







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Yorba Linda Homeowners Choose Dvele Construction
We provide independent Dvele construction service in Yorba Linda, handling full kitchen and bathroom remodeling and tile roofing inside Dvele Vive, Sol, and Aura modular homes, plus the panelized custom builds that use the same cassette system. What sets our Dvele work apart is field experience with the actual joints and chases, not a factory script. We are not affiliated with or authorized by Dvele. We’re an independent service provider, and that independence means we can troubleshoot what the factory shipped instead of deferring to a warranty department. Our technicians have up to 12 years of experience, every project is backed by our 730-Day Done Right Promise, and a live person answers the phone around the clock at (888) 255-9354.
Why Trust Groundwork Construction Co. of Yorba Linda for Your Dvele Construction?

Dvele’s Vive, Sol, and Aura homes are built around panelized wall and floor cassettes. Those cassettes have to be set, sealed, and finished in the field, and that’s where most of the real work lives. Our technicians have spent years setting, sealing, and correcting these assemblies across Southern California, so they know how a cassette seam behaves when a foundation shifts a quarter inch, and they know which gaskets compress properly and which tear during transport before the module ever reaches the lot.
We use OEM gaskets, sealants, and connector hardware where Dvele specifies them, and we follow warranty-safe practices on every job: documented seam conditions before we open a joint, proper flashing sequence, and air-sealing checked at adjacent seams before we close up. When factory parts stall a project, we substitute equivalent-rated structural screws, flashing, and weather barriers, then note what we used so your records stay honest. Because we work independent of the manufacturer, we can tell you plainly what’s failing and why. No runaround.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Yorba Linda
Most Dvele issues we see in Yorba Linda trace back to the seams, the chases, or the exterior envelope. Here are the five that come up most.
- Panel joint separation at cassette seams. Gaps open along wall and floor joints after foundation settling or thermal cycling. The gap itself is the symptom; the failed gasket or sealant underneath is the cause. We open the joint, dry and treat the framing, and reinstate the OEM-spec seal.
- Air-sealing failure at seams. When sealant loses adhesion, air leaks follow. On Yorba Linda’s hot, dry summer afternoons and cooler winter nights, that cycling works a failing bead loose faster than in a stable climate. We reseal and verify at the adjacent joints before calling it done.
- Moisture intrusion at roof-to-wall and floor-to-wall cassette interfaces. Factory gaskets compress or tear in transit and during set. Wind-driven winter rain finds those spots, and the damage shows up as a soft spot or bubbling paint near a panel joint, often months after move-in.
- MEP chase misalignment. Electrical and plumbing rough-ins don’t always line up between stacked modules. Field rework is required to bring them into line without cutting into a structural cassette.
- Cladding and weather-barrier damage at lift points. Module lift points and transport seams are where the weather barrier gets compromised. That leads to localized water damage, and it’s easy to miss until the wall behind the cladding softens.
Dvele Parts & Our Repair-vs-Replace Approach

We use genuine Dvele OEM gaskets, sealants, and connector hardware where the specification calls for them, because those parts are engineered to the cassette tolerance. When OEM lead times stall a project, we substitute equivalent-rated structural screws, flashing, and weather barriers and document the swap. We don’t stock Dvele parts locally; each job is sourced to the specific cassette and series, so we order against what the home actually needs rather than guessing from a catalog.
Our default is repair-first on seam and gasket issues. A failed seal is a seal problem, not a panel problem. We only recommend cassette or assembly replacement when a panel has structural damage or chronic leakage that resealing can’t resolve. That decision gets explained to you in writing, not buried in a bid. Call (888) 255-9354 for a free estimate on your Yorba Linda Dvele repair.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We map the affected seams, check adjacent gaskets and flashing, and trace moisture to its entry point. On a Dvele cassette, the visible stain is rarely where the water started.
- 2
Repair or install. We open the joint, dry and treat the framing, then reinstate the OEM-spec seal, gasket, and flashing in the correct sequence. For kitchen and bath work, we set cabinets, tile, and fixtures to Dvele’s chase and panel layout.
- 3
Test. We verify air-sealing at the repaired seam and the two nearest joints, and we check that MEP connections sit properly within the chase. No closing up until this passes.
- 4
Warranty. Every Dvele project we complete is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. That guarantee sits alongside your Dvele manufacturer coverage, not in place of it.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Yorba Linda
We work across the Dvele Vive series, the Sol series, and the Aura series, plus Dvele custom modular and panelized builds that use the same cassette construction. For these homes we handle full kitchen remodeling, full bathroom remodeling, and tile roofing, along with seam and gasket repair, weather-barrier restoration at lift points and transport seams, and MEP chase rework where rough-ins don’t align between modules. If your home is a Dvele and the work touches the envelope, the interior finish, or the joints between them, we service it.
We Also Service These Brands
Dvele isn’t the only system we know. We install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, alongside roofing, window, and paver products from other trusted partners. If your Dvele kitchen or bath calls for one of these brands, or your project spans a second product line, one company handles it from foundation to finish line.
FAQs – Dvele Construction Service in Yorba Linda

Yes, with limits tied to the cassette structure. Moving a non-load-bearing partition, reconfiguring a kitchen or bath, or relocating a fixture within the MEP chase is generally workable. Cutting into a structural wall or floor cassette is not. We confirm what’s load-bearing before any layout change, then price the work honestly. Call (888) 255-9354 for a free estimate.
Dvele handles manufacturer warranty claims on the factory components; we handle the repairs we perform. We’re independent and not affiliated with Dvele, so we don’t file or manage their claims. We do document our own work, and every job we complete carries our 730-Day Done Right Promise. If a repair touches a warranted component, we’ll tell you so you can pursue both.
We open the joint, find the failed gasket or sealant, dry and treat any wet framing, and reinstate the OEM-spec seal and flashing before closing up. The leak almost never starts at the visible stain. On Yorba Linda slopes, wind-driven rain pushes water sideways into seams, so we test the repair and the two adjacent joints before we finish.
Usually yes. A failed gasket or sealant is a sealing problem, not a structural one, and re-sealing is the right fix in most cases. We only recommend panel replacement when a cassette shows structural damage or chronic leakage that resealing can’t hold. We’ll show you which situation you’re in before quoting.
Yes, in specific spots. Dvele cassette construction calls for OEM connector hardware where the specification names it, and cabinets, tile, and fixtures have to be set to the panel and chase layout rather than a standard stick-built wall. We use OEM parts where specified and equivalent-rated hardware when lead times stall the job. Call (888) 255-9354 to schedule a free estimate.
It depends on scope. Here are the ranges we work with in Yorba Linda:
| Service | Typical Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Tile Roof Repair | $600 – $2,500 |
Project pricing is upfront, the number you see is the number you pay, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000. Call (888) 255-9354 for an exact quote. Estimates are free.
Book Your Dvele Service in Yorba Linda, CA
If your Dvele home needs a seam repaired, a kitchen or bath finished, or a tile roof checked, call Groundwork Construction Co. of Yorba Linda at (888) 255-9354. A live person answers around the clock. We’ll schedule your free estimate and design consult, walk the seams with you, and put the scope in writing.
Written by the team at Groundwork Construction Co. of Yorba Linda.












