







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Driveway & Pavers: The Yorba Linda Owner’s Guide
We install and restore PGT-compatible driveway and paver systems in Yorba Linda, and most full paver driveway installations here run $7,000 – $18,000 installed, with resealing and repair work far below that. PGT hardscape components are built to handle heat and load, but Yorba Linda’s inland sun and clay-heavy soil punish them over time, and we can usually schedule an assessment within days, not weeks.
Owners rarely notice the failure all at once. It starts with one paver that rocks when you walk on it, then a hairline joint opening up near the driveway apron, then water pooling where it never used to. By the time a paver pops loose or a retaining edge shifts, the base underneath has usually been moving for a season or two. That pattern is what we see most in Yorba Linda, and it’s the reason a part-level fix beats a full tear-out more often than people expect.
Which PGT Models This Applies To

PGT hardscape lines are specified by profile, thickness, and joint width, not by a single model number stamped on the paver. The identification you actually need is on the pallet band or the original spec sheet: profile name, nominal thickness (typically 60mm for pedestrian and light-driveway use, 80mm for full vehicular load), and the color/finish code. If the pallet tag is long gone, we measure the paver face and match the joint spacing and edge profile against current PGT stock. That measurement step is where most homeowners get burned buying the wrong replacement online: a 60mm paver substituted for an 80mm driveway spec will crack under a loaded truck even though it looks identical on the surface.
On the OEM-versus-aftermarket call: for color-matched repairs and small sections, genuine PGT replacement pavers are worth it because dye lot and finish variation between manufacturers is obvious once installed side by side. For base materials, bedding sand, polymeric joint sand, and edge restraint, we use quality equivalents that meet or exceed the same spec, and here’s the honest part: we don’t stock parts and we don’t carry them on a truck, so sourcing is done per project against your measured spec. To be clear, Groundwork Construction Co. of Yorba Linda is an independent service provider and is not affiliated with PGT.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Driveway & Pavers Is Failing
- Pavers rocking or settling underfoot. The bedding layer has washed out or the base wasn’t compacted to depth. Once a paver moves, joint sand drains away and the movement spreads to its neighbors.
- Joint sand eroding or washing out after rain. In Yorba Linda, the dry-season-to-wet-season swing is brutal on joint sand. Polymeric sand that was installed on a damp joint or in cool weather cures weak and fails within a year or two.
- Efflorescence (white chalky haze) that keeps returning. Moisture is migrating up through the slab or base. Cleaning it away without fixing the water path means it comes back every spring.
- Edge restraint heaving or pulling away. The plastic or concrete edge that holds the field in place has lost its footing, usually from soil movement or a root. This is the single most common cause of a paver run splaying outward at the driveway apron.
- Cracks, chips, or surface spalling on individual pavers. Point-load damage from a heavy vehicle or a paver laid over an uncompacted spot. One cracked paver is a repair; a cluster means the base needs investigating.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Yorba Linda, a full paver driveway installation runs $7,000 – $18,000 installed, and driveway replacement (removing the old surface and rebuilding) runs $5,000 – $14,000. Resealing is far cheaper at $250 – $700, and a paver patio runs $3,500 – $11,000. The range is driven by square footage, whether the base needs excavation and re-compaction, the paver profile and thickness, and drainage corrections like regrading to the street or adding a channel drain. We quote the parts and the labor as separate line items so you can see exactly what a color-matched PGT section costs versus the base work underneath it. Every installation is covered by our 730-Day Done Right Promise, and if it’s not done right, we make it right.
DIY or Call Us?
An owner can safely check a lot of this without lifting a paver: walk the drive and note which pavers rock, hose it down and watch where water pools, and look for white haze or splayed edges. Photograph the failing area with something for scale, and check for the original pallet tag or spec sheet. Where DIY goes wrong is the base. Replacing a single paver without fixing the bedding beneath it just moves the failure one paver over, and resetting an edge restraint requires knowing the soil condition and drainage path, which is where a re-do gets expensive. If water is pooling against your foundation or the driveway apron is lifting, call us at (888) 255-9354 for a free estimate rather than digging in blind.
FAQs

A properly installed PGT paver driveway should last 25 to 30 years or more, but the pavers usually outlast the base and joint sand by a wide margin. In Yorba Linda’s inland heat and clay soil, we typically see joint sand needing refresh every 2 to 4 years and base problems showing up in year 8 to 12 if the original compaction was thin. Call (888) 255-9354 for an exact assessment; estimates are free.
Yes, in most cases a failed section can be repaired without tearing out the whole drive, as long as we can match the PGT profile, thickness, and color lot. Spot repairs that reset the base, re-bed the pavers, and re-sand the joints are common and far cheaper than a full replacement. Call (888) 255-9354 and we’ll tell you honestly whether repair or replacement is the better call.
A spot repair is often a single-day job, while a full paver driveway installation in Yorba Linda typically takes 3 to 5 days depending on square footage, base excavation, and drainage work. We give you a realistic schedule up front rather than a promise we can’t keep. Call (888) 255-9354 to schedule your free estimate and get a firm timeline.
We source per project against your measured spec: profile, nominal thickness, and color/finish code pulled from your pallet tag or spec sheet, or matched by measuring the existing paver if the tag is gone. We don’t stock parts in a warehouse, so every order is placed to your job. Call (888) 255-9354 with your measurements and we’ll confirm the match.
If your PGT driveway or paver system is showing any of these signs, the smartest next step is a free, no-pressure estimate from a team that will measure the failure honestly and quote it line by line. Groundwork Construction Co. of Yorba Linda answers every call with a live person, 24/7, sends background-checked, uniformed technicians, and backs every job with our 730-Day Done Right Promise. We also work with KraftMaid, Cambria, and Silestone on other projects. Call (888) 255-9354 today to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Yorba Linda, serving Yorba Linda and nearby areas.












