







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What an Iron Fence Costs in Irvine, CA, and How Long It Takes
Wrought iron fence installation in Irvine typically runs $3,500 to $9,000 for a standard residential run of 100 to 150 linear feet, and most jobs are finished in 2 to 4 working days once the material is on hand. The work involves setting posts in concrete, welding or bolting panels to code, and passing a city and association inspection before we hand you the keys. Call (888) 255-9354 for a free on-site estimate and a written, line-item number.
How We Install an Iron Fence Here, Stage by Stage

Every iron fence job in Irvine follows the same five stages. Here’s what actually happens and when we need a decision from you.
Stage 1: Site walk and design review (day 1, about 90 minutes)
We walk the property line with you, confirm the exact fence run, and check what’s underground before anyone digs. You decide the iron style and height at this stage so the written proposal matches what you pictured. If your home sits in a village association, we confirm the design submittal requirements now, because that approval runs on its own clock.
Stage 2: Utility locate and HOA submittal (days 1 to 5)
We call for a utility locate so no one strikes a gas or irrigation line, and if your association requires architectural approval, we prepare the submittal drawings with the fence spec. This is the stage that most often sets the schedule back, not the build itself. You’ll want to sign off on the submittal package within a couple of days so we don’t lose the approval window.
Stage 3: Demolition and post setting (day 1 or 2 of build, one day)
Old fence comes out, stakes go in, and holes get dug and poured with concrete post footings. This is the day you’ll see the most mess on the property. Posts cure for a day before panels go on.
Stage 4: Panel installation and welding (day 2 or 3)
Rails and pickets get set, aligned, and welded or mechanically fastened per the spec you chose. Gates get hung and tension-checked. We measure every gap and confirm clearances before we call it done.
Stage 5: Inspection and walkthrough (day 3 or 4)
Final inspection, a walkthrough with you, and the warranty paperwork. You sign off, and we hand back the site clean. Most Irvine jobs are finished inside a week from first day on site to final inspection.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Iron Fence Options You’ll Choose Between
Not all iron fence is created equal, and the material choice is what drives most of the price gap. Here’s what we’d put in front of any Irvine homeowner.
- Powder-coated steel vs. true wrought iron – powder-coated steel is the value pick, rust-resistant, and runs at the low end of our range. True wrought iron (heavier, hand-forged character) costs more and lasts longer, but you’ll feel the difference in the price.
- Height (4 ft, 5 ft, 6 ft) – 4-foot is common for decorative front-yard runs; 6-foot is the norm for side and back privacy. Codes and association rules apply, and we check both before finalizing the height.
- Picket spacing and finial styles (spear, ball, flat) – picket spacing affects the security and visual weight; finial style is largely cosmetic. Choose what fits your home’s architecture and association guidelines.
- Post-mounted vs. wall-mounted panels – post-mounted is standard and self-standing. Wall-mounted panels save concrete work but depend on the existing wall’s soundness.
- Gate hardware and automation – manual swing gates are the default. Automated gates are a real cost add and need their own electrical run and inspection.
What You Pay For, and the Variables That Move the Number

The $3,500 to $9,000 range for a standard Irvine run moves on five factors:
- Linear footage and layout – a straight run is cheapest; corners and tight lot lines add fabrication time.
- Material grade – powder-coated steel vs. true wrought iron, and gauge of the pickets.
- Existing fence condition and site access – demo and hauling, plus whether we can get equipment in.
- Gate count and hardware – each gate is its own build and adjustment.
- HOA and city permit scope – design review and inspection add time; if the submittal needs modification, that’s a cost.
Our written estimate lists the footage, material spec, gate count, footing spec, permits, and haul-away as separate lines. If it’s not on the estimate, it’s not in the price. The number you see is the number you pay, and the work is covered by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to This Job
Irvine is a master-planned city, built almost entirely by the Irvine Company from the 1970s onward. That means the iron fence job here almost always involves working inside a village association’s architectural-review process. In Woodbridge, Northwood, and Turtle Rock, the design submittal happens before a permit is pulled, and it can add a couple of weeks to the schedule. We also account for the semi-arid coastal climate and the Santa Ana wind events that drive wildfire-hardening work near the open-space edges of Quail Hill and Orchard Hills, which often shapes the fence spec and defensible-space approach. If your job is part of a larger Fence Installation in Irvine project, we sequence both together. Covering ZIPs 92612, 92603, 92616, and 92618, our Irvine crews work with the local review requirements in mind. Homeowners often pair this with Patios, Walkways & Pool Decks in Irvine for a matched outdoor look, and sometimes with ADU Design & Permitting in Irvine when the fence lines a new addition.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Iron Fence in Irvine

Most jobs take 2 to 4 working days on site, plus 1 to 3 weeks for HOA design review and permits if your association requires them. The build itself is quick; the review is the part that sets the overall calendar. Call (888) 255-9354 and we’ll walk through your association’s timeline.
Yes, a building permit is typically required for a fence over a certain height or along a property line, and your village association likely requires architectural approval as well. We handle the submittal and pull the permit for you. Call (888) 255-9354 to confirm what your specific lot needs.
In almost every case, yes. We call for a utility locate before digging, so the fence footings are placed to avoid any buried lines. If the layout does come up against a line, we adjust the post location rather than relocate the utility. Call (888) 255-9354 and we’ll talk through your site.
Our range is $3,500 to $9,000 for a standard residential run, and the final number depends on footage, material grade, gate count, and whether HOA review is required. Every estimate is free and itemized. Call (888) 255-9354 for your exact quote.
All of our fence work is covered by our 730-Day Done Right Promise. If a weld fails or a footing shifts within that window, we make it right. Call (888) 255-9354 to schedule your free estimate and get the warranty in writing.
Get a Free Iron Fence Estimate in Irvine
Call (888) 255-9354 to schedule your free on-site estimate for an iron fence in Irvine. A live person answers 24/7, and we’ll come out, measure the run, check the association and permit requirements, and leave you with a written, itemized number. No surprises, no pressure. Our technicians have up to 12 years of experience, and every job is backed by the 730-Day Done Right Promise. We also offer a free design consult and $1,000 off projects over $10,000 to help the budget go further.
Written by the team at Groundwork Construction Co.












