







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Irvine: What the Job Actually Involves
Impact windows and doors in Irvine typically run $8,000 to $25,000 for a full-house package, and a single-story install usually takes two to four days from demo to final inspection. The job replaces your existing glazing with laminated or laminated-plus film units rated for wind-borne debris and paired with reinforced frames and multi-point locking doors. Call (888) 255-9354 for a free on-site estimate and a written line-item price before anything gets ordered.
How We Run an Impact Window & Door Install, Stage by Stage

Impact work is not a swap. The frames, anchors, flashing and door hardware all have to meet the rating, and the sequence matters more than the product name on the glass.
Stage 1 – Measure and submittal (week one). We measure every opening, check the existing wall depth and stucco condition, and confirm which units are in the fire-edge zones near Turtle Rock and Quail Hill. You decide frame material and glass package here. In Irvine, the HOA architectural submittal often goes in before the city permit, and that review is what sets the calendar, not us.
Stage 2 – Permit and HOA sign-off (two to four weeks, sometimes longer). We prepare the product approval paperwork and elevations for your village association and pull the city permit once the association approves. You sign off on the final product schedule at the end of this stage so nothing is ordered against a plan that still might change.
Stage 3 – Order and lead time (four to eight weeks). Impact units are built to size. This is the long pole. You confirm hardware finish and door swing direction now, because changing either after fabrication means a reorder.
Stage 4 – Demo and install (one to three days for windows, one to two days for doors). One room at a time, plastic and drop cloths down, old units out, new frames set, shimmed, anchored and flashed. Doors get the multi-point hardware dialed in and tested. We keep at least one exterior door usable overnight.
Stage 5 – Stucco patch, sealant and inspection (one to three days). Patch, texture match and paint-ready finish, then the city inspection. You walk the job with us and get the signed-off permit and the 730-Day Done Right Promise in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the buying decision happens in three places: frame material, glass package, and door hardware.
- Vinyl frames – the workhorse. Lowest cost, good thermal performance, fine for most Irvine tract homes. Limited color range, and it can’t be painted to match a strict HOA palette.
- Aluminum frames – slimmer sightlines and a stronger structural rating, which matters on larger openings and on doors. Costs more and conducts heat, so it needs a thermal break to perform well.
- Fiberglass and wood-clad frames – the best look on a Spanish-revival stucco elevation and paintable to any association-approved color. Highest cost and the most maintenance over a long horizon.
- Glass packages – laminated glass is the baseline for debris resistance. A laminated-plus-film or multi-layer assembly raises the rating and the price; low-E coatings help with heat gain, which is a real factor on west-facing walls in Northwood.
- Door hardware – multi-point locking is what earns the door its rating. Cheap hardware is where impact doors fail inspection, so this is not the place to save.
Brands we specify include Andersen and Marvin on the higher-end frames, and James Hardie trim where the exterior detail calls for it. Our technicians have up to 12 years of experience on impact assemblies, and the specifications are written into the estimate before you commit.
What Impact Windows & Doors Cost in Irvine, CA

A full impact window and door package in Irvine lands between $8,000 and $25,000. That spread is real, and it comes down to a short list of variables.
| Line item | Typical range |
|---|---|
| Full impact window package | $8,000 – $25,000 |
| Standard window replacement (non-impact) | $4,500 – $15,000 |
| Single impact entry door (supply and install) | Quoted inside the package |
What pushes a job to the high end: large sliders and picture windows (glass area drives cost faster than count), aluminum or wood-clad frames over vinyl, multi-point door hardware, homes with deep stucco returns that need re-framing, and openings in the fire-edge villages where the assembly rating has to be documented more thoroughly.
What keeps it at the low end: standard-sized openings, vinyl frames, a single-story tract home with sound existing framing, and a package ordered all at once instead of piecemeal.
A written estimate from us includes product, labor, demo, disposal, flashing, sealant, stucco patch, permit and inspection. What it typically does not include: interior paint and drywall repair beyond the opening, structural re-framing if the wall isn’t square, and HOA submittal fees, which the association sets, not us. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to This Job
Almost all housing in Irvine is post-1970s master-planned tract and village development, so the framing is consistent and the openings are standardized – that part is friendly. The gauntlet is approvals. Irvine was built largely by the Irvine Company, and construction here means working inside tightly governed village associations and architectural-review processes. Even a window swap in Woodbridge or Northwood starts with a design submittal to the association before the city sees a permit application. If you’re folding impact windows into a broader exterior change, it’s part of a full Windows & Doors in Irvine scope, and the HOA packet grows accordingly.
The climate angle is the other half. Irvine runs semi-arid coastal Orange County weather with hot, dry Santa Ana wind events and very little rain. That means wildfire-hardening is the real driver for impact work on homes near the open-space edges at Turtle Rock, Quail Hill and Orchard Hills – ember-resistant vents, defensible-space detailing and rated assemblies. Inland villages see less of that urgency but the same wind loading on large sliders. Our Windows & Doors service covers the full exterior envelope, and we work across Irvine including ZIPs 92612, 92603, 92616 and 92618. Homeowners often pair this with Aluminum Fence in Irvine or Iron Fence in Irvine when the exterior is getting a coordinated pass.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in Irvine

Plan on two to four days of actual install for a typical single-story home, but the full timeline from first measure to final inspection is usually eight to fourteen weeks because of HOA architectural review, city permitting and fabrication lead time. Call (888) 255-9354 to get a calendar mapped to your specific village.
Yes. Window and door replacement requires a city permit, and in Irvine it also requires HOA architectural approval before the permit is issued. We handle both the submittal and the inspection and hand you the signed-off permit at the end.
In most Irvine tract homes, yes – impact units go into the existing openings with no structural or plumbing changes. The exception is a wall that isn’t square or an opening being enlarged, which we flag during measurement so there are no surprises mid-job.
A full package runs $8,000 to $25,000 depending on frame material, glass rating, opening size and door hardware. Call (888) 255-9354 for an exact quote – estimates are free.
Every install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. Manufacturer glass and frame warranties pass through to you, and we hand over the paperwork at final walkthrough.
Get a Free Impact Windows & Doors Estimate in Irvine
Call (888) 255-9354 for a free on-site estimate and design consult on impact windows and doors in Irvine. A live person answers around the clock, we measure every opening, and you get a written line-item price with the permit scope spelled out before you sign anything. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available. Background-checked, uniformed technicians on every job.
Written by the team at Groundwork Construction Co.












