







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Laguna Hills: What It Costs and How Long It Takes
Backsplash, tile and flooring work in Laguna Hills runs $14,000 – $45,000 for a full kitchen-scale project, with a backsplash alone at $800 – $2,500 and tile flooring priced by the square foot. Most jobs take five to fifteen working days depending on square footage, substrate condition, and whether floors and backsplash are done together. Call (888) 255-9354 for a free on-site estimate with line-item pricing.
Key takeaways
- Backsplash-only projects are typically a two to three day job; tile flooring is where the schedule stretches.
- In 92653, the biggest cost driver isn’t the tile you pick – it’s what’s under it. Original 1970s slab and old mastic thinset add prep days.
- A written estimate separates demo, substrate prep, setting materials, tile, grout, and trim so you can see exactly where the money goes.
- Tile flooring over a failed substrate will crack within a season. We check flatness and deflection before we ever set a tile.
How we run a tile and backsplash job, stage by stage

Tile work fails or succeeds in the prep. Here’s the actual sequence we follow, with real durations, so you know what’s happening on your floor each day.
Stage 1: Demo and substrate inspection (1 – 2 days)
We remove the old backsplash, flooring, and thinset down to the substrate. On Laguna Hills tract homes from the 1970s, that often means a layer of old mastic or a mortar bed that comes up harder than expected. Once it’s bare, we check the slab or subfloor for flatness, cracks, and moisture. This is where you learn whether the job is a straightforward reset or needs substrate work.
Stage 2: Substrate prep and layout (1 – 2 days)
Crack isolation membrane, self-leveling compound, and backer board go down where needed. Then we lay out the tile grid and dry-fit the pattern. You approve the layout and grout line width before anything is permanently set. Getting this decision right here saves an expensive redo later.
Stage 3: Backsplash installation (1 – 2 days)
We set the backsplash tile, cut around outlets and window trim, and account for where the countertop meets the wall. If you’re choosing a mosaic or a herringbone pattern, this is the day the fussy cutting happens. Grout goes in after the thinset cures.
Stage 4: Floor tile installation (2 – 4 days)
Floor tile goes down in sections, with cure time between passes. Large-format tile moves faster per square foot but demands a flatter substrate. Smaller tile forgives more unevenness but takes longer to set. We walk you through which trade-off fits your floor.
Stage 5: Grout, sealing and final walkthrough (1 day)
Grout, sealant at the perimeter, baseboards or trim reinstalled, and a final walkthrough where we check every edge and joint with you. Any correction gets noted on the spot. The whole job is covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
These are the real decisions that shape both the look and the price of your job:
- Backsplash material: Ceramic and porcelain tile are the most forgiving on budget and easy to clean. Glass mosaic adds depth but shows streaks. Natural stone (travertine, marble) looks rich but needs sealing and stains faster near the cooktop.
- Tile size and format: Standard 3×6 subway is the fastest and cheapest to install. Large-format floor tile (24×24 and up) looks modern and hides grout lines but requires a very flat substrate. Small hex or penny tile costs more in labor because there are more cuts and more grout.
- Grout type: Cementitious grout is budget-friendly but needs sealing and can stain. Epoxy grout costs more up front but resists staining and doesn’t need resealing – usually worth it in a kitchen.
- Flooring material: Porcelain tile is durable and water-resistant. Luxury vinyl plank is warmer underfoot and quicker to install. Natural stone tile is premium but heavier and needs a stiffer subfloor.
- Layout pattern: Straight-set is the simplest. Herringbone and chevron add visual interest but raise labor. A border or accent strip is a design decision worth making early.
We help you weigh cost against durability and upkeep, and we don’t push the most expensive option. If you’re planning to also redo the cabinets, see our Kitchen Remodeling in Laguna Hills page for how tile work fits the wider scope.
What Backsplash, Tile & Flooring costs in Laguna Hills, CA

Here’s the range we quote in Laguna Hills, broken out by line item:
| Item | Price range |
|---|---|
| Backsplash installation | $800 – $2,500 |
| Tile flooring (per job) | Included in lead range below |
| Full backsplash, tile & flooring project | $14,000 – $45,000 |
Four variables push a job toward the low or high end:
- Square footage: A kitchen backsplash is one thing; a full floor plus backsplash plus a hallway is another. Larger areas reduce the per-square-foot labor rate.
- Existing condition: Old thinset, cracked slabs, or a failed mortar bed add demo and prep days.
- Material grade: Builder-grade porcelain versus imported natural stone is a big swing. The tile itself can be a third of the total cost.
- Layout complexity: Straight-set versus herringbone, and whether outlets, window trim, and cabinet edges need custom cuts.
A written estimate lists demo, substrate prep, setting materials, tile, grout, and trim separately. It doesn’t usually include structural repairs if we find rot or a cracked slab – we flag those before doing the work so there are no surprises. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Laguna Hills homes specifically do to this job
Most of Laguna Hills was built as a master-planned suburb in the 1970s around the Laguna Hills Mall and the I-5/SR-73 junction, and that build era shapes every tile job we do here. The housing stock is largely 1960s – 1980s single-family tract homes and townhomes built by the Mission Viejo Company, with Mediterranean stucco and tile roofs. The original 1970s materials are at end of life, so what we’re usually doing is second-generation remodel work: pulling up old flooring, resetting a backsplash, fixing what the first install left behind. Because entire tracts were built at once, neighbors on the same street often call us within a year or two of each other for the same kind of work. Knowing the original tract plans means we can bid faster and anticipate where bearing walls and plumbing chases sit.
Inland south Orange County’s warm, dry climate is kind to exterior work but hard on old mastic and wood subfloor near sliding doors, where seasonal expansion shows up as cracked grout and loose tile. If you’re covering Laguna Hills, Laguna Woods, Lake Forest, Mission Viejo or Coto de Caza, we work across 92653 and 92654 and handle the permit side where it applies. For a bathroom tile update, homeowners often pair this with our Tub-to-Shower Conversion in Laguna Hills, and many also refresh fixtures at the same time with Vanities, Tile & Fixtures in Laguna Hills. You can see our full Laguna Hills service area, or read about our broader Kitchen Remodeling work.
Serving Laguna Hills, CA – Our Local Coverage Area
We serve Laguna Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Backsplash, Tile & Flooring in Laguna Hills

A backsplash alone takes two to three working days. A backsplash plus tile flooring typically takes five to fifteen working days, depending on square footage and substrate condition. Call (888) 255-9354 for a timeline based on your specific job.
Cosmetic backsplash and floor tile replacement generally doesn’t require a permit. If the work touches plumbing, electrical, or structural elements, permitting applies and we handle it. We’ll tell you up front whether your job needs one. Call (888) 255-9354 to confirm.
Yes, in most cases. Backsplash and flooring are surface work and usually don’t require moving plumbing or structure. Layout changes that relocate an outlet or a sink do add scope. We flag that during the estimate so there are no surprises.
Backsplash alone runs $800 – $2,500, and a full backsplash, tile and flooring project runs $14,000 – $45,000 depending on square footage, substrate condition, material grade, and layout complexity. Call (888) 255-9354 for an exact quote – estimates are free.
Every job we do is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. The setting materials and workmanship are both covered under that guarantee. Call (888) 255-9354 to ask what the warranty means for your specific job.
Get a free estimate for Backsplash, Tile & Flooring in Laguna Hills
Call (888) 255-9354 for a free on-site estimate. We’ll walk the space, check the substrate, and give you a written line-item price before any work starts. Ask about our 0% financing for 18 months and $1,000 off projects over $10,000. A live person answers the phone, and estimates are free.
Written by the team at Groundwork Construction Co.












