







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Anaheim, CA: What It Costs and How Fast It Goes Up
A wood fence in Anaheim, CA typically runs $3,500 to $9,000 for a standard residential run, and most jobs go from tear-out to final walkthrough in two to four working days. That range covers posts set in concrete, cedar or pressure-treated boards, a gate, and haul-away of the old fence. Exact cost depends on linear feet, height, board grade, and whether your property line runs along a slope. Call (888) 255-9354 for a free on-site estimate.
Here’s what actually drives the number, and what we see in Anaheim yards that other cities’ fence pages won’t tell you.
How a Wood Fence Gets Built: Stage by Stage

We don’t start swinging hammers on day one. A fence that fails in three years usually failed at layout, not at the boards. Here’s the real sequence.
Stage 1 – Site walk and line check (day 1, about an hour). We walk the property line with you, confirm where the fence sits relative to your plat or survey, and check what’s underground along that line: irrigation runs, gas stub, low-voltage landscape lighting, the sewer lateral. On older properties near the Colony District, this is where a 1920s clay sewer line or a forgotten sprinkler zone turns up. You decide the exact fence line before anyone digs a hole.
Stage 2 – Demo and haul-away (day 1, half a day). Out comes the old fence, posts included. Posts set in concrete get pulled whole, not snapped off at grade, because a broken post stub in the ground becomes your new fence’s problem. We haul everything off-site the same day. If a neighbor’s fence shares the line, this is the stage where that gets sorted out, so have that conversation before we arrive.
Stage 3 – Layout, digging, and setting posts (day 1 into day 2). Posts go in at 6 to 8 foot spacing depending on panel design, set in concrete and plumbed with a level. Post depth matters more in Anaheim than in most of the country: our soil is often sandy loam over clay, and a fence post that’s only 18 inches deep will lean after two or three Santa Ana wind seasons. We set to depth and let the concrete cure overnight. You decide here: post material (pressure-treated or cedar), post spacing, and gate locations.
Stage 4 – Rails, boards, and gate hang (day 2 into day 3). Top and bottom rails go on, then boards, then the gate gets hung and adjusted. Gates are the part that fails first, so we hang them with a proper frame and diagonal brace and set the latch and self-close hardware with the swing direction you want. For a 150-foot residential run, this is typically a full day.
Stage 5 – Final walkthrough and punch (day 3 or 4). We walk the whole run with you: board alignment at the top, gate swing, post caps if you chose them, and cleanup. Anything that needs a tweak gets fixed before we leave. This is also when we hand over the written workmanship coverage, which is the 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Fence grade is where budgets get made or blown. These are the real choices on a residential job, with the honest trade-off on each.
- Cedar vs. pressure-treated pine. Cedar boards resist rot and insects without chemical treatment, hold stain beautifully, and cost more. Pressure-treated pine is the workhorse: cheaper, takes paint and stain well, but will check and gray faster and needs re-sealing more often. Cedar suits a visible front-yard fence; treated pine suits a long side-yard run on a budget.
- Board thickness and grade. A 5/8-inch dog-ear picket and a full 1-inch dog-ear board look similar from the street and behave very differently in a wind. Thicker boards cup less and hold fasteners better. This is the single biggest variable in how a fence looks at year seven.
- Board-on-board vs. tight board. Board-on-board overlaps boards for full privacy with no see-through gaps, and it costs more in material and labor. Tight board is cheaper and fine if privacy isn’t the goal.
- Dog-ear vs. flat-top vs. French Gothic tops. Dog-ear and flat-top are the two most common. The top profile is a curb-appeal choice; it doesn’t change the structure.
- Post caps and trim. Flat caps protect the post end-grain from water and Anaheim’s dry-season sun. Worth the small cost on cedar; optional on treated pine.
- Gate hardware. A standard latch and hinge set is fine. If you have kids or a pool, self-closing, self-latching hardware is the right call and costs more up front.
If your project also involves replacing a gate area that’s tied to a shed or outbuilding, we can coordinate that with the same crew. The same goes for a front-yard fence integrated into a fence installation service scope as part of a larger property project.
What Wood Fence Costs in Anaheim, CA

Most Anaheim residential wood fence jobs land between $3,500 and $9,000, installed. Here’s what pushes a job toward the low end versus the high end.
| Configurations | Typical Range |
|---|---|
| Basic treated pine, ~80 ft, tight board, standard gate | $3,500 – $4,500 |
| Cedar, ~100 ft, dog-ear, one gate | $5,500 – $7,000 |
| Cedar, 150+ ft, board-on-board, two gates | $7,500 – $9,000 |
The four variables that move the number:
- Linear footage. The most direct driver. Standard residential runs run 80 to 150 feet, and every 10 feet adds cost in both material and labor.
- Height. A 6-foot fence is the standard; a 5-foot or 4-foot fence costs less in material and labor. Beyond 6 feet in Anaheim, expect a conversation about wind load and post depth before anyone quotes it.
- Existing condition. Old posts set in concrete with concrete footings that need breaking out and hauling add real labor. An easy demo is fast; a 30-year-old fence with root-bound posts is not.
- Gate count and hardware. Each gate adds framing, bracing, and hardware, and a double gate or self-closing hardware adds more.
The estimate we write is line-item and covers demo, haul-away, materials, posts, gate hardware, and cleanup. It typically doesn’t cover hauling off a neighbor’s fence if you’re only replacing your side, or repairing an existing retaining wall along the fence line – those get quoted separately once we’ve seen them. What you get is upfront pricing with no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Anaheim Homes Do to This Job
Fence work here splits into two different realities. On the older grid near downtown and the historic Colony District in 92805, we’re often matching a new fence to a 1920s house where the fence line is tight against the alley, the neighbor’s property line is ambiguous, and the soil is loaded with old footing debris. Posts need careful placement and the layout gets documented before anyone digs. Up in 92806 and 92807, most of what we replace is builder-grade 1960s-70s tract fencing: original post-and-rail, treated pine that’s grayed and checked, and gates that have sagged for a decade. Most of those are straightforward swaps.
Then there’s the wind. Anaheim’s semi-arid climate and long hot summers are the obvious part, but it’s the Santa Ana wind events out of the canyons that reveal whether a fence was built right. In Anaheim Hills (92807/92808), those wind events pair with slope, so a fence line running along a hillside needs deeper posts, and brush clearance along the property line matters for wildfire-hardening. We see the failure pattern every year: a fence that was fine for three seasons comes through one Santa Ana event with a leaning run and two broken gates, because the original install used shallow posts and no bracing. If your fence is on a slope, say so on the call. It changes the estimate.
Permits are a real question in Anaheim, not a formality. Fence height, setbacks, and corner-lot visibility rules vary by zone, and the Anaheim building division wants a submittal for anything that goes beyond a standard residential height. We pull the permit and clear inspection as part of the job. If the fence is part of a full Fence Installation in Anaheim project across a larger property, we scope it in from the start. Homeowners planning a bigger outdoor build often pair this with Paver Driveways in Anaheim or with Concrete Driveways & Concrete Work in Anaheim, and we can schedule them together. We cover all of Anaheim, and we coordinate through Anaheim’s own building division rather than the county, which saves weeks on the permit timeline.
Serving Anaheim, CA – Our Local Coverage Area
We serve Anaheim and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in Anaheim

Most residential wood fence jobs in Anaheim take two to four working days from tear-out to final walkthrough. A standard 100-foot run with one gate is typically three days: demo and posts on day one, rails and boards on day two, gate and final walk on day three. An Anaheim Hills job on a slope with deeper posts runs to the fourth day. Call (888) 255-9354 for a timeline specific to your yard; estimates are free.
Often yes, depending on height and your specific zone. Standard residential fence heights usually fall within an exemption, but anything taller, on a corner lot, or near a setback line needs a submitted permit through the Anaheim building division. We confirm the requirement for your address during the estimate, and we pull the permit and clear the inspection as part of the job. Call us to check your specific property.
Rarely, if we check first. Before anyone digs, we locate irrigation runs, gas stubs, and low-voltage lines along the fence line, and we adjust post placement to avoid them. Older homes near the Colony District can have a sewer lateral or old footing debris in the way; those are the cases where we shift a post or flag a repair before we cut. Landscaping within a foot of the line gets protected or temporarily moved.
Most Anaheim residential wood fence jobs run $3,500 to $9,000 installed, including demo, haul-away, posts set in concrete, boards, a standard gate, and cleanup. Cedar, board-on-board, additional gates, and steep-slope post depth move you toward the higher end. Our estimates are line-item, so you see exactly what’s included. Call (888) 255-9354 for an exact quote; estimates are free.
Every wood fence we build carries the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship – post alignment, gate function, board fastening, and cleanup – for two years from completion. Material defects are covered by the manufacturer. Our technicians are background-checked and arrive in uniform, and every job starts with an upfront written estimate.
Get a Free Wood Fence Estimate in Anaheim
Call (888) 255-9354 and we’ll schedule a free on-site estimate for your wood fence in Anaheim. A live person answers any hour of the day or night, so you’re never routed to voicemail. We walk the line with you, measure the run, check the grade, and hand you a written line-item quote with the 730-Day Done Right Promise behind it.
Written by the team at Groundwork Construction Co.












