A Groundwork company - serving Yorba Linda, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Yorba Linda

Schluter Roofing in Yorba Linda, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Yorba Linda
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A new front yard fence with a matching gate
A new paver pool deck
An open kitchen and dining area after a remodel
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Roofing: The Yorba Linda Owner’s Guide

If you have Schluter roofing components on your Yorba Linda home and something has failed, the repair is usually straightforward: a trained installer replaces the failed profile, drain, or membrane section and ties it back into the existing assembly, typically within our roofing repair range of $400 – $1,800 for the repair itself. We’re an independent service provider, not affiliated with Schluter, and we handle the diagnostics, the correct part matching, and the installation. Most owners discover the problem the same way: a stain spreading across a ceiling in a hallway, water pooling at a balcony drain flange instead of draining, or a soft, spongy feel along a linear drain edge after a winter storm.

Call (888) 255-9354

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter’s roofing and waterproofing line covers several categories, and identifying the right part starts with the label or stamped marking on the component itself. The most common profiles you’ll run into on Yorba Linda homes are Schluter-KERDI waterproofing membrane and bonding flange drains, KERDI-LINE linear drains, KERDI-BOARD building panels, and the DITRA line where it’s used in adjoining deck or balcony assemblies. Each has size and series variants, so the flange diameter on a KERDI-DRAIN and the bonding flange on a KERDI-LINE are not interchangeable, and the drain grate width determines which linear drain body actually fits.

For the OEM-versus-aftermarket call: Schluter-manufactured parts are the only ones that carry a compatible warranty as part of the system, and third-party “equivalent” membranes and drains regularly fail at the bonding interface because the fleece and mortar chemistry don’t match. When the part is in a hidden waterproofing assembly, we use the OEM part. Where the piece is cosmetic (a stainless grate, for example), a quality aftermarket option can save money without affecting performance. The measurement that matters most: get the drain flange outside diameter and the grate length in inches, and check the printed series name and part number against Schluter’s current catalog before ordering.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Roofing Is Failing

  • Water staining on ceilings or soffits below a waterproofed deck or balcony. This usually means the KERDI membrane has failed at a seam, a fastener penetration, or the drain bonding flange connection, allowing water past the waterproofing layer.
  • Ponding water around a linear drain or bonding flange. If water sits instead of draining, the slope under the drain assembly has shifted or the flange isn’t bonded flush, which is a common issue after thermal cycling.
  • Loose or lifting membrane edges at perimeter terminations. Adhesive failure at the termination strip lets water wick underneath, and in Yorba Linda’s hot, dry summers followed by wet winters, that bond can degrade faster than expected.
  • Visible cracking or separation at drain flanges and grate frames. Movement between the drain body and surrounding tile or pavers points to a failed bonding flange or an improperly bedded drain.
  • Efflorescence or persistent damp spots on adjacent masonry or stucco. This signals moisture escaping sideways from the waterproofing assembly rather than draining correctly.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Schluter roofing repairs in Yorba Linda fall within our standard roofing repair range of $400 – $1,800, and full replacement of affected sections runs higher depending on scope. The range is driven by three things: how much membrane or how many profiles need replacing, whether the drain body or flange must come out and be reset, and whether surrounding tile or pavers have to be removed and reinstalled to make the repair. We quote parts and labor line by line so you see the material cost and the installation cost separately. All work is covered by our 730-Day Done Right Promise, and we pull the permits the job requires and pass inspection before we consider it finished.

DIY or Call Us?

Some checks are safe for a homeowner: verify the drain flange diameter and grate length with a tape measure, photograph the printed label on the component, confirm the slope around a drain with a level, and note where water is pooling or staining. What you shouldn’t do yourself is pull up a bonded waterproofing membrane, reset a drain bonding flange, or attempt to re-flash a penetration. Those steps require the correct thin-set chemistry, proper bonding technique, and an understanding of how the layers tie together; done wrong, they leave a hidden leak that shows up months later as rotted framing and a much larger repair. If you’ve already found the failure, call (888) 255-9354 and we’ll walk you through what to measure before we come out.

FAQs

A new black aluminum pool fence with a gate

How long does Schluter waterproofing last on a roof or deck assembly in Yorba Linda? A properly installed KERDI system with intact seams and a bonded drain can last 20 years or more, but in Yorba Linda’s climate, UV exposure and the seasonal wet-dry cycle shorten the life of exposed terminations and adhesive bonds. Call (888) 255-9354 for a free assessment of your assembly.

Can the failed Schluter part be repaired instead of replaced? Often yes: a localized membrane tear or a single flange reset is a repair, not a replacement, and that usually keeps you in the $400 – $1,800 range. If the membrane is delaminating across a large area, replacement of that section is the honest call. Call (888) 255-9354 to get a straight answer.

How long does the swap take? A single drain flange reset or membrane patch is typically a one-day job once the correct part is on site; larger section replacements can run two to three days. Call (888) 255-9354 to schedule your free estimate.

How do you source the Schluter part? We order directly through Schluter’s distribution network using the part number and series from your existing component, so the replacement matches your assembly exactly. Call (888) 255-9354 and we’ll confirm the part before we order it.

If your Schluter roofing has failed or you’re not sure what part you’re looking at, call (888) 255-9354 to schedule a free estimate. We’ll identify the component, quote parts and labor upfront, and back the work with our 730-Day Done Right Promise.

Written by the team at Groundwork Construction Co. of Yorba Linda, serving Yorba Linda and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new stained cedar privacy fenceA new paver patio with a seat wall and fire pitA single-story rear room addition with tall windows and a new patioA new clay tile roofNew double-hung windows in a dining roomA new front entry door with glass sidelights

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Yorba Linda

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Yorba Linda team

A local vetted partner works across Yorba Linda and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 255-9354
Local Service Coverage

Request a Free Estimate in Yorba Linda

Tell us what you need - Groundwork Construction Co. of Yorba Linda responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch