







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Aliso Viejo, CA
Walk-in showers & shower remodeling in Aliso Viejo typically runs $9,000 – $28,000 for a full master bath scope, with a standalone walk-in shower install falling in the $4,500 – $12,000 range. The work itself takes 2 – 4 weeks from demo to final glass, and the biggest variable is what’s behind the wall when the old pan comes out. Call (888) 255-9354 for a free on-site estimate and a written, line-item quote before anything gets touched.
How our walk-in shower process runs, stage by stage

Most contractors sell you a shower. We sequence a job. Here’s what actually happens when we open up a 1990s Aliso Viejo bathroom and rebuild it as a curbless or low-curb walk-in.
Stage 1: Site check and rough measurements (day 1, 2 – 3 hours)
We measure the existing footprint, confirm the drain location and slope, and check what the slab or subfloor is doing under the old pan. In Aliso Viejo, that last part matters: post-tension slabs show up on some canyon-adjacent lots, and you can’t drill or cut a tensioned cable. We also photograph everything for the permit file. Your decision at this stage is simple – pick linear drain versus center drain, because it changes the floor slope and the tile layout.
Stage 2: Demo and inspection (days 2 – 4)
Old tile, pan, and backer board come out. We check for the two failures we see most in homes built around here: failed hot-mop pans under original builder-grade tile, and moisture creeping into the drywall behind the shower because there was no proper waterproofing membrane. If we find rot or a compromised valve, that’s a change we flag before we proceed, not after. Your call here is whether the valve gets replaced while the wall is open, which is the cheapest moment it will ever be.
Stage 3: Rough-in and waterproofing (days 4 – 7)
Plumbing is adjusted for the new drain position and any relocated valve. We build the pan with pre-sloped mortar and a bonded waterproofing membrane, then flood-test it for 24 hours. This is the stage people can’t see and the one that decides whether the shower is still dry at year 12. If you’ve chosen a bench, niche, or half-wall, framing happens now.
Stage 4: Tile, glass, and trim (days 7 – 14)
Wall and floor tile go in, then grout and sealant cure before glass templating. Frameless glass is measured after tile is final, so expect a few days between tile and glass install while the panel is cut. That gap surprises homeowners who expected a one-week job.
Stage 5: Final walkthrough and punch list (day 14 – 20)
We test the drain, check the door sweep and seal, and walk the job with you. Everything we install is covered by the 730-Day Done Right Promise. If something isn’t right, we come back and fix it – that’s the whole point of the guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
These are the real forks in the road on a walk-in shower. Each has a trade-off, and none of them is universally right.
- Curbless vs. low-curb: A true curbless shower means recessing the slab or building a slight slope into the floor – more demolition, more cost, better accessibility. A low 2-inch curb keeps the price down and installs faster, but it’s not barrier-free.
- Tile material: Porcelain is the workhorse – dense, easy to clean, and forgiving of the hard water we get here. Natural stone (marble, travertine) looks richer but needs sealing and shows soap scum faster. Large-format slabs mean fewer grout lines; mosaics handle the shower floor slope better.
- Waterproofing system: A bonded sheet membrane or a liquid-applied system both work if installed correctly. The failure isn’t the product – it’s the installer skipping the flood test or the pre-slope.
- Drain type: Linear drains drain faster and look cleaner but cost more and require precise slope work. A center drain is cheaper and easier to service.
- Glass: Frameless glass in 3/8-inch tempered is the standard for a clean look. A semi-frameless or framed enclosure saves money and holds up better in a busy household.
- Fixtures: Kohler and similar brands offer consistent finishes across the shower valve and trim. Mixing brands is where people end up with a discontinued cartridge in five years.
What Walk-In Showers & Shower Remodeling costs in Aliso Viejo, CA

A full walk-in shower build in Aliso Viejo lands between $9,000 and $28,000, and a focused shower replacement runs $3,000 – $8,500. Here’s where the money actually goes:
| Line item | Typical range |
|---|---|
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement (like-for-like) | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Full bathroom remodel (surrounding scope) | $9,000 – $28,000 |
What pushes a job toward the high end? Size, existing condition, plumbing relocation, and material grade. A larger footprint means more tile, more waterproofing, and more glass. If the original drain was hot-mopped and leaking into the subfloor, we’re looking at rot repair and a new pan – real cost. Moving a drain or relocating a valve to the other wall means opening the plumbing wall. If you want the structure changed – a bench, a half-wall, a window sealed up – that’s framing and drywall, and it adds time. And marble means more labor and more material cost than porcelain from the start.
What’s in a written estimate: demo, haul-away, rough plumbing, waterproofing and flood test, tile, grout, sealant, glass, and permit fees we pull on your behalf. What’s typically not: structural changes discovered after demo, tensioned-cable conflicts on a post-tension slab, or fixtures you source yourself. We put it all in writing before work starts, so the number you see is the number you pay. Call (888) 255-9354 for a line-item quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Aliso Viejo homes specifically do to this job
Aliso Viejo was built almost entirely in the 1990s, which means nearly every bathroom we open here is 25 – 30 years old and running on the original builder-grade pan, valve, and tile. That’s the single biggest driver of scope. A 1993 vintage shower almost never has a modern waterproofing membrane behind it – it’s often a hot-mop pan with drywall at the edges. When we open those up in neighborhoods off Aliso Creek Road and Pacific Park Drive, we frequently find failed pans and soft backer board that the homeowner couldn’t see. The other local reality: this is a master-planned city with strict HOA and architectural review guidelines, so any change that touches the exterior – a shower window replacement, a vent change – goes through the design review committee, and we plan the timeline around that. Homes near Aliso and Wood Canyons sit in a wildfire risk zone, which means fire-resistant materials on the exterior and careful compliance when a shower wall touches an exterior wall. The Mediterranean-style tract homes and townhomes here mostly have stucco and concrete tile roofs – and if your shower remodel is part of a larger project, homeowners often pair it with Bathroom Remodeling in Aliso Viejo to handle the surrounding vanity and flooring in one pass.
Serving Aliso Viejo, CA – Our Local Coverage Area
We serve Aliso Viejo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Walk-In Showers & Shower Remodeling in Aliso Viejo

Most walk-in shower remodels in Aliso Viejo take 2 – 4 weeks from demo to final glass, with the gap between tile install and glass templating accounting for 3 – 7 days of the total. Permit approval adds 1 – 2 weeks depending on the scope and HOA review. Call (888) 255-9354 for a schedule estimate specific to your bathroom.
Yes – any shower remodel that touches plumbing, the drain, or the waterproofing pan generally requires a permit and a plumbing inspection. In Aliso Viejo’s master-planned neighborhoods, HOA architectural review may also apply if the work touches an exterior wall or window. We pull the permit and manage the inspection as part of the job.
In most cases, yes. A walk-in shower replacement can stay right where the old one is, reusing the existing drain and valve locations, which keeps the cost closer to the $3,000 – $8,500 range. Relocating the drain or valve means opening the plumbing wall and lifts the price into the $9,000 – $28,000 full-scope band. We’ll tell you which situation you’re in after the site check.
A standalone walk-in shower install in Aliso Viejo runs $4,500 – $12,000, and a full bathroom remodel that includes the shower lands at $9,000 – $28,000. Material grade, drain type, and whether we’re repairing a failed pan drive the final number. Call (888) 255-9354 for an exact quote – estimates are free.
Every walk-in shower we install is backed by our 730-Day Done Right Promise. If the waterproofing, tile, or glass isn’t holding up the way it should, we come back and make it right. The number you see on the written estimate is the number you pay, with no change orders once work starts.
Get a free walk-in shower estimate in Aliso Viejo
We’ll come to your home, measure the shower, check the pan and drain, and hand you a written, line-item estimate for Walk-In Showers & Shower Remodeling in Aliso Viejo – no cost, no pressure. A live person answers our line 24/7, so call (888) 255-9354 whenever it’s convenient, or call to schedule your free on-site estimate. We’ll walk the bathroom with you and tell you straight what the job needs.
Written by the team at Groundwork Construction Co.












