







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Irvine, CA: What They Cost and How the Job Runs
Custom & Geometric Windows in Irvine are shaped, angled or arched units built to a specific opening rather than pulled from a stock size list, and a typical Irvine install runs $6,000 – $22,000 for a set of three to eight windows depending on glazing, frame material and whether the rough openings have to change. Most Irvine jobs take two to four weeks from signed contract to final inspection, with the build of the units themselves eating ten to fifteen business days of that. Call (888) 255-9354 for a free on-site estimate.
How a Custom & Geometric Window Project Actually Runs, Stage by Stage

People who buy custom shapes usually want to know exactly what they’re signing up for before a deposit leaves their hands. Here’s the real sequence, with the wait times that matter.
Stage 1: Measure and template (day 1, about 90 minutes)
We template every opening rather than tape-measuring it. Arched and angled units fail on radius mismatch, so a physical template or a digital laser scan of the opening is what the manufacturer builds to. You decide the window style on this visit: fixed, operable, casement, awning or a mix. Fixed units cost less and seal better; operable units let you vent a room but add hardware and a higher unit price.
Stage 2: HOA and city submittal (days 2 through 20, mostly waiting)
In Irvine this is the long pole, and it’s the stage that surprises out-of-town contractors. You’ll approve a drawing set, then it goes to your village association’s architectural committee and to the city for permit. Frames, glass, grille patterns and exterior color all get reviewed. Plan on two to four weeks for approval on a typical Irvine submittal, longer if the design review board asks for a revision.
Stage 3: Unit fabrication (ten to fifteen business days, runs parallel to permitting)
Once the template and spec sheet are signed off, the window units get built. Lead time stretches for radius glass, true divided lites and non-standard colors. We schedule the install date against the permit approval, not against the fabrication date, so you’re not sitting on finished product with no green light to install.
Stage 4: Removal and installation (one to two days)
Most custom sets are a single-day install; larger projects or second-story work run two. We protect floors and furniture first, pull the old units, check the rough opening for rot or framing problems, set the new units, flash and seal, then insulate and trim. If the opening has to be enlarged or reshaped for a geometric unit, add a day for framing and stucco repair.
Stage 5: Inspection, trim and walkthrough (day after install)
The city inspects the installation, then we finish interior trim, touch up paint at the trim line and walk the job with you. You get the signed-off permit and the warranty paperwork at the walkthrough. One thing worth knowing before you start: your window supplier’s product warranty and our workmanship coverage are two separate documents, and you should read both. Our labor sits under the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Be Choosing Between
Most of the money in a geometric window job is decided in about an hour of conversation. Here’s what that conversation covers.
- Frame material: vinyl vs. fiberglass vs. wood-clad. Vinyl is the lowest-cost path and holds up fine in Irvine’s dry heat, but vinyl can’t be bent into tight radii, so tight arches need a different frame. Fiberglass handles curves and heat better at a mid-range price. Wood-clad aluminum, the Andersen and Marvin end of the market, gives you the widest shape and finish options and the longest service life, at the highest unit cost.
- Glass package. Standard dual-pane is the baseline. A low-E coating with argon fill runs more per unit and makes a real difference on west-facing glass in Irvine’s summer sun, where a plain pane turns a room into an oven by 3 p.m.
- Grille pattern. True divided lites, simulated divided lites and grilles-between-glass all give you the divided look at three different prices and three different cleaning burdens. Simulated is the usual compromise.
- Operable vs. fixed. Fixed units are cheaper, seal tighter and never have a screen to replace. Operable units are worth the upcharge in bedrooms and any room without another vent path.
- Interior finish. Stained wood, primed wood, or factory-finished trim. Factory finish costs more up front and saves you a repaint in three years.
What Custom & Geometric Windows Cost in Irvine, CA

Plan on $6,000 – $22,000 for a custom or geometric window project in Irvine. Simple sets with vinyl frames and fixed units land near the bottom; wood-clad frames, large radius units and reshaped openings land at the top. The five things that move the number most: unit count and size, the complexity of the shape (an eyebrow arch is cheaper than a full half-round or a trapezoid), frame material, whether the rough opening has to be reframed, and how much HOA and city review the project triggers.
Your written estimate should list each opening with its dimensions, the unit spec, the frame material, the glass package, the trim, permit fees and the install labor as separate lines. What’s typically not included is interior drywall repair beyond the trim line, exterior stucco patching on a reshaped opening, and any structural work discovered after the wall is opened. We price those before work starts, not after, so the number on the page is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to This Job
Almost every home in Irvine went up after 1970 as part of a master-planned village, which means two things for windows. First, the stock is uniform: Mediterranean stucco walls, tile roofs, attached townhomes in places like Woodbridge, Northwood and Turtle Rock. Second, the design rules are uniform too. HOA architectural review is not a formality here, and a geometric window that changes the exterior elevation will get reviewed on shape, color and grille pattern before the city even sees the permit. That approval gauntlet is the single biggest schedule variable on an Irvine job.
The climate adds its own wrinkle. Santa Ana wind events push ember-laden air against homes near the open-space edges in Turtle Rock, Quail Hill and Orchard Hills, so we spec tempered or laminated glass and ember-resistant venting on those properties as a matter of course. Homes in the 92606 and 92614 ZIP codes we work on most often show the same failure pattern: west-facing original glass that’s gone hazy and lost its seal, and stucco surrounds that need careful flashing detail so the new unit doesn’t leak at the first hard rain. If the wider project includes trim, siding or entry doors, it’s worth looking at our Windows & Doors in Irvine page for the full scope, and homeowners often pair this with Concrete Driveways & Concrete Work in Irvine when the front elevation is getting a full refresh.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Irvine

Two to four weeks from contract to final inspection, with the actual install taking one to two days. The rest is templating, fabrication, and HOA plus city approval, and the approval step is the one that moves most in Irvine.
Yes. Irvine requires a permit for window replacement and installation, and any change to the exterior elevation also triggers your village association’s architectural review. We prepare the submittal drawings and pull the permits as part of the job.
In most cases, yes. A same-size swap is straightforward. Enlarging or reshaping an opening is where framing, electrical or plumbing relocations can appear, and we flag those before the estimate is final rather than mid-job. If the project grows into something broader, our Windows & Doors service covers the full range.
One custom-shaped unit with install typically runs $1,800 – $5,500 in Irvine, depending on frame material, size and whether the opening changes. A full set is where the $6,000 – $22,000 range applies. Call (888) 255-9354 for an exact quote on your openings.
The window units carry the manufacturer’s product warranty, and our installation labor is covered by the 730-Day Done Right Promise. If something we installed isn’t right, we come back and make it right. You get both documents in writing at the walkthrough.
We also cover the surrounding communities, and you can see the full area we work on the Irvine service page. If the driveway or hardscape is part of the same refresh, homeowners often pair this with Asphalt Driveways & Resurfacing in Irvine.
Get a Free Custom & Geometric Windows Estimate in Irvine
Call (888) 255-9354 to schedule a free on-site estimate for custom and geometric windows in Irvine. A live person answers around the clock, and we’ll set a time that works for you. On the visit we template your openings, walk through frame and glass options, explain what your HOA review will require, and leave you with a written line-item quote. No pressure to sign on the spot.
Written by the team at Groundwork Construction Co.












