







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The Yorba Linda Owner’s Guide
We install and repair ActiveYards driveway and paver systems for Yorba Linda homeowners, and a full paver driveway installation here typically runs $7,000 to $18,000 depending on square footage, base prep, and border detailing. Once an ActiveYards paver field starts failing, it rarely does so quietly: most owners notice it after a winter of rain when a section of pavers settles unevenly, a border course pulls away from the field, or a low spot in the driveway starts holding water against the garage slab. You might also see polymeric sand washing out of the joints faster each season, or hear a hollow thud when you walk across a single paver that’s no longer sitting tight. That thud means the sand setting bed has shifted underneath, and it’s the earliest reliable sign the base or joint system needs attention.
Which ActiveYards Models This Applies To

ActiveYards produces several paver product lines with different thicknesses, edge profiles, and surface textures, and the compatibility question almost always comes down to thickness and color match rather than a model name. The key spec: ActiveYards pavers are generally specified in standard 60mm and 80mm thicknesses, with the thicker profile being the one called for on driveways that take vehicle traffic rather than patios. If you’re replacing a single paver or adding a border course, match both the thickness and the face texture to the existing field, because a 60mm paver dropped into an 80mm field will rock and fail fast.
To identify what you have, pull one loose paver if possible and measure the side profile with a tape; check for a stamp or lot marking on the underside. ActiveYards color names are consistent across a line, but dye lots vary between production runs, so an exact color match on a partial repair is a real gamble even within the same product family. That’s the OEM-vs-aftermarket decision in a nutshell: for a full replacement, a quality aftermarket paver in the same thickness and a compatible color works fine and often costs less; for a spot repair, sourcing the matching ActiveYards unit is usually worth the wait to avoid a visible patch. We walk Yorba Linda homeowners through both paths before quoting.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Driveway & Pavers Is Failing
- Rocking or hollow-sounding pavers. A paver that moves underfoot has lost contact with the sand setting bed, usually because the compacted base beneath it settled or washed out. Left alone, that single paver spreads movement to its neighbors.
- Polymeric sand washing out of the joints. In Yorba Linda’s dry summers followed by winter rain, joint sand erodes if it was under-filled or if water is running across the surface instead of off it. Repeated loss points to a drainage or slope problem, not just old sand.
- Border pavers separating from the field. Edge restraint is what holds a paver driveway together. When the border pulls away, the plastic or concrete edge restraint has usually loosened or failed, and the field will start to spread outward.
- Uneven settling or a dip that holds water. A low spot that ponds after rain means the base wasn’t compacted deep enough or has since settled. Ponding water finds its way into the joints and accelerates everything else.
- Efflorescence or persistent staining. White mineral bloom or dark stains that won’t scrub out can signal moisture trapped under the pavers. It’s often the base or drainage telling you something before the surface fails outright.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Yorba Linda, a full paver driveway installation runs $7,000 to $18,000, and a driveway replacement of an existing surface runs $5,000 to $14,000. For a lighter correction, re-sanding and resealing existing pavers runs $250 to $700. A paver patio, if your ActiveYards project extends to the backyard, is $3,500 to $11,000.
What drives the range: total square footage, how much base excavation and re-compaction is needed, whether edge restraint has to be rebuilt, and the paver line and thickness you choose. Our quotes are written line-item so you can see parts and labor separately, and the number you see is the number you pay. Every ActiveYards installation we complete is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right, in writing.
| Scope | Yorba Linda Installed Range |
|---|---|
| Paver driveway installation (new) | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Re-sand and reseal existing pavers | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
DIY or Call Us?
You can safely do a few things yourself: sweep and inspect the joints, check whether the polymeric sand is topped off, look at the edge restraint along the driveway perimeter, and note where water ponds after rain. Those checks tell you what’s failing and help you describe it accurately.
Where DIY goes wrong on pavers is the base. Pulling a few pavers to “fix” a low spot and re-bedding them on the same uncompacted base just moves the problem a few feet down the driveway, and a driveway that shifts under vehicle weight is a trip-and-fall hazard for anyone walking it. Correcting base compaction, slope, and edge restraint takes plate compactors and proper depth, and doing it wrong twice costs more than getting it right once. We’re an independent service provider, not affiliated with ActiveYards, and we handle the whole scope from base to finish. Call (888) 255-9354 for a free estimate, and a live person answers, day or night.
FAQs

How long does an ActiveYards paver driveway last in Yorba Linda?
A properly installed ActiveYards paver driveway lasts 25 to 30 years or more when the base is compacted correctly and the joints are maintained. In Yorba Linda’s dry inland climate, the pavers themselves hold up well; it’s the sand joints and edge restraint that need attention every few years to protect the base. Call (888) 255-9354 for a free assessment, and estimates are free.
Can my ActiveYards driveway be repaired instead of fully replaced?
Yes, if the failure is isolated to a section, a border, or lost joint sand, a targeted repair is often the right call and costs a fraction of a full replacement. If the base has settled across a large area or drainage is failing, a partial patch just delays the bigger job. We’ll tell you honestly which you’re looking at.
How long does it take to replace the pavers?
A typical Yorba Linda driveway replacement takes two to four days depending on square footage, base work, and curing time for the setting bed. Most prep and base work happens first, with the paver field and edge restraint following. Call for a specific timeline on your project.
How do you source the right ActiveYards part?
We identify the product line, thickness, and color by measuring the existing field and checking for stamps or lot markings, then source a matching unit or a compatible aftermarket paver in the same profile. Exact dye-lot matching is never guaranteed on a partial repair, which we tell you upfront. We also service KraftMaid, Cambria, and Silestone systems for homeowners with other projects. Call (888) 255-9354 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Yorba Linda, serving Yorba Linda and nearby areas.












