







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in San Juan Capistrano, CA: What the Job Actually Involves
Custom & geometric windows in San Juan Capistrano typically run $8,000 – $25,000 installed, and most whole-house packages take three to six weeks from template to final trim. The job pairs a made-to-measure window package (arches, rounds, trapezoids, eyebrow shapes, or matched groupings of rectangular units) with the framing, waterproofing, and finish carpentry that a standard replacement window can’t handle. Call (888) 255-9354 and we’ll walk your openings, confirm which shapes are inside your budget, and put the number in writing.
How Custom & Geometric Windows Get Built, Stage by Stage

Geometric work fails on geometry far more often than on glass. The process is built to catch that before anything is cut.
Day 1: Field measurement and template
We measure every opening in person, not from a photo or a builder’s drawing. Arched and radius windows get a physical template traced on site, because an existing arch is almost never the perfect radius the original plans show. You decide at this point which openings get a shape change and which stay as-is. Template day runs two to four hours for a typical set of six to ten openings.
Week 1 – 2: Ordering, lead time, and design sign-off
Custom shapes are built to order, and lead time is the single biggest schedule variable on the job. Standard rectangular units in a made-to-measure size move faster; true radius and elliptical units, or anything with a divided lite pattern you specify, take longer. You’ll sign off on a drawing of each window, the muntin layout, and the finish before the order goes in. Nothing gets fabricated until that sign-off is in hand.
Week 2 – 4: Framing, preparation, and inspection
If a window is replacing an existing one at the same size and shape, prep is straightforward: remove the old unit, inspect the rough opening for rot or water damage, and square it up. If you’re adding a new shape or enlarging an opening, the framing changes, and that’s where a structural review comes in. Headers, cripple studs, and any wall penetration get built and inspected before the new units go in. This stage is where we find the surprises – rotted sheathing behind a 40-year-old window is common out here.
Install days: Setting, flashing, and sealing
The units get set, shimmed, and anchored per the manufacturer’s instructions, then flashed and sealed at the perimeter. Water intrusion at the head and sill is the failure mode that ruins a beautiful window package, so we spend real time here. A standard six-window install sets in one long day; a large arched assembly with sidelites may take two.
Finish: Trim, stucco or siding repair, and final walkthrough
Interior trim, exterior stucco patching or siding tie-in, paint touch-up, and a final operating check on every sash. You walk each window with us before we pack up. Most jobs land completed in a single visit once the materials are on site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on Custom & Geometric Windows
Every buyer picks through the same handful of forks. Here’s what each one does to the number and to how long the windows last.
- Frame material – vinyl vs. fiberglass vs. wood-clad. Vinyl is the most cost-effective and holds up well in a semi-arid climate, but very large radius units can flex, so it’s often limited on the biggest shapes. Fiberglass is dimensionally stable and takes a wider range of custom shapes; it costs more. Wood-clad (Andersen and Marvin lines are what most of our buyers compare) looks the part on Spanish Colonial Revivals and Craftsman homes and can match existing millwork, but it’s the top of the range and wants repainting or refinishing over time.
- Glass package. Standard dual-pane is fine. Low-E and impact-rated laminated glass add cost but matter on west-facing walls and for anything in a historic corridor where security and heat gain both come up.
- Shape complexity. A simple half-round and a segmented arch that mimics a true curve are priced differently. True radius costs more than approximate; the closer you push a manufactured shape to an exact historic profile, the more the per-unit price climbs.
- Divided lites and trim. Grilles, muntin patterns, and custom interior casing range from off-the-shelf profiles to hand-matched millwork for a historic home. Hand-matching clay tile sills and adobe-era trim profiles is a real cost line in the historic core.
- Exterior cladding tie-in. James Hardie fiber cement and stucco are the two exteriors we tie into most; each needs a different flashing detail at the window perimeter.
What Custom & Geometric Windows Cost in San Juan Capistrano, CA

A single custom shape, installed, usually lands in the $1,800 – $4,000 range once you account for fabrication and the framing work around it. A full package of six to ten custom and geometric units with a mix of shapes generally runs $8,000 – $25,000 installed.
Five things push a job toward the top of that range:
- Number and complexity of shapes. True radius and elliptical units cost more than rectangular made-to-measure units.
- Rough opening condition. Rot, old termite damage, or a badly out-of-square opening means framing repair before the window goes in.
- Structural changes. Enlarging an opening or adding a new one means a header and a structural review.
- Material grade. Vinyl sits at the low end; wood-clad with a custom finish sits at the high end.
- Historic and design review. In the historic downtown and Mission corridors, window changes visible from the street may require Cultural Heritage Commission review and historic-resource documentation, which adds time and archival work.
A written estimate from us is line-item and fixed up front. The number you see is the number you pay. What typically isn’t in the base number: structural engineering if a wall opening changes, and any surprise rot found after demo. We flag both before work starts, not mid-job. All of this is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat San Juan Capistrano Homes Do to a Window Job
San Juan Capistrano is one of Orange County’s oldest continuously inhabited towns, and that history lands directly on custom window work. In the historic core around Mission San Juan Capistrano and the adobe structures nearby, any exterior alteration visible from the street can trigger Cultural Heritage Commission review and historic-resource documentation. That means a window that would be a simple swap in a master-planned neighborhood becomes a documented design-review process. Contractors who work adobe have to match traditional earthen materials and methods, which is a different discipline than standard tract-home work.
The housing stock here spans genuine 18th- and 19th-century adobe and Mission-era buildings, early-20th-century Craftsman and Spanish Colonial Revival homes downtown, mid-century ranch homes on the outskirts, and newer communities like San Juan Hills. The semi-arid, marine-influenced climate – hot dry summers, mild wet winters – drives a lot of what we see: UV degradation on exterior finishes, seasonal clay-tile and stucco cracking from thermal cycling, and winter rain finding its way in through aged window perimeters and adobe walls. Hand-matching a clay tile sill or an aged stucco reveal is common here. We handle San Juan Capistrano and the surrounding ZIPs 92675 and 92693, along with Laguna Niguel, Ladera Ranch, Laguna Hills, and Laguna Beach.
Homeowners here often pair a window project with Concrete Driveways & Concrete Work in San Juan Capistrano or Asphalt Driveways & Resurfacing in San Juan Capistrano when they’re reworking the front of the house. When the scope widens to full replacement across the home, see our Windows & Doors in San Juan Capistrano page.
Serving San Juan Capistrano, CA – Our Local Coverage Area
We serve San Juan Capistrano and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in San Juan Capistrano

Plan on three to six weeks total, most of which is fabrication lead time. Templating and sign-off take a few days; custom shapes are built to order, then install is typically one to two days on site. Call (888) 255-9354 for a schedule estimate specific to your openings.
Yes, in most cases – new openings, size changes, and anything visible from the street in the historic core will require permits and may trigger Cultural Heritage Commission review. Same-size replacement is typically simpler. We pull and manage the permits and inspections for you. Call (888) 255-9354 and we’ll confirm what applies to your address.
Yes, if the new window goes into the same rough opening at the same size. Adding a shape, enlarging an opening, or changing a wall means framing – and possibly structural review – which adds cost and time. We confirm during templating exactly which openings stay simple and which need framing work.
A single custom shape installed runs roughly $1,800 – $4,000, and a whole package of six to ten units with mixed shapes generally lands between $8,000 and $25,000 installed. Material, shape complexity, and any framing or historic-review work move the number. Call (888) 255-9354 for a written line-item quote – estimates are free.
Every installation is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s on top of the manufacturer’s window warranty. Call (888) 255-9354 to go over the coverage in plain terms before you sign anything.
Get a Free Custom & Geometric Windows Estimate in San Juan Capistrano
We’ll come out, measure every opening, trace templates for your arches and rounds, and hand you a line-item written estimate with a fixed number, no change-order surprises, and 0% financing for 18 months plus $1,000 off projects over $10,000. Call (888) 255-9354 – a live person answers around the clock. We’ll confirm a time, walk you through what your San Juan Capistrano home needs, and put the numbers in writing.
Written by the team at Groundwork Construction Co.












