







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Laguna Hills, CA: What It Costs and How Long It Takes
A tub-to-shower conversion in Laguna Hills runs $3,500 – $10,000 and takes most homes 5 to 9 working days from demo to final inspection. The job means pulling an existing tub and its surround down to the studs, reworking the valve and drain to a shower pan, then rebuilding with tile, a pan liner or a prefab base. Call (888) 255-9354 for a free on-site estimate before you commit to anything.
How the conversion actually runs, stage by stage

Every conversion follows the same five movements. What changes between homes is how much hidden damage shows up once the wall comes open.
- Day 1, measure and protect. We photograph the bathroom, shut the water at the fixture stops, and set floor protection through the hallway. You decide the footprint (30×60 is the common drop-in replacement; 36×60 or a curbless pan needs more framing work) and rough-in location. This is also when you pick the valve trim, so it can be ordered the same week.
- Days 1 – 2, demolition. The tub comes out, the tile or fiberglass surround goes to the studs, and the old drain is cut back. We open the wall at the valve to inspect the supply lines. On 1970s Laguna Hills tract homes this is where we find out whether the original plumbing is still serviceable or needs a short re-pipe behind the wall. You approve any scope change in writing before we continue.
- Days 2 – 4, rough-in and inspection. We set the new shower valve, rework the drain to the new pan location, add blocking for grab bars and a bench, and hang cement backer board. The municipal inspector checks the rough plumbing and pan before anything gets covered. Nothing is tiled until that inspection passes.
- Days 4 – 7, waterproofing and tile. A bonded waterproof membrane or a sloped pan liner goes in, then the tile or a solid-surface wall panel. You decide grout color, tile format, and whether you want a niche or a corner shelf. Glass gets templated now, usually a 5 to 7 day fabrication lead.
- Days 7 – 9, trim and final. Valve trim, showerhead, glass install, caulk, and a final inspection. We walk the job with you, confirm the drain runs clear and the pan holds no standing water, and hand over the warranty paperwork.
You make three real decisions: footprint and valve on day one, tile and glass by day four, and none after that. We hold the rest.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that fill the estimate
The conversion is mostly a shell job. The number moves on what you put in it.
- Shower base: a prefab acrylic pan is the quickest and least expensive, and it’s fine for a rental or a spare bath. A mud-set tile pan costs more but is the standard for a primary bath and lets you match the floor tile exactly.
- Wall finish: ceramic or porcelain tile is the durable, repairable default. Large-format porcelain reads clean and modern but needs more substrate prep. Solid-surface or acrylic wall panels go up fast and wipe down easily, though they can’t be patched the way tile can.
- Valve and trim: a pressure-balance valve is the baseline. A thermostatic valve with a separate volume control costs more and buys you precise temperature control, which matters if the shower shares a wall with a teenage bathroom schedule. Kohler is a name worth asking for here.
- Glass: a framed slider is the budget choice; a frameless fixed panel with a hinged door costs roughly double and needs the framing and tile to be dead flat. Skip frameless if your wall is badly out of plumb.
- Grab bars and blocking: adding the blocking now costs a fraction of opening the wall later. Worth doing even if you don’t install the bars yet.
If the conversion is the first phase of a larger scope, our Bathroom Remodeling in Laguna Hills page covers the rest of the room.
What Tub-to-Shower Conversion costs in Laguna Hills, CA

Plan on $3,500 – $10,000. Most Laguna Hills jobs land between $5,500 and $8,000, and here’s what pushes one toward either end:
- Footprint change: keeping the tub’s 30×60 opening keeps the drain where it is. Moving to a wider or curbless pan means moving the drain, which adds plumbing rough-in and usually a longer inspection path.
- Hidden plumbing: original galvanized supply lines or a rusted drain assembly behind the wall can turn a one-week job into a two-week job with a short re-pipe. We only know once the wall is open, and we price it before touching it.
- Material grade: a prefab pan with porcelain tile and a framed glass door sits near the low end. A mud-set pan, large-format tile, frameless glass, and thermostatic trim push toward the top.
- Permit scope: a straight fixture swap with no drain or valve move still needs a permit in most cases. Relocating the drain or valve adds an inspection and a little timeline.
- Structural or electrical: a bench niche, a soffit change, or a new exhaust fan circuit all add line items.
A written estimate from us lists the demo, rough-in, waterproofing, tile, glass, trim, permit, and inspection fees as separate lines, so you can see exactly what you’re paying for. Upfront pricing, no change orders unless you approve a scope change in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Laguna Hills homes specifically do to this job
Nearly every conversion we do in Laguna Hills is on a 1960s – 1980s tract home or townhome built by the Mission Viejo Company, with the original plumbing still behind the tile. Those homes were built all at once, which means the showers in a given neighborhood hit the same failure age together. In 92653 you’ll often find the valve wall opened up at the same time as the neighbors down the street, because the same era of galvanized and early copper supply line is giving out across the tract. Tracts off Alicia Parkway and around the old Laguna Hills Mall corridor share those original plans, and knowing where the bearing walls and plumbing chases sit lets us bid faster and anticipate what we’ll find. Between the master-planned floor plans and the plumbing that’s now reaching end of life, the conversion is as much a plumbing job as it is a finish job, and the permit and inspection path is part of how we make sure it’s done right. The dry inland climate means UV and seasonal expansion dry out caulk and grout faster than on the coast, so we spec flexible sealants and proper waterproofing instead of relying on grout alone. We serve all of Laguna Hills and the neighboring communities.
Serving Laguna Hills, CA – Our Local Coverage Area
We serve Laguna Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Tub-to-Shower Conversion in Laguna Hills

Most Laguna Hills conversions take 5 to 9 working days from demo to final inspection, with glass fabrication adding a short wait in the middle. Call (888) 255-9354 and we’ll give you a schedule based on your actual bathroom.
Yes, nearly always. Moving a drain or valve, adding a shower pan, and changing the plumbing rough-in all fall under permit and inspection. We pull the permit and pass the inspections; that work is in the written estimate, not tacked on later.
Usually yes. If your bathroom already has a 30×60 tub, a same-size shower pan lets the drain stay put, and the valve stays on the same wall. That’s the least expensive path. Moving the drain only happens if you want a curbless or wider footprint, and we price that separately before we start.
Expect $3,500 – $10,000, with most jobs landing between $5,500 and $8,000. The variables are footprint, hidden plumbing, material grade, and permit scope. Call (888) 255-9354 for a free on-site estimate and a line-item price.
Every conversion we do is covered by our 730-Day Done Right Promise: if the workmanship isn’t right, we make it right, for two full years. That covers the waterproofing, tile, and plumbing rough-in we install, and it’s backed in writing. Our technicians have up to 12 years of experience, and the estimate and consult are free.
Get a free tub-to-shower estimate in Laguna Hills
Call (888) 255-9354 and a live person answers, any hour. We’ll set a free on-site estimate, measure the bathroom, and go through the footprint, valve, and tile options with you before any number is written down. You get a line-item price with permits and inspection fees included, and you’ll know exactly what your Laguna Hills conversion will cost before we touch a wall.
Written by the team at Groundwork Construction Co.












