







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Irvine, CA: What the Job Actually Costs and How Long It Takes
New cabinets and countertops in Irvine typically run $14,000 to $45,000 for a full kitchen set, with cabinet installation at $4,000 – $13,000 and countertop installation at $2,000 – $6,500 as standalone line items. Most Irvine cabinet and countertop jobs take two to four weeks from demo to final caulk, and the cabinet install itself lands in three to five working days once boxes arrive. Call (888) 255-9354 for a free on-site estimate with a written line-item number.
How We Run a Cabinet and Countertop Job, Stage by Stage

We quote the sequence up front so you can plan around it. Here’s what actually happens, in order, with the decisions you own at each step.
Stage 1: Template, measure, and order (week 0 – 1)
A technician measures the room to the sixteenth of an inch, checks wall plumb and floor level, and confirms door swing, drawer clearance, and appliance openings. You finalize the cabinet line, door style, finish, and hardware at this point. Order lead time on KraftMaid or Wellborn runs two to five weeks depending on finish and door style; semi-custom lines run longer than stock. Nothing gets ordered until you sign off on the layout drawing.
Stage 2: Demo and prep (day 1 – 2)
We pull old cabinets, disconnect the appliance, and inspect what’s behind the wall: water lines, drain location, gas stub, and the 240V circuit for the range. Subfloor and wall flatness get corrected here, because wavy walls are the single biggest reason new boxes look off. You decide at this stage whether to move the sink, add an outlet, or shift the range, and each of those changes the scope.
Stage 3: Cabinet set and leveling (day 3 – 6)
Base cabinets go in first, leveled and shimmed, then uppers hung to the same datum line. Crown, light rail, and filler panels get scribed to the wall. Doors and drawers are installed but often stay off until countertops are set, so nothing gets chipped during the templating visit.
Stage 4: Countertop template and install (day 7 – 14)
A slab counter gets templated after cabinets are in, then fabricated and installed roughly five to ten business days later. Undermount sink cutouts and faucet holes are cut at fabrication. You pick edge profile and overhang before the template, not after, because changing it later means a new slab.
Stage 5: Backsplash, punch, and final walkthrough (day 14 – 21)
Backsplash goes in last, then we reinstall doors and drawers, adjust hinges, and do the final walkthrough with you. Any punch items get scheduled and closed out under the workmanship guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Cabinet and Countertop Choices You’ll Weigh
Every option below is a real decision point on an Irvine job. We walk you through the trade-off rather than pushing one answer.
- Stock vs. semi-custom vs. full custom cabinets. Stock is fast and cheapest but sizes are fixed, so odd wall runs get filler strips. Semi-custom (KraftMaid and Wellborn both sit here) gives you width and height changes and is the sweet spot on most contracts. Full custom costs the most and buys exact dimensions and non-standard finishes.
- Plywood vs. particleboard boxes. Plywood holds screws better and takes moisture abuse longer. Particleboard is cheaper and perfectly serviceable in a dry Irvine kitchen as long as you don’t have a leak.
- Quartz vs. granite vs. porcelain slab. Quartz is non-porous and needs no sealing, which suits a busy household. Granite is natural stone and needs periodic sealing but has pattern variation quartz can’t match. Porcelain slab is thin, heat resistant, and can look like marble without the staining problem, but edge details are limited.
- Slab thickness and edge profile. 2cm and 3cm slabs both work; 3cm needs less build-up and reads heavier. A standard eased edge is included in most quotes, while a mitered or waterfall edge adds fabrication labor.
- Hardware and soft-close. Soft-close hinges and drawer slides are worth the upcharge on a kitchen you’ll open forty times a day. Undermount drawer slides and full-extension boxes make a mid-tier cabinet feel expensive.
What Cabinets & Countertops Costs in Irvine, CA

Plan on $14,000 to $45,000 for the combined job in Irvine, with the low end covering a modest galley in a Woodbridge condo and the high end covering a large open kitchen with semi-custom cabinetry and a full slab island.
| Line item | Irvine range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Backsplash installation | $800 – $2,500 |
Five variables push you toward the low or high end. Room size and cabinet count come first. Second, whether the plumbing or the 240V range circuit has to move; relocating either adds real cost and possibly a permit. Third, the cabinet line and finish grade. Fourth, the slab material and edge profile. Fifth, whether the job is part of a full kitchen remodeling scope, which bundles demo and finish work. Your written estimate lists cabinet boxes, doors, hardware, slab material, fabrication, and labor as separate lines, and excludes appliance cost and any structural or electrical work added later. Upfront pricing means the number you see is the number you pay, with no change orders unless you change the scope.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to This Job
Irvine’s housing stock shapes this work more than most cities. Almost everything is post-1970s master-planned tract and village development, so we’re rarely opening a wall in a century-old house and more often working inside a 1980s or 1990s Woodbridge or Northwood layout with a fixed galley footprint and a soffit over the uppers. Those soffits matter: many Irvine kitchens have a dropped ceiling that hides ductwork or a beam, and pulling it to get taller uppers is a decision that comes with an inspection. Attached townhomes and condos in villages like Turtle Rock also mean most jobs run through an HOA architectural-review process before anything gets demoed, and exterior vent penetrations or window changes need that sign-off in writing. On the city side, moving a sink, adding a gas line, or opening a wall can trigger a permit and inspection, so we map the scope against Irvine’s review requirements at the estimate. If you’re pairing this with bath work, homeowners often pair it with Walk-In Showers & Shower Remodeling in Irvine or a Tub-to-Shower Conversion in Irvine while the crew is already on site. We cover all of Irvine, including the 92623, 92710, 92606, and 92614 ZIP codes, and we can fold the cabinet and counter scope into a Kitchen Remodeling in Irvine project if you want the whole room done under one quote.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Irvine

Most full cabinet and countertop jobs in Irvine take two to four weeks, with the bulk of that being order and fabrication lead time rather than install days. Demo and cabinet set run three to six working days, countertops add about a week for template and fab, and backsplash and punch close it out. Call (888) 255-9354 for a timeline built around your actual cabinet line and slab choice.
Straight replacement of cabinets and countertops in the same footprint usually doesn’t require a permit, but moving plumbing, relocating a gas line, adding a circuit, or opening a wall to change the footprint does. Because much of Irvine is HOA-governed, exterior-related changes also go through village architectural review even when the city permit is simple. We map the scope against both at the estimate.
Yes, and that’s the most common Irvine cabinet and countertop scope we quote. Keeping the sink, range, and wall positions fixed means no plumbing permit and a faster schedule. The trade-off is that your new layout has to fit the existing footprint, which is usually solved with semi-custom cabinet widths rather than moving the plumbing.
Expect $14,000 to $45,000 for the combined job, with cabinet installation at $4,000 – $13,000 and countertops at $2,000 – $6,500 if quoted separately. Kitchen islands add $3,000 – $10,000 and backsplash adds $800 – $2,500. Call (888) 255-9354 for an exact quote, estimates are free.
Every cabinet and countertop job we run is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t done right, we make it right. Our technicians arrive background-checked and in uniform, and calls get answered by a live person 24/7.
Get a Free Cabinets & Countertops Estimate in Irvine
Call (888) 255-9354 to schedule a free on-site estimate for cabinets and countertops in Irvine. We measure the room, review the layout and cabinet line options with you, and hand you a written line-item quote with no surprises. Ask about the $1,000 off projects over $10,000 and 0% financing for 18 months while you’re on the phone, and we’ll tell you what the job looks like from template to final walkthrough. Live person, 24/7.
Written by the team at Groundwork Construction Co.












