







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Driveway & Pavers: The Yorba Linda Owner’s Guide
We install and repair Oldcastle-compatible driveway and paver systems in Yorba Linda, with most paver driveway projects landing between $7,000 and $18,000 installed. This page is for the owner who already has an Oldcastle product in the ground and a joint, edge restraint, or paver that has started to fail. That’s usually how it shows up: a paver at the driveway apron rocks when you step on it, a sand joint washes out after the first winter rain, or a strip of pavers near the street settles a quarter inch below the rest and holds water. You may notice loose sand tracking into the garage, or a corner of the field lifting as the base shifts underneath. Groundwork Construction Co. of Yorba Linda is an independent service provider and is not affiliated with Oldcastle; we work alongside its products every week in this city.
Which Oldcastle Models This Applies To

Oldcastle carries several paver and segmental retaining wall lines, and the right replacement depends on which series you have. The most common residential lines you’ll see in Yorba Linda driveways and front aprons are the larger-format segmental pavers and the standard 4×8 and 6×9 interlocking styles, along with the matching edge restraints, caps, and polymeric joint sand. The catch is that “Oldcastle paver” is a family, not a single product. A 6×9 paver from one series doesn’t match the color, thickness, or chamfer of a 6×9 from another, and substituting the wrong one leaves a visible patch ring in the field.
Here’s how to identify yours before you buy. Pull one paver from a hidden edge or the apron and measure its length, width, and thickness to the nearest 1/16 inch; thickness is the one that matters, because an 80mm paver won’t seat level next to a 60mm paver. Look for an ink stamp or molded mark on the underside or side face with the series name and color code. Photograph the face in daylight – color lotting drifts between production runs, and older stock won’t match fresh stock exactly.
On the OEM-versus-aftermarket decision: for pavers themselves, we generally match the original Oldcastle series and color wherever it’s still produced, because a mismatched aftermarket block reads as a repair from the street. For edge restraints, caps, and joint sand, quality aftermarket equivalents are often the smarter call – the restraint just needs the right profile and a proper spike pattern, and it doesn’t matter who made it. If your paver line has been discontinued or the color is out of production, that’s the point where we talk honestly about a full field replacement versus a partial repair in a hidden area. The KraftMaid, Cambria, and Silestone partners we work with on interiors follow the same rule: match the original where you can, and don’t hide a mismatch where the eye will catch it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Driveway & Pavers Is Failing
Most of what looks like a paver problem is a base or drainage problem showing through. These are the five signals we see on Yorba Linda driveways:
- Rocking or loose pavers. Individual units move underfoot because the bedding sand layer has thinned or washed out, so the paver no longer has even support. Left alone, the movement grinds the joints open and spreads to neighbors.
- Joint sand washing out. The joints between pavers lose their fill after heavy rain, letting water into the base. Once water gets in and can’t drain, the base softens, and that’s when settling starts.
- Settling or dipping in the field. A low spot that holds water after a rain usually means the compacted base wasn’t deep enough or the subgrade under it moved. This is a base fix, not a paver swap, and it’s the one owners most often misdiagnose.
- Edge restraint loosening or heaving. The restraint along the driveway edge holds the field tight; when its spikes pull or the restraint cracks, the outer row spreads and the whole field starts to walk.
- Cracked or spalled pavers near the apron. Freeze-free winters don’t protect pavers here – the sun and traffic load concentrated at the driveway entrance crack brittle units and chip edges over time. Chips at the street side are the earliest sign of an apron that wasn’t detailed right.
One note on local reality: Yorba Linda’s clay-heavy soil holds water longer than sandy ground, so a base that drains fine in summer can soften through a wet winter and only show the dip in spring. We see this pattern most on slopes and on driveways that pitch toward the house.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Yorba Linda, a full paver driveway installation runs $7,000 to $18,000; a concrete driveway runs $4,500 to $12,000; driveway replacement starts at $5,000; and resealing and re-sanding starts around $250. For repair-only work – lifting and re-bedding a settled section, re-setting edge restraint, and re-sanding joints – we quote the actual scope, not a flat number.
What drives the range is base depth and removal. A driveway that needs the old surface torn out, a deeper compacted base to fix a settling problem, or additional drainage will sit at the top of the range. A straight paver install over a sound base sits lower. Our quotes are line-item and upfront: base prep, edging, the pavers and joint sand, haul-away, and labor each show their own line, and the number you see is the number you pay.
| Project | Installed Price in Yorba Linda |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Full driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
Every driveway and paver job we complete is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it backs the work itself, not a disclaimer.
DIY or Call Us?
You can safely do the diagnosis. Photograph the failing area, check for a low spot after a rain, measure the paver thickness, and look for a series stamp. Tightening a joint with fresh polymeric sand on a single small patch is within reach for a careful owner. Resetting edge restraint is where it gets harder: the restraint only holds if its spikes hit compacted base, and a re-set that misses will fail again in one season.
Where DIY goes wrong is under the pavers. Lifting a settled section, re-compacting the base to the right depth, and rebuilding that field with the same pitch is the part that determines whether the repair lasts – and a bad base job is money spent twice. Paver lifting and edge work is heavy, labor-intensive work that isn’t dangerous, but it’s hard on a home’s grading. If you’re not sure whether your issue is the pavers or the base beneath them, call (888) 255-9354 and we’ll tell you straight, free of charge. Our technicians have up to 12 years of experience, and every technician we send is background-checked and arrives in uniform.
FAQs

A well-installed paver driveway on a properly compacted base should last decades – easily 25+ years – with the driveway itself outlasting the base and joints every time. The pavers rarely fail; the base, edge restraint, and joint sand are what need attention first, and re-sanding every few years in Yorba Linda’s wet winters is what keeps the field tight. Call (888) 255-9354 for a free driveway evaluation.
Yes, and it usually can – a single rocking paver, a washout joint, or a loosened edge restraint is a repair, not a replacement. The exception is widespread settling under the base, which needs a lift-and-rebase, and a discontinued color line where a matching paver no longer exists. Call (888) 255-9354 and we’ll tell you which one you’re facing.
A joint re-sand or single-paver repair is often finished in a single visit, and a section lift-and-rebase typically takes a day or two. A full paver driveway install is scheduled over multiple days depending on size and base prep, and we plan the schedule with you before we start. Call (888) 255-9354 for a firm timeline on your specific driveway.
We match from the series name and color code stamped on your paver, plus a measurement of length, width, and thickness, then source from the current production run. If your line is out of production, we tell you upfront and quote options that don’t leave a patchy field. Call (888) 255-9354 and have a photo of the paver ready – our team will work with you on sourcing.
Whether it’s a rocking paver at the apron or a full paver driveway you’ve been putting off, Groundwork Construction Co. of Yorba Linda can tell you what’s actually wrong and what it costs before anything gets torn out. We proudly serve Yorba Linda and nearby areas, and our team offers upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000. Call (888) 255-9354 for a free estimate, and reach a live person any hour of the day or night.
Written by the team at Groundwork Construction Co. of Yorba Linda.












