







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Irvine: What It Costs and What the HOA Wants to See
Metal roofing in Irvine runs $15,000 – $40,000 for most detached homes, and a straightforward re-roof takes 5 – 10 working days once the material is delivered. The first real hurdle usually isn’t the roof at all: it’s the architectural submittal. Irvine is built almost entirely inside master-planned villages with active HOAs, so a metal roof here means picking a profile and color the village association will actually approve, then installing it to that spec with matching panels and trim. Call (888) 255-9354 for a free on-site estimate and a written line-item quote before you sign an HOA application.
How a Metal Roof Goes On in Irvine, Step by Step

We run this job in five stages. Each one has a decision that belongs to you, and it helps to know where those decisions land before the crew shows up.
1. On-site measure and HOA research (day 1)
We measure every plane, pitch and penetration and photograph the existing tile or shingle. In parallel, we pull your village association’s published color palette and design guidelines. This is where most Irvine metal roof projects stall when a homeowner goes it alone: they order a color first and find out later the ARB never approved it. You’ll leave this stage with a measured roof and a short list of approved profiles and colors.
2. Architectural review submission (weeks 1 – 4, depends on the association)
We prepare the submittal packet: product cut sheets with manufacturer color names, panel profile drawings, eave and valley details, and finished photos of comparable installs. You sign it as the owner. Review time varies widely by village, so we build the schedule around it rather than promising a start date we can’t hold. Nothing gets ordered before written approval lands.
3. Tear-off and deck inspection (days 1 – 2 of work)
Old roofing comes off to the deck. We inspect sheathing for rot and re-nail anything loose to current code, since a 1970s or 1980s tract home often has fasteners that won’t hold a new panel system. You decide here whether to add a self-adhered underlayment upgrade, which we recommend on any home at the open-space edge.
4. Underlayment and panel installation (days 2 – 7)
Underlayment goes down first, then panels run from eave to ridge with concealed fasteners on the standing-seam option. Ridge caps, valleys, and every penetration get shop-bent trim, not caulk-and-hope. On a typical Irvine ranch or two-story this is four to five working days of installation.
5. Trim, flashing and final inspection (days 7 – 10)
Ridge venting, drip edge, gutter reattachment if you’re keeping the existing gutters, and the city inspection. You walk the roof with us before we collect the final payment. The work itself carries our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Actually Choose Between
- Standing seam (the premium pick): Concealed fasteners, clean vertical lines, 40 – 70 year lifespan. Costs the most of the metal options. It reads as modern, which is why some Irvine associations approve it and some don’t. Check before you fall in love with it.
- Stone-coated steel (the HOA-friendly pick): Looks like tile or shake from the street, weighs roughly a third of a real tile roof, and is widely accepted where village guidelines want a Mediterranean or Spanish-revival look. This is the option we submit most often in Woodbridge, Northwood and Turtle Rock.
- Metal shingles: The best color and profile flexibility when your association palette is strict. Panel size matters: bigger profiles show fewer seams but cost more per square.
- Finish matters as much as profile: A factory Kynar 500 resin finish holds color far longer than a painted panel in our sun, but it adds to the per-square price. Cheaper finishes chalk and fade in 8 – 12 years, then your color no longer matches the approved submittal.
- Underlayment grade: A standard synthetic sheet versus a self-adhered high-temp membrane is a real cost difference. On a metal roof the underlayment rides under a hot surface for decades, so we push the better grade.
What Metal Roofing Costs in Irvine, CA

Expect $15,000 – $40,000 installed for a single-family home in Irvine. That’s a wide range because four things move it more than anything else:
- Roof size and complexity: A simple gable over 1,600 square feet sits near the low end. Lots of hips, valleys and dormers add labor and waste.
- Material choice: Stone-coated steel is the value option; standing seam is the premium. Same roof, meaningfully different number.
- Tear-off and deck condition: Multiple existing layers or a soft deck add to the price. We find that out at stage three, not in the bid – and if a deck surprise comes up, we quote it in writing before we touch it.
- HOA submittal and color matching: A design review packet with shop drawings and a matched-color panel order takes time and materials. We build that into the estimate rather than surprise you later.
- HOA submittal and color matching (cont.): Fasteners and trim color-matched to the panels keeps you inside community guidelines, and that costs more than generic hardware.
Your written estimate spells out square footage, panel system, finish, underlayment grade, trim, tear-off, and disposal. It doesn’t cover structural repair if we find a bad rafter once the deck is bare – that’s added only with your written approval. Upfront pricing, no surprises: the number you see is the number you pay, absent something hidden under the old roof. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months. Call (888) 255-9354 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to a Metal Roof Project
Irvine’s housing stock shapes this job. Almost everything here went up after the 1970s as master-planned tract and village development in Mediterranean and Spanish-revival stucco, much of it attached townhomes and condos in places like Woodbridge, Northwood and Turtle Rock. That means the roof itself is often straightforward, but the approvals aren’t. Village associations enforce their own color palettes and design guidelines on top of city permits, so a metal roof in Irvine requires the architectural submittal to be right the first time – the wrong panel profile or color gets kicked back, and the schedule slips. In the foothill-edge villages like Turtle Rock, Quail Hill and Orchard Hills we also size every metal roof and vent detail for ember resistance and defensible space during Santa Ana wind season, and we spec drainage for the rare intense storm our semi-arid climate brings. If your project grows into a full Roofing in Irvine scope with fascia and gutter work, we’ll fold it into the same bid.
We work across Irvine, including the 92602, 92604, 92617 and 92619 ZIP codes. If you’re planning other exterior work at the same time, homeowners often pair this with Window Replacement in Irvine or the tougher glass of Impact Windows & Doors in Irvine while the roof is open.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Metal Roofing in Irvine

Yes, in nearly every Irvine village. Your association’s architectural review committee has to approve the panel profile and color before work starts, and we prepare and submit that packet for you. Skipping it risks a violation notice and an order to change the roof at your own cost. Call (888) 255-9354 and we’ll walk through your village’s requirements.
Plan on 5 – 10 working days of install time, plus however long your association’s review takes – usually several weeks, sometimes more. The approval wait is the biggest unknown, so we start the submittal immediately after measuring. Call for a realistic timeline once we’ve seen the roof.
Usually yes. Stone-coated steel and metal shingles typically sit within the weight of the tile or shingle they replace, so the structure under your Irvine home doesn’t change. Standing seam is lighter still. The deck does get inspected, and any rot or loose sheathing is repaired before panels go down, quoted in writing first.
That’s the point of going with an approved product. We match the profile and finish to your village’s guidelines so the house stays within community standards and the metal reads as a deliberate upgrade, not an eyesore. Owners who submit a stone-coated steel panel in a tile-approved color have the easiest time getting approved.
The material carries the manufacturer’s finish and panel warranty, and the workmanship is covered by our 730-Day Done Right Promise. The underlayment and flashing details are where metal roofs fail early, so those are documented at the final walkthrough. Call (888) 255-9354 to schedule your free estimate.
Get a Free Metal Roofing Estimate in Irvine
A free on-site estimate starts with a real measure of your roof and a look at your village’s design guidelines, and ends with one written, line-item number. We answer the phone live, 24/7 – no voicemail, no waiting until Monday. The technicians who show up are background-checked and uniformed, and every project falls under our 730-Day Done Right Promise. This is part of our broader Roofing work across Irvine. Call (888) 255-9354 today to get your estimate booked.
Written by the team at Groundwork Construction Co.












