







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Yorba Linda: What They Cost and How the Job Runs
Custom and geometric windows in Yorba Linda usually run $8,000 to $25,000 for a whole-house package of shaped or made-to-order units, and $4,500 to $15,000 for a smaller set of three to six feature windows. The work takes four to eight weeks from signed contract to final inspection, because shaped units are built to order and Yorba Linda’s hillside lots add a structural step most flatland cities don’t. Call (888) 255-9354 for a free on-site estimate before you commit to a shape or a supplier.
Most calls we get here start the same way: an arched window over the entry that’s fogged and won’t open, or a set of trapezoids in a 1970s gable that no longer closes tight. The frame is fine. The glass is gone. And the original manufacturer stopped cutting that radius decades ago.
How a Custom & Geometric Window Job Actually Runs

Shaped windows aren’t a swap. They’re a small construction project with a fixed sequence, and skipping a step costs more than it saves. Here’s what the calendar looks like.
Stage 1: Measure and template (day 1, about 2 hours)
We laser-measure every opening and, for arches and angles, cut a physical template of the radius or the raked head. You’ll decide then whether the new units match the original profile or clean it up. This is also where we flag rot in the rough opening, because a soft header changes the whole plan.
Stage 2: Structural review (days 2 to 10)
On hillside lots off Imperial Highway and Yorba Linda Boulevard, shaped windows often sit in gable walls that carry real load. We check the header and framing before ordering anything. If the opening needs a new beam, that’s a conversation now, not after the glass arrives. You approve the approach and the added cost here.
Stage 3: Order and fabrication (weeks 2 to 6)
This is the long pole. Standard rectangles ship in two to three weeks. Arches, half-rounds, trapezoids and custom-color units take four to six weeks from a maker like Andersen or Marvin, longer if you want a matched historic profile. You’ll lock in glass package, finish color and grid pattern at order time; changes after this point mean a re-order and another month.
Stage 4: Demo and install (days 1 to 3 of the install window)
We protect the interior, pull the old units, and inspect the rough framing for water damage and pest entry. New units get flashed, shimmed and sealed with a proper drainage plane. Most homes are watertight by the end of day one and buttoned up by day three.
Stage 5: Trim, inspection and walkthrough (days 4 to 7)
Interior trim, exterior caulk, stucco patching and paint. Then the city inspection, which on a Yorba Linda hillside job may include the structural review alongside the window permit. We walk the job with you before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Every custom and geometric window job comes down to four decisions. Here’s the honest trade-off on each.
- Frame material. Vinyl is the value play and holds up fine in Yorba Linda’s dry heat, but it can’t hold a tight radius on small arches. Wood-clad aluminum gives you crisp shapes and a real wood interior, at roughly 30 to 50 percent more. Fiberglass sits in between and takes paint well.
- Glass package. Double-pane low-E with argon is the baseline here; our summers push heat gain, so we spec a solar-control coating on any west- or south-facing shaped unit. Triple-pane rarely pays back on this climate.
- Shape and profile. True divided lites versus simulated dividers inside the glass. True dividers look right on a period home and cost more; simulated dividers are cheaper and easier to clean. Half-rounds, eyebrows and quarter-arches each carry their own upcharge.
- Finish and grid. Custom exterior colors and interior stains add lead time and cost. Standard colors ship faster. If your home has James Hardie siding, we match the window trim to it so the exterior reads as one system.
What Custom & Geometric Windows Cost in Yorba Linda, CA

Plan on $8,000 to $25,000 for a full package of custom and geometric windows in Yorba Linda, or $4,500 to $15,000 for a focused set of feature windows. Five variables push a job toward one end or the other:
- Count and shape complexity. Each arch or trapezoid costs more to fabricate than a rectangle of the same size, and odd shapes carry a minimum order.
- Rough-opening condition. Rot, failed flashing or a header that needs sistering adds framing labor and material. Dry, solid framing keeps you at the low end.
- Structural work. Hillside gable walls that need a new beam or post move a job up fast. That’s a framing line item, not a window line item.
- Glass and finish grade. Solar-control low-E, true divided lites and custom colors stack up per unit.
- Permit scope. A window-only permit is one fee; structural review on a Yorba Linda slope adds engineering time.
A written estimate from us is line-item: each opening, each unit, framing, trim, permit and haul-away, with the number you see being the number you pay. What it typically doesn’t include is drywall repair beyond the immediate opening, or repainting a whole room. We tell you that up front so it’s not a surprise.
See the difference
Before
After
Before
After
Before
AfterWhat Yorba Linda Homes Specifically Do to This Job
Yorba Linda’s housing stock splits into two eras, and each one treats geometric windows differently. The 1960s to 1980s tract homes, many with original stucco and wood-frame construction, often have arches and gable shapes cut into openings that were built fast and framed light. We see water intrusion behind the original flashing on a lot of these, especially on the uphill side of the house where runoff collects. The hillside streets off Imperial Highway and Yorba Linda Boulevard add a wrinkle: shaped windows in sloped gable walls sometimes need a structural review before the city will sign off, and steep lots can mean scaffolding or a lift for exterior trim. Winter rain here falls in a few intense storms rather than spread out, so a leaking arch shows its damage all at once. If a shaped window has been leaking into the wall, we’ll look at the drainage and grading around it too, which is why homeowners often pair this with Concrete Driveways & Concrete Work in Yorba Linda to move water away from the wall.
Serving Yorba Linda, CA – Our Local Coverage Area
We serve Yorba Linda and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in Yorba Linda

Four to eight weeks from contract to final inspection, with the install itself taking one to three days. The longest phase is fabrication, since shaped units are built to order and can take four to six weeks. Call (888) 255-9354 for a timeline on your specific openings.
Yes. Window replacement requires a permit here, and shaped windows in a gable or load-bearing wall may trigger a structural review as well. We pull the permit and handle inspection. On slope lots, expect the city to look at the framing, not just the glass.
Often yes, if the rough opening matches and the header is sound. It changes when the framing is rotted or the wall needs a beam to hold a larger shape. We check this in the first two weeks, before you’re committed to a custom order.
Whole-house packages run $8,000 to $25,000, and a smaller feature set runs $4,500 to $15,000. Shape complexity, framing condition and glass grade move the number most. Call (888) 255-9354 for a line-item quote.
Every job is backed by our 730-Day Done Right Promise; if it’s not done right, we make it right. The window units carry their own manufacturer warranty, and we explain both before you sign. Call (888) 255-9354 with any warranty question.
Get a Free Estimate on Custom & Geometric Windows in Yorba Linda
Call (888) 255-9354 for a free on-site estimate on custom and geometric windows in Yorba Linda. A live person answers, day or night. We measure the openings, flag any framing concerns, and hand you a written line-item quote with financing available at 0% for 18 months. Pair it with Asphalt Driveways & Resurfacing in Yorba Linda if you’re reworking the approach too. See the full scope on our Windows & Doors in Yorba Linda page and our Windows & Doors hub, and check where we work across Yorba Linda.
Written by the team at Groundwork Construction Co.












