







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Kitchen Remodeling: The Yorba Linda Owner’s Guide
We install Dvele-compatible kitchen remodeling components in Yorba Linda, and most full kitchen projects in this market land between $14,000 and $45,000 installed. That figure is a written, upfront price, not a rough guess you’ll see change later. When a Dvele kitchen element starts to fail, owners usually notice it before they see it: a cabinet door that drifts and won’t stay closed, a drawer that scrapes the frame, a seam along the counter that spreads after a hot Yorba Linda summer. In Dvele kitchens, the first sign is often a slow sag in a wall cabinet run or a finish that dulls near the range hood, because heat and dry canyon air work on the same joints year after year.
Groundwork Construction Co. of Yorba Linda is an independent service provider. We’re not affiliated with Dvele, and we don’t claim to be. What we do is source the right parts for your specific Dvele build and install them so the correction holds up.
Key Takeaways
- Most Dvele kitchen remodel projects in Yorba Linda run $14,000 to $45,000 installed, with cabinet installation at $4,000 to $13,000 and countertops at $2,000 to $6,500.
- Dvele builds use specific cabinet box depths and hardware patterns; a generic big-box replacement part often won’t align with the existing frame.
- Yorba Linda’s inland heat and dry air stress cabinet joints and finish more than a coastal install would.
- Calls are answered by a live person, 24/7. Every job carries our 730-Day Done Right Promise.
Which Dvele Models This Applies To

Dvele builds its homes in defined series, and the kitchen systems vary by series and by the year of the build. Two things matter most when matching parts: the cabinet box depth and the drawer or door hardware pattern. Standard base cabinets are typically 24 inches deep, but Dvele has used shallower runs in some layouts, and a replacement door or drawer front from a generic supplier won’t line up with the existing hinge boring if the pattern is different. Before we order anything, we measure the box, check the hinge type, and photo the hardware label if there is one. There’s usually a sticker inside a cabinet door or on the back of a drawer box that tells you the series and the hardware maker.
On the OEM-versus-aftermarket question, Dvele-specific means one thing and one thing only: the part matches what’s physically in your kitchen. For hardware, aftermarket equivalents from a known maker are often just as good and arrive faster. For cabinet boxes and door fronts, matching the original finish and boring pattern is where the OEM route earns its keep, and we’ll tell you plainly which side of that line your job falls on. We don’t stock parts, and we don’t carry parts on a truck; we measure, then source the correct part for your Dvele build. We also service KraftMaid, Cambria, and Silestone kitchens, so the same install logic applies if your Dvele kitchen has been updated over the years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Kitchen Remodeling Is Failing
These are the failures we see most often in Dvele kitchens around town, and what’s usually behind each one.
- Doors that drift and won’t stay shut. The hinge plate has loosened from the cabinet side, or the hinge itself has worn. Left alone, the door starts to rub the frame and the finish wears through.
- Drawers that scrape or stick. The slide has lost alignment or the drawer bottom has sagged under a heavy load. A misaligned slide is a simple fix; a sagging bottom usually means the box itself is fatigued.
- Caulk or seam lines spreading along the counter. Movement between the countertop and cabinet run, often from heat cycling. In Yorba Linda, a south-facing kitchen can see this every summer.
- Finish fading or lifting near the range. Steam and grease break down the finish faster in the zone right above the cooktop. Look for dulling first, lifting second.
- Soft spots or swelling at the sink base. A slow leak behind the sink cabinet starts the wood swelling before you see water on the floor. By the time it’s visible, the cabinet box is already compromised.
Replacement Cost & What’s Included

Here are the installed ranges we work from in Yorba Linda, so you can budget before anyone shows up.
| Project | Installed Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
The range moves on three things: the size of the run, the finish and material you choose, and whether the job includes plumbing or electrical moves. We quote parts and labor as line items, so you see what the part costs and what the install costs. Upfront pricing, no surprises. Every job we do is covered by our 730-Day Done Right Promise, and if you’re over $10,000, you qualify for $1,000 off.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: measure the cabinet box depth, photograph the hinge and slide, and look for a label inside a door. That’s information we need anyway, and it saves a trip. Where DIY goes wrong is the install itself. Cabinet boxes carry load, and a door hung out of alignment will pull the frame and crack the finish within a season. Countertop seams need the right adhesive and clamping pressure; get that wrong and the seam spreads again by the next hot spell. There’s no high-tension or electrical danger here the way there is with a garage door spring or a panel, but the finish and fit problems are real and they compound. Most jobs are completed in a single visit once the right part is in hand. If you’re not sure whether it’s a part swap or a repair, call us at (888) 255-9354 and we’ll tell you straight.
FAQs

Plan on 10 to 15 years for cabinet hardware under normal use, with a shorter life in a south- or west-facing kitchen that sees more afternoon heat. Slides and hinges wear first. Call (888) 255-9354 for an exact quote; estimates are free.
Sometimes, yes. A loose hinge or a misaligned slide can often be reset and adjusted rather than swapped. A cracked box or a swollen sink base is a replacement. We’ll check before we sell you a part. Call (888) 255-9354 to schedule a free estimate.
A single door, drawer, or slide swap usually takes under an hour; a cabinet run or countertop job runs longer. Most of our kitchen jobs are completed in one visit. Call (888) 255-9354 for a free estimate and a clear timeline.
We measure the existing cabinet box, hinge pattern, and hardware label first, then source the correct part for your Dvele series. We don’t stock parts and don’t carry them on a truck, so the part is ordered to match your kitchen, not a guess off a shelf. Call (888) 255-9354 to get started.
Schedule Your Free Estimate
If your Dvele kitchen in Yorba Linda is showing any of these signs, the sooner we look, the cheaper the fix. Call (888) 255-9354 and a live person will answer, any hour, any day. We’ll measure, tell you honestly whether it’s a repair or a replacement, and give you a written price before anyone starts. The number you see is the number you pay, backed by our 730-Day Done Right Promise. Groundwork Construction Co. of Yorba Linda also serves nearby communities, and we offer 0% financing for 18 months to make a larger kitchen project easier to plan around.
Written by the team at Groundwork Construction Co. of Yorba Linda, serving Yorba Linda and nearby areas.












