







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Irvine: What It Costs and How Long It Takes
Backsplash, tile and flooring work in Irvine usually runs $14,000 – $45,000 for a full kitchen-plus-flooring scope, with a backsplash-only job landing around $800 – $2,500 and a single-room tile floor in the $4,000 – $9,000 range. Most kitchens take two to three weeks from demo to grout, and flooring adds three to seven days on top depending on square footage. Call (888) 255-9354 for a free on-site estimate and a written line-item quote.
How we run a tile and flooring job, stage by stage

Every Irvine backsplash, tile and flooring project follows the same order. The stages don’t move around, because tile laid before the substrate is right fails within a year.
Stage 1: Site walk and material takeoff (day 1)
We measure every plane that gets tile, check the subfloor for deflection, and confirm where outlets, plumbing stub-outs and appliance cutouts land. You leave this visit with a material list and a decision deadline, usually three to five days out, so the tile order and lead time line up with the start date.
Stage 2: Demo and substrate prep (days 2 – 4)
Old backsplash comes off, flooring comes up to the subfloor, and adhesive residue gets ground down. On a kitchen floor we check for soft spots and level the surface with self-leveling compound where needed. This is the stage where hidden problems surface: a rotten patch under the sink, a cracked slab, a floor that was never flat to begin with.
Stage 3: Layout and dry-fit (day 4 or 5)
Before a single tile is set, we lay out the pattern on the floor and mark the wall. You approve grout line width, pattern direction, and where the tile terminates at cabinet edges and doorways. Getting this wrong is the number one reason a finished job looks off, and it costs nothing to fix at this stage.
Stage 4: Setting tile (days 5 – 10)
Floor tile goes down first, then backsplash, so nothing gets walked on before it cures. Large-format tile needs a longer set and more careful leveling than a standard 3×6 subway. Mortar cure time before grout is typically 24 hours.
Stage 5: Grout, seal and final walk (days 10 – 14)
Grout goes in, gets sealed on natural stone, and we walk the job with you against the original quote. Anything on the punch list gets fixed before we call it done. Our 730-Day Done Right Promise covers workmanship for two full years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Material selection is where a tile job gets expensive or stays reasonable, and the honest trade-offs matter more than the catalog photos.
- Ceramic vs. porcelain floor tile: Ceramic runs lower per square foot and suits low-traffic rooms. Porcelain costs 20 – 40% more but handles moisture, pets and heavy foot traffic far better, which is why we steer Irvine kitchens and entryways toward it.
- Large-format vs. standard tile: 12×24 or 24×24 porcelain means fewer grout lines and a cleaner look, but it demands a flatter substrate and more cutting waste. Standard 12×12 is more forgiving and cheaper to install.
- Backsplash material: Subway tile is the value play; glass and marble mosaic push toward the top of the $800 – $2,500 band. Marble needs sealing every year or two. Glass doesn’t.
- Luxury vinyl plank vs. tile: If you want warmth underfoot and a faster install, LVP is a real contender. It won’t match tile’s durability in a wet kitchen, but it’s the right call for a rental or a fast flip.
- Grout and trim: Epoxy grout costs more upfront and resists staining and mold far better. Schluter-style metal trim finishes edges cleanly where tile meets drywall.
- Underlayment and membrane: A crack-isolation membrane over a slab adds cost but prevents hairline cracks from telegraphing through the tile.
What backsplash, tile and flooring costs in Irvine, CA

A full kitchen tile and flooring scope in Irvine lands between $14,000 and $45,000. Backsplash-only sits at $800 – $2,500, and a single-room tile floor typically runs $4,000 – $9,000. Five things push a job toward the low or high end:
- Square footage and layout complexity: A simple rectangular floor is the cheapest per square foot. Diagonal layouts, herringbone patterns and rooms with multiple jogs add labor and cutting waste.
- Existing condition: A flat, sound subfloor means a straightforward install. A slab that needs leveling, or a floor with water damage under it, adds prep cost and days.
- Relocating plumbing or electrical: Moving an outlet or a plumbing stub-out in the backsplash wall means opening drywall, patching, and sometimes a permit. Keeping fixtures where they are keeps the number down.
- Material grade: Ceramic vs. porcelain, standard vs. large-format, mosaic vs. slab. The material itself can be a third of the total on a premium job.
- Permit scope: Cosmetic tile work usually doesn’t require a permit. Anything that touches plumbing, electrical or structural framing does, and that adds inspection time to the schedule.
Every written estimate we hand over lists tile, thinset, grout, trim, membrane, labor, haul-away and permit fees line by line. The number you see is the number you pay. We don’t hand over an estimate that leaves out substrate prep and then bill it later as a change order.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine homes specifically do to this job
Irvine is almost entirely master-planned tract and village housing built from the 1970s onward, and that shapes this work more than people expect. The tile and flooring in Woodbridge and Northwood condos often sits over a framed subfloor shared with a neighbor, which changes how sound and crack isolation have to be handled. In Turtle Rock, attached townhomes mean demolition noise and dust control run into shared walls and HOA rules on work hours. Village associations in ZIP codes 92606, 92614 and 92623 frequently require an architectural submittal before exterior-visible work begins, and anything touching the kitchen wall or plumbing runs into Irvine’s permitting and inspection process. We see two common failure modes: builder-grade mastic under a 1990s backsplash that releases after 25 years, and grout that was never sealed in a kitchen that gets daily use. Neither is an emergency, but both are worth fixing before they turn into a full tear-out.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked questions about backsplash, tile and flooring in Irvine

A kitchen backsplash alone takes two to three days. Adding a full kitchen floor and a bathroom tile floor extends the project to two or three weeks depending on square footage and substrate condition. Call (888) 255-9354 for a schedule based on your actual scope.
Cosmetic tile and flooring replacement usually doesn’t require a permit, but anything that relocates plumbing or electrical does. Irvine’s permit and inspection process applies to that work, and we handle the submittal and schedule the inspection if the scope calls for it. Call us to confirm what your job needs.
Yes. Keeping fixtures and outlets where they are keeps the job fast and the cost down. If you want to relocate anything, we open the wall, patch it and coordinate the trade work, which adds days and cost. Call (888) 255-9354 and we’ll tell you which path fits your kitchen.
A full kitchen and flooring scope typically runs $14,000 – $45,000, backsplash-only is $800 – $2,500, and a single-room tile floor is roughly $4,000 – $9,000. Material grade, substrate condition and layout complexity move the number most. Call (888) 255-9354 for an exact quote – estimates are free.
Every tile and flooring project is covered by our 730-Day Done Right Promise, which runs two full years on workmanship. If something isn’t right, we come back and fix it. Call (888) 255-9354 to schedule your free estimate and walk through the warranty in person.
Get a free backsplash, tile and flooring estimate in Irvine
Call (888) 255-9354 to book a free on-site estimate and design consult for backsplash, tile and flooring in Irvine. A live person answers around the clock, and we’ll walk the space, measure, and hand you a written line-item quote with no-hassle upfront pricing. If it’s part of a bigger job, we can scope the Kitchen Remodeling in Irvine alongside it, and homeowners often pair this work with a Tub-to-Shower Conversion in Irvine or Vanities, Tile & Fixtures in Irvine. You can also see our full Kitchen Remodeling service or check our Irvine service area page. Projects over $10,000 get $1,000 off, with 0% financing for 18 months available.
Written by the team at Groundwork Construction Co.












