







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Kitchen Remodeling: The Yorba Linda Owner’s Guide
We install Cambridge Pavers-compatible kitchen remodeling in Yorba Linda, and a full kitchen remodel here typically runs $14,000 – $45,000 installed, depending on layout, cabinet line, and countertop material. From our experience, the failures show up in the same order almost every time: a soft or bowed cabinet box near the sink first, then doors that won’t stay aligned, then a countertop seam that opens up as the substrate moves underneath it. In Yorba Linda homes, that pattern often starts with a single small leak at the sink base that goes unnoticed until the cabinet floor swells, or a slab that shifts because a hard-fired tile or paver-style floor wasn’t set on a properly prepped subfloor. If you’re seeing any of it, you’ll want a real diagnosis before you price a replacement.
Which Cambridge Pavers Models This Applies To

Cambridge Pavers kitchen remodeling covers a narrow set of system parts: cabinet boxes on their paver-integrated or slab-style base, drawer glides, hinges, toe-kick trim, and the transition pieces where a paver-style floor meets cabinetry. The fit depends on the box depth, glide length and hole pattern, hinge brand, and whether the job used a standard or custom toe-kick height. Before you order anything, pull one door and look at the box’s internal label or brand stamp on the back panel and the underside of the drawer; measure the glide’s extended length in inches and check every mounting-hole spacing on the bracket. That measurement pair is what makes or breaks a match.
OEM Cambridge Pavers parts give you the exact fit, but they’re generally slower to land and priced higher. A quality aftermarket glide or hinge from a reputable brand can match the hole pattern and torque load just fine when you confirm the extended length and weight rating against the original. We don’t stock parts and we don’t carry inventory on a truck. Groundwork Construction Co. of Yorba Linda is an independent service provider and isn’t affiliated with Cambridge Pavers. We order the right part for your specific model and install it on-site, so you’re not forced to buy a whole new box for one failed glide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Kitchen Remodeling Is Failing
Here are the five symptoms we see most in Yorba Linda kitchens, and what’s actually going on beneath each one.
- Drawer glides that stick or jump the track. Usually a bent or worn roller, or a track that’s gone out of parallel with the box because the mount loosened. A straight glide swap fixes it; a misaligned mount needs the bracket re-set too.
- Doors that won’t stay closed or hang crooked. Worn or stripped hinge screws are the usual culprit, often because the hinge plate pulled out of soft wood near a sink or dishwasher. Oversized or shimmed screws are a temporary patch, not a repair.
- A soft, bowed, or discolored cabinet floor. Water intrusion has swollen the substrate, typically from a slow sink-base leak or a dishwasher gasket. The floor and the affected box section are the priority, not the countertop.
- A countertop seam or backsplash joint that’s opening. The substrate underneath has moved, or the original adhesive has failed along a stress line. Left alone, that gap takes on water and the damage spreads.
- A paver-style floor that rocks near the toe-kick. The subfloor wasn’t prepped properly before setting, so the piece is moving under the cabinet edge. Resetting the piece and the transition trim is the correct fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Yorba Linda, installed, with labor and the replacement part included.
| Scope | Installed price in Yorba Linda |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range depends on how much of the system needs work, the material tier you pick, and whether a countertop or island has to come out to fix a substrate issue. We write line-item quotes so you see the part, the labor, and the trim separately, and the number you see is the number you pay. Every job is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. Nothing is padded to cover parts we didn’t use.
DIY or Call Us?
You can safely pull a door or drawer and read the model label, measure the glide and hinge specs, and confirm whether a soft box is a surface stain or actual water damage. Anything beyond that – re-setting a countertop seam, straightening a bowed substrate, replacing a glide bracket that pulled out of the box, or re-prepping a floor so the paver piece stops rocking – is where a homeowner’s fix usually turns into a second repair. There’s no high-tension spring or live wiring in this part, so the risk is less about injury and more about doing a partial job that fails again in a month. That’s the part the 730-Day Done Right Promise exists to cover.
We don’t stock parts and we don’t advertise same-day swaps from a truck. What we do is identify the exact Cambridge Pavers part for your model, order it, and install it once with the surrounding issue handled. Call (888) 255-9354 for a free estimate and we’ll tell you plainly whether it’s a part swap or a broader repair before you commit to anything.
FAQs

How long do Cambridge Pavers kitchen remodeling parts last? Most cabinet glides and hinges last 10 to 15 years under daily use, and often less in Yorba Linda kitchens near the sink or dishwasher where moisture and heat do the most damage. When a part fails early, the cause is usually a mounting issue rather than the part itself, and that needs checking too. Call (888) 255-9354 for a free estimate.
Can it be repaired instead of replaced? Sometimes yes – a stripped hinge screw can be re-set, and a slightly bent glide can be straightened. But a swollen box floor, a substrate that moved under a countertop, or a floor piece that’s rocking because it wasn’t prepped right won’t hold a patch. We’ll tell you honestly which one you’re looking at. Call (888) 255-9354 for a free estimate.
How long does the swap take? A glide or hinge swap is usually a single-visit job. A countertop seam re-set, a bowed cabinet section, or a paver-floor piece that needs re-prepping takes longer because the substrate has to be corrected before the finish goes back on. Most jobs are finished in one visit; the rest are quoted with a clear timeline up front. Call (888) 255-9354 for a free estimate.
How do you source the part? We confirm your model and the exact glide or hinge specs from the box label and measurements, then order the OEM part or a quality aftermarket equivalent that matches the hole pattern and load rating. We don’t carry parts in stock and we don’t bring them out on a truck. You’ll know exactly what’s coming and when. Call (888) 255-9354 for a free estimate.
We work with Cambridge Pavers on kitchen remodeling and also handle KraftMaid, Cambria, and Silestone for the cabinet and countertop side of the job across Yorba Linda and nearby areas. Whether your next step is a single part or a full kitchen remodel, the 0% financing for 18 months and $1,000 off projects over $10,000 apply, and a live person answers our line around the clock at (888) 255-9354.
Written by the team at Groundwork Construction Co. of Yorba Linda, serving Yorba Linda and nearby areas.












