







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in Irvine, CA: What It Involves and What It Costs
Window Replacement in Irvine, CA typically runs $4,500 – $15,000 for a full-home or major multi-room job, and most homes are finished in two to four days once materials land on site. The work means pulling the old sashes and frames, checking the rough openings for rot or stucco damage, setting new units, sealing and flashing them properly, then trimming and finishing both sides. To price your specific house, call (888) 255-9354 and we’ll walk the openings with you.
How a Window Replacement Actually Unfolds, Day by Day

Window replacement is a sequence, not a single event. Here’s the real order of operations on an Irvine job, what gets decided when, and roughly how long each stage takes.
Stage 1: Measure and confirm the order (before any work starts)
We measure every opening, note the frame depth, check whether the existing units are flush or inset into the stucco, and confirm the configuration you want. This is where you lock the material, glass package and finish. On Irvine homes with original 1980s or 1990s aluminum frames, we also check for the thin stucco return that has to be rebuilt when the new unit goes in deeper. Allow one to two weeks for the order to be fabricated and delivered.
Stage 2: Protect the interior and stage the site (day 1, morning)
Furniture gets pulled back or covered, floors get drop cloths, and we set up outside access. A crew of two to three can usually prep a whole house in half a day. You’ll want to move anything fragile away from the windows yourself the night before.
Stage 3: Demo and opening prep (day 1 into day 2)
Old sashes come out, frames are cut free, and we inspect the rough opening for water damage, cracked stucco or missing flashing. This is the stage where surprises show up, and it’s why we don’t quote blind. If rot turns up around a sill, we address it before the new unit goes in, not after.
Stage 4: Set, shim, seal and flash (day 2 into day 3)
New units are set plumb and level, shimmed, and fastened. Flashing goes on before sealant, and the exterior gets sealed to the stucco with a backer rod and a proper exterior sealant. Interior trim goes back on and gets caulked. Most single-family homes are weather-tight by the end of day three.
Stage 5: Finish, clean and walkthrough (day 3 into day 4)
Touch-up paint on trim, hardware install, glass cleaning, and a walkthrough where we open and close every unit with you and confirm the locks and screens. Anything that isn’t right gets noted and fixed on the spot. Then it’s covered by our 730-Day Done Right Promise, in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Window Replacement
Most of the decisions on this job come down to four or five forks in the road. Here’s what each one means for your Irvine home.
- Frame material: Vinyl is the value pick, low maintenance and a solid thermal performer, though colors are limited and it can look flat against stucco. Fiberglass holds paint and handles heat better. Wood-clad aluminum gives you a real wood interior and a durable exterior, at a premium. We work with Andersen and Marvin on the higher-end clads.
- Glass package: Dual-pane with a low-E coating and argon fill is the standard for Irvine’s sun load. Tempered glass is required near doors and at floor-level units. Laminated glass adds sound control on busy streets; on homes near open space, ember-resistant and tempered assemblies make sense during Santa Ana season.
- Style: Single-hung and casement are the most common replacements in Irvine tract homes. Sliding units suit wide openings. Fixed picture windows cost less per square foot but need operable units nearby for ventilation.
- Whole-unit vs. pocket replacement: Pocket replacement reuses the existing frame and costs less. Full-frame replacement means pulling the frame and reworking the stucco, which is the right call when the original frames are failing.
- Exterior finish: Most Irvine homes need a color that satisfies HOA review, so we confirm the approved palette before ordering. James Hardie trim is a common pairing on the exterior detailing.
What Window Replacement Costs in Irvine, CA

A full-house Window Replacement in Irvine typically lands between $4,500 and $15,000. A handful of units on a condo runs the low end; a 2,500-square-foot single-family home with 15 to 20 openings pushes toward the top.
Four things move the number:
- Unit count and size: More openings and larger picture windows raise the total. A single large slider can cost as much as three standard bedrooms.
- Frame condition: Rotted sills, cracked stucco or missing flashing add repair scope before the new unit can go in.
- Material grade: Vinyl sits at the bottom, fiberglass mid, wood-clad aluminum at the top. Glass upgrades like laminated or tempered add per unit.
- Permit and HOA scope: Exterior changes in Irvine often trigger both city permitting and association review, and the review can add weeks and a submittal fee.
Our written estimate is line-item, with the unit count, the material and the finishing scope spelled out, so the number you see is the number you pay. Excludes: structural framing repair, drywall replacement beyond trim, and exterior painting. Call (888) 255-9354 for your free on-site estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to This Job
Irvine is a master-planned city, built almost entirely from the 1970s forward, and that single fact shapes every window replacement here. The housing is uniformly recent tract and village construction: Mediterranean and Spanish-revival stucco, tile roofs, attached townhomes in Woodbridge, Northwood and Turtle Rock. You’re rarely dealing with a century-old frame. You’re dealing with 1980s and 1990s original aluminum units that have hit the end of their service life.
The bigger wrinkle is governance. Almost every village sits inside an HOA with its own architectural-review process, and exterior changes like window color, mullion pattern and frame style need to clear that review before you can order. In some villages that means a submittal and a wait. We plan the schedule around it, not around it.
Climate matters too. Irvine is semi-arid coastal Orange County, with hot, dry Santa Ana wind events and very little rain. That puts a premium on proper flashing and ember-resistant detailing, especially in the foothill-edge villages. The failure we see most often: original aluminum frames that have lost their seal and weep water into the stucco return, which you only find when the old unit comes out. If your exterior scope is part of a full Windows & Doors in Irvine project, we’ll coordinate it. We cover Irvine and the surrounding villages, including ZIP codes 92612, 92603, 92616 and 92618.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Window Replacement in Irvine

Most single-family homes are finished in two to four working days once the units arrive on site. Order and fabrication lead time typically runs one to two weeks before that, and HOA review can add one to three weeks in Irvine. Call (888) 255-9354 to get a schedule estimate for your house.
Yes, most exterior window replacements in Irvine require a city permit, and many villages also require HOA architectural approval. We pull the permit, handle the inspection, and prepare the submittal for the association where needed. Call us to confirm what your specific village requires.
In most cases, yes. A standard replacement reuses the existing rough opening, so plumbing and framing stay untouched. The exception is when the opening has failed and needs reframing, which we’ll flag during the measure visit. Ask for a written line-item estimate so you can see exactly what’s in scope.
Most jobs land between $4,500 and $15,000, depending on unit count, material and condition. Whole-house vinyl replacements sit at the low end; wood-clad aluminum on a larger home with stucco repairs pushes toward the top. Call (888) 255-9354 for a free estimate with pricing spelled out.
Our workmanship is covered by the 730-Day Done Right Promise, and window units carry their manufacturer’s own product warranty alongside it. That’s two years of coverage on the install itself, in writing, with no fine print. Call (888) 255-9354 with questions or to schedule your estimate.
Get a Free Window Replacement Estimate in Irvine
Window replacement in Irvine is a planned job, so let’s plan it. Call (888) 255-9354 and a live person picks up, day or night. We’ll set a free on-site visit, measure every opening, walk you through the frame and glass options, and leave you with a written line-item estimate. Homeowners often pair exterior work with a Vinyl Fence in Irvine or an Aluminum Fence in Irvine while the crew is already on site. You can also review our Windows & Doors service to see the full scope.
Written by the team at Groundwork Construction Co.












