







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Irvine, CA: What It Costs and How It Gets Built
A wood fence in Irvine, CA usually runs $3,500 to $9,000, with most village lots landing around $4,800 to $6,500 for a standard side-and-back privacy run. Plan on two to three days on site: footings and posts on day one, rails and pickets on day two, gates and cleanup on day three. Call (888) 255-9354 and we’ll walk your property line, check the HOA’s approved styles, and put a fixed number in writing before anyone digs.
From Layout to Latch: How a Wood Fence Goes Up in Irvine

The order of operations matters more on a fence than people expect. Skip a step and you’ll be resetting posts in two years. Here’s what actually happens.
Stage 1 – Property line and utility check
Before we quote, we pull up your plat or survey and confirm the line with you, then call 811 for utility marking. Fences have hit irrigation lines and low-voltage landscape wire on plenty of Irvine jobs. You decide the exact run at this stage, including gate placement and whether a shared fence line gets split with a neighbor. Usually takes one to three days to schedule the marks.
Stage 2 – HOA submittal
This is the step that trips people up in Irvine. Most village associations have an approved fence style, height limit, and stain color, and a submittal has to clear architectural review before work starts. We photograph your property, put together the style and elevation details the association asks for, and you sign it. Review often runs two to four weeks, so it drives the whole schedule. Start here or you’ll be waiting on a fence you’ve already paid a deposit on.
Stage 3 – Demo and footing day
We remove the old panels (or mark the new line if there’s nothing there), dig post holes to depth, set posts in concrete, and leave them to cure overnight. Posts are set below the frost-free depth used in Southern California and belled at the base so wind doesn’t work them loose. This is the noisy day. You’ll want vehicles moved off the driveway and pets inside.
Stage 4 – Framing and picketing
Stringers go on, then pickets, then the cap rail if you chose one. With a two-person crew, roughly 100 to 150 linear feet of standard dog-ear picket goes up in a day. You pick the picket spacing and whether you’re doing board-on-board or side-by-side at this point, and we’ll show you the difference on the first panel before committing the whole run.
Stage 5 – Gates, hardware, and walk
Gates get hung, hinges and latches set, and the whole line gets eyeballed for plumb and height. Final walkthrough takes about 20 minutes. You get the stain schedule and the warranty paperwork, and we’re gone. Two to three days on site is normal for a typical Irvine backyard run, one day of that is cure time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Wood Fence
- Western red cedar vs. pine vs. redwood. Cedar is the sweet spot for Irvine: naturally rot-resistant, takes stain evenly, and holds up against the dry Santa Ana wind cycles. Pine costs less up front but wants restaining sooner. Redwood is the premium pick and looks superb, though it costs meaningfully more per linear foot.
- Dog-ear vs. flat-top pickets. Dog-ear is the common village-approved profile and reads as a clean privacy fence. Flat-top gives a more modern line. Check which one your association actually allows before you fall in love with a look.
- Board-on-board vs. side-by-side. Board-on-board overlaps pickets for full privacy with no see-through gaps, at a higher material cost. Side-by-side is the standard and cheaper, with tiny gaps you’ll notice up close.
- Post material and setting. Pressure-treated posts set in concrete are the durable standard. Steel posts with wood veneer cost more but resist ground contact rot well. This is the single biggest predictor of how long your fence lasts.
- Height. Six feet is the usual privacy height and what most Irvine associations approve. Five feet clears the line without a hassle, and anything over six feet typically needs a variance.
- Finish. A penetrating stain at install adds years. Clear sealant lets cedar gray out naturally. You pick the tone, and your HOA often has the final word on it.
What a Wood Fence Costs in Irvine, CA

Most wood fence projects in Irvine land between $3,500 and $9,000. That spread comes down to five things.
- Linear footage. A typical village backyard run is 100 to 180 feet. Every extra 20 feet adds roughly $400 to $800 depending on material.
- Material grade. Cedar sits mid-range, pine runs lower, redwood pushes toward the top of the range.
- Existing fence condition and removal. Tearing out and hauling an old fence runs $300 to $900 depending on length and how much concrete is in the ground.
- Gates. A standard walk gate is included in most quotes. A wider double gate or a driveway gate adds cost for framing and hardware.
- Grade, slope, and access. Yards on a slope, or ones where the crew has to haul material through the house, cost more in labor.
A written estimate covers post setting in concrete, framing, pickets, hardware, cleanup, and haul-away. It typically doesn’t cover HOA submittal fees, a survey if one is needed, or stain if you add it later. If your fence ties into a patio or hardscape project, homeowners often pair this with Paver Driveways in Irvine or a fresh Concrete Driveways & Concrete Work in Irvine to handle access and grading in one pass. Every job we quote carries our 730-Day Done Right Promise and upfront pricing, so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to a Wood Fence Job
Nearly all of Irvine is master-planned tract and village housing, which means two things for your fence. First, HOA architectural review is part of the job, not an optional add-on. Villages like Woodbridge, Northwood, and Turtle Rock each have their own approved fence styles, and the association’s guidelines stack on top of the city permit. We write the submittal to match so you’re not resubmitting. Second, the lots are tight and the yards are usually walled or fenced on three sides already, so access and haul-away planning matter.
The other Irvine factor is climate. The semi-arid coastal weather here is easy on wood, but the dry Santa Ana wind events are not. High wind load is why we oversize posts and set them deep. On homes near the open-space edges at Turtle Rock, Quail Hill, and Orchard Hills, we’re also mindful of defensible-space zones and prefer non-combustible hardscape in the first few feet where it’s allowed. The city’s parcel stock covers ZIPs 92602, 92617, 92619, and 92604, and if your street falls outside those, our Irvine service-area page has the full details on where we work.
One last thing. Irvine fences fail mostly on the gate side, not the panel side. Sagging hinges come from undersized posts, and dry-season wood shrinkage opens up picket gaps by month three. Setting posts deep and tightening hardware after the first wet season handles both.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Wood Fence in Irvine

On site, a typical Irvine wood fence takes two to three days, with one day of that as concrete cure time. The real timeline is the HOA submittal, which often runs two to four weeks. Call (888) 255-9354 for an exact schedule based on your property.
Yes, most wood fences in Irvine need both a city permit and approval from your village association. The HOA sets the style, height, and stain tone, and the city checks the height and setback against code. We prepare the submittal and pull the permit as part of the job so nothing holds up your install. Call (888) 255-9354 to get the review started.
Most wood fence projects in Irvine cost $3,500 to $9,000, with the typical village backyard landing around $4,800 to $6,500. Length, material grade, gate count, and slope are the biggest price drivers. Call (888) 255-9354 for a fixed written quote. Estimates are free.
Usually, yes. We call for utility marking before we dig and hand-dig around any buried line, so a fence can go up without moving plumbing, electrical, or irrigation. If the run crosses a gas line or a drain field, we’ll flag it on the estimate before work starts. Call (888) 255-9354 and we’ll set up a site walk.
Every wood fence we build is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship, from post setting to gate hardware, and includes one follow-up tightening visit after the first wet season. Calls are answered by a live person around the clock, so getting us back out is never a runaround. Call (888) 255-9354 with any question.
Get a Wood Fence Estimate in Irvine
If you’re ready to put a real number next to your project, call (888) 255-9354 for a free on-site estimate. We’ll walk the property line with you, confirm the HOA’s approved style, and hand you a fixed written quote with no surprises. Wood fence is one part of what we do in Irvine, and if your project grows into something bigger, it’s all part of our Fence Installation in Irvine scope or our wider Fence Installation services. Live person, 24/7. No voicemail.
Written by the team at Groundwork Construction Co.












