







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Laguna Beach: What the Job Actually Involves
Metal roofing in Laguna Beach costs $15,000 to $40,000 for most homes, and a full install runs 1 to 3 weeks from tear-off to final inspection. The job means removing the old roof, checking and often repairing the deck and framing, then locking down a wind-rated metal panel system with fasteners engineered for salt air and Pacific storms. Call (888) 255-9354 for a free on-site estimate.
How We Do Metal Roofing: The Stage-by-Stage Sequence

Five stages. Here’s what happens and when you decide.
Stage 1: Tear-off and deck inspection (1 – 3 days)
We strip the existing roof down to the sheathing. On Laguna Beach homes, this is where surprises surface: ocean-facing exposures often hide dry rot in the deck boards and fascia, and hillside homes built on pier-and-post or cantilevered decks sometimes have framing that needs sistering before anything goes back down. You’ll get photos and a written change order before we touch anything structural.
Stage 2: Structural and substrate prep (1 – 2 days)
Damaged sheathing gets replaced, and we install underlayment rated for coastal wetting cycles. On homes in the 92651 hillside zones, we check that the flashing tie-ins at valleys, chimneys, and wall transitions can handle wind-driven rain. You decide here whether to add a radiant barrier or high-temp underlayment, which matters more on a metal roof because panels get hot.
Stage 3: Panel layout and the material decision (day 1 of install, confirmed before tear-off)
Pitch, panel length, and seaming method get locked in. Long panels reduce seams and leaks but may require a crane or hoist on steep or tight canyon lots. You’ll approve the panel profile, color, and gauge before we order. Most installers can’t cut long panels on-site, so this lead time is real.
Stage 4: Panel and fastener install (2 – 5 days)
Panels go down in sequence with concealed or exposed fasteners, depending on the system. Fasteners in Laguna Beach need coastal-grade corrosion resistance, not standard zinc, or they’ll fail years before the panels do. Ridge caps, closures, and edge trim finish the assembly. Trim fabrication on-site adds a day on complex rooflines.
Stage 5: Flashing, sealant, and inspection (1 – 2 days)
Final flashing detail, penetration sealing, and gutter reconnection. Then the inspection. Coastal and hillside homes may require wind-load documentation the city wants to see at final. We handle the paperwork and correct anything the inspector flags.
A metal roof is often part of a full Roofing in Laguna Beach scope, where we’re also addressing fascia, ventilation, or drainage at the same time. If you’re planning broader work, our Roofing service covers the full project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make: Metal Roofing Spec and Materials
Panel material, profile, gauge, and color are the four decisions. Each has a real trade-off.
- Panel material – steel vs. aluminum vs. zinc: Steel is the most common in Laguna Beach because it’s strong and handles well, but it must be coated or painted to survive salt air. Aluminum resists corrosion without painting and suits ocean-front roofs, but costs more and can dent. Zinc lasts longest against marine exposure but carries the highest price and limited color options.
- Profile – standing seam vs. through-fastened panels: Standing seam uses concealed fasteners and a raised seam, which eliminates thousands of little penetrations and handles wind uplift better. Through-fastened panels are cheaper and faster but the exposed screws are the first thing to fail in coastal humidity. On a storm-exposed Laguna Beach roof, standing seam is usually worth the difference.
- Gauge – 24 vs. 26: 24-gauge steel is the coastal standard for wind-exposed roofs and adds roughly $2,000 – $5,000 across a typical Laguna Beach job. 26-gauge works on sheltered, low-pitch sections but flexes more under wind load and is less forgiving of foot traffic during install.
- Finish and color: Baked-on Kynar finishes hold color longer under UV and salt than standard paint systems, and light colors reduce heat gain on a sun-exposed roof. HOA and design-review boards in Laguna Beach care about color, so confirm approval before ordering.
- Brand: We source from established metal panel manufacturers and pair the roof with matching trim and closures from the same system, so warranties aren’t split. Where homes use fiber-cement or James Hardie trim at the fascia and gables, we coordinate those details before the roof goes on.
See the difference
Before
After
Before
After
Before
AfterWhat Metal Roofing Costs in Laguna Beach, CA

Most metal roofing in Laguna Beach falls between $15,000 and $40,000. Where your job lands depends on five variables:
- Roof size and pitch: A shallow, simple 1,200 sq ft roof sits at the low end. Steep slopes, complex valleys, and multiple hips on a hillside home push toward the high end and slow the install.
- Existing condition: Dry rot, failing deck framing, or a second layer of old roofing to remove adds tear-off and carpentry time. Hiding rot under new panels isn’t something we do.
- Material choice: Steel sits in the middle. Aluminum or zinc panels at the top of the range can add thousands. Standing seam adds cost over through-fastened panels.
- Access: Canyon and hillside lots with tight driveways may need a crane or hoist, priced separately.
- Permit and inspection scope: Hillside and coastal design-review layers can add time and cost to the permit process.
A written estimate itemizes tear-off, deck repair allowance, underlayment, panels, fasteners, flashing, trim, and permit fees. What it can’t include is hidden rot you can’t see until the tear-off, so we list a repair allowance and show you the actual cost with photos before any change. That’s upfront pricing: the number you see is the number you pay on the scope we agreed, and if something structural surfaces, you approve it in writing first.
Every project is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. The Laguna Beach service area is covered for on-site estimates.
Serving Laguna Beach, CA – Our Local Coverage Area
We serve Laguna Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
The Landscape and Coastal-Review Reality That Shapes a Metal Roof in Laguna Beach
Laguna Beach homes sit on hillside and canyon lots where almost every roofing project turns into a slope, drainage, and design-review story. A roof on a Temple Hills home cantilevered out over a canyon and an Arch Beach Heights home on pier-and-post framing have very different wind exposure than an inland roof, and the metal panel system has to be spec’d for the actual uplift load at that elevation, not a flat-lot average.
The Village and cove beach cottages built in the 1920s – 40s and the mid-century decks-and-glass homes on the bluffs are the two stocks we see most. On the older cot












