do here carries over into Metal Roofing in Irvine and Tile Roofing in Irvine planning only when an exterior package is on the table. Our teams work across Irvine including the 92623, 92606, 92614, and 92710 ZIPs, and the process runs the same whether you’re in a village tract or an attached condo.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Irvine

Plan on 5 to 10 working days from demo to final walkthrough, with tile setting and cure times accounting for most of that. A simple acrylic surround and pre-formed pan can wrap in 4 to 5 days; custom tile with a linear drain runs 8 to 10. Call (888) 255-9354 for a firm schedule on your specific bathroom.
Yes. Converting a tub to a shower modifies the plumbing and usually the drain, so it’s a permitted job with an inspection. We pull the permit and pass the inspection; the fee is included in our written line-item estimate. Call (888) 255-9354 to talk through the permit scope before you commit.
Most of the time, yes. A standard alcove conversion reuses the existing drain and supply lines, which keeps the job closer to $3,500. Moving the drain for a linear drain or curbless layout adds $400 to $1,400 and lengthens the schedule by a day or two. Call (888) 255-9354 and we’ll measure your alcove and tell you which path fits.
The range for Irvine is $3,500 – $10,000, with the median around $6,000 for a tile-and-glass conversion with a custom pan. Glass, tile grade, niche, and bench are the biggest swing items. Call (888) 255-9354 for an exact quote – estimates are free and line-itemized.
Every conversion is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on the pan, waterproofing, tile, and plumbing install for two years. The manufacturer warranty covers the fixtures and glass. Call (888) 255-9354 with any warranty question and a live person will answer, day or night.
Get a Free Tub-to-Shower Conversion Estimate in Irvine
Call (888) 255-9354 to schedule your free on-site estimate. We’ll measure the alcove, check the drain and framing, and hand you a written line-item quote that says what we’ll do and what it costs. You’ll see the permit, demo, waterproofing, tile, and glass listed separately. A live person answers every call. No pitch, no pressure, just numbers you can plan around.
Written by the team at Groundwork Construction Co.












