







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Yorba Linda, CA: what they cost and how long they take
A sliding or patio door replacement in Yorba Linda typically runs $2,800 to $9,500 per opening, and most single-door swaps finish in one to two days once the unit is on site. The number depends on size, frame material, whether we’re cutting a new opening or reusing an existing one, and how much rot we find at the sill. Call (888) 255-9354 and we’ll set a free on-site estimate, measure the rough opening, and put the range in writing before anyone touches the wall.
How the job actually runs, stage by stage

Sliding and patio door work is more sequencing than most homeowners expect, especially on the older Yorba Linda tracts where the original frame has been sitting in stucco since the 1970s. Here’s the real order of operations.
Day 1, morning: measure, order, confirm
We template the opening and check the header, sill and side jambs for square and rot. This is where you decide the big-ticket items: panel configuration, glass package, frame material and finish. Lead time on a made-to-order unit runs 3 to 6 weeks, so this decision is what actually sets your calendar, not the install.
Day 1, afternoon: demo and prep
The old door comes out, along with any failing flashing and sill pan. We open the wall enough to inspect the header and framing, because a sagging header behind a sticky slider is a structural conversation, not a trim problem. You’ll see photos of whatever we find before we price the fix.
Day 2: set, flash and seal
New unit goes in level and plumb, sill pan gets flashed, and we seal the exterior with the right backing and sealant for stucco. This is the step that decides whether the door leaks in five years, so it gets the time it needs. Most jobs are watertight by end of day.
Day 2 or 3: finish and adjust
Interior trim, exterior patch, rollers adjusted, screen hung. You’ll roll the door yourself before we leave, because a slider that doesn’t glide one-handed isn’t finished.
Final walkthrough
We go through operation, lock hardware, weep holes and drainage, and hand over the paperwork. Everything we install carries the 730-Day Done Right Promise, so if a roller fails or a seal lifts, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the price spread on a patio door comes down to four decisions. Here’s the honest version of each.
- Vinyl frame – the value pick, $2,800 – $5,500 installed. Good thermal performance, resists moisture, limited colors. Right for a rear slider facing the yard.
- Fiberglass frame – $4,500 – $7,500. Holds up better than vinyl in direct sun and won’t warp. Andersen makes solid fiberglass units if you want a name you recognize.
- Aluminum frame – $4,000 – $8,000. Slimmer sightlines, modern look, better for large glass spans. Needs a thermal break or it runs cold.
- Wood-clad – $6,500 – $9,500 and up. The premium option, real wood inside with a weatherproof exterior. Beautiful, needs occasional care.
- Glass package – standard dual-pane is fine; low-E and tempered glass add cost but matter on west-facing doors that bake in summer.
- Configuration – a standard two-panel slider is cheapest. Multi-panel, corner, or pocketing doors jump the number fast because they change the header and framing.
We stock and install units from a curated brand list, and we’ll tell you plainly when a cheaper frame does the job just as well.
What Sliding & Patio Doors costs in Yorba Linda, CA

Plan on $2,800 – $9,500 for a standard replacement, and $6,000 – $14,000 if we’re cutting a new opening, adding a header, or converting a window to a door. Here’s what actually moves the number:
- Size and panel count – an 8-foot two-panel slider is the baseline; a 12-foot multi-panel system roughly doubles material cost.
- Existing condition – rot at the sill or a failing header adds framing and stucco repair, often $500 – $2,000.
- New opening vs. replacement – reusing an existing rough opening saves the framing and exterior patch; a new cut adds both, plus a permit.
- Glass and finish – low-E, tempered, obscure or decorative glass adds $300 – $1,200 per unit.
- Permit and inspection scope – a straight like-for-like swap may not need one; a new opening or structural change does, and that adds time and fees.
A written estimate from us lists the unit, hardware, flashing, sealant, labor, disposal and permit separately, so you can see exactly where the money goes. What it won’t include is surprise change orders. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Yorba Linda homes specifically do to this job
Yorba Linda’s hillside lots change how we approach a patio door. On the streets off Imperial Highway and Yorba Linda Boulevard, many homes sit on sloped ground where the rear door opens onto a deck or a grade that drops away, and that slope means water management matters more than it does on flat ground elsewhere in Orange County. The 2008 Freeway Complex fire and its burn scars still affect how the hills shed water in a hard winter storm, and a poorly flashed patio door on a hillside is exactly where that water finds its way in.
Most of the housing stock we work on is 1960s – 1980s tract construction with original stucco and wood framing, plus newer custom homes on the hillside estates. On the older tracts, the patio door has usually been in place since the original build, the rollers are shot, and the sill has quietly been taking water for years. That’s the failure mode we see most. If your door is part of a larger upgrade, we handle it as part of a full Windows & Doors in Yorba Linda project, and holes left after panel removal are worth thinking about alongside Fence Repair in Yorba Linda and Paver Driveways in Yorba Linda if the yard is getting redone at the same time.
Serving Yorba Linda, CA – Our Local Coverage Area
We serve Yorba Linda and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Sliding & Patio Doors in Yorba Linda

Most single-door replacements finish in one to two days of on-site work. The real timeline is the 3 to 6 week lead time on a made-to-order unit, so if you’re planning around a season or a sale, order early. Call (888) 255-9354 for a scheduling estimate.
A like-for-like replacement in the same opening usually doesn’t require one; a new opening, a structural header change, or an energy-related alteration does. We pull the permit and handle the inspection when the scope calls for it. Call us and we’ll tell you which one your job is.
Yes, in most cases. If we’re reusing the existing rough opening, the job is a direct swap with no plumbing or structural work. Only when the new unit is a different size or the header is failing does the scope change, and we’ll show you what we found before pricing it.
Replacement runs $2,800 – $9,500, with new openings and multi-panel systems pushing toward $14,000. The price depends on size, frame material, glass package and existing condition. Call (888) 255-9354 for an exact quote; estimates are free.
Every patio door we install is covered by our 730-Day Done Right Promise. If a roller, seal, or hardware piece fails within that window, we come back and fix it. Call (888) 255-9354 to get started on your Windows & Doors project in Yorba Linda.
Get a free sliding door estimate
Call (888) 255-9354 to schedule a free on-site estimate for Sliding & Patio Doors in Yorba Linda. We measure the opening, check the sill and header, and leave you with a written range covering unit, labor, flashing and permit. A live person answers, and our technicians are background-checked and arrive in uniform with up to 12 years of experience. No pressure, no surprise numbers.
Written by the team at Groundwork Construction Co.












