







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Yorba Linda Owner’s Guide
We install and service Jerith-compatible driveway and paver systems throughout Yorba Linda. A paver driveway in Yorba Linda typically runs $7,000 – $18,000 installed, and most individual part and section repairs are done in a single visit. You usually discover the failure the same way everyone does: a paver rocks underfoot when you walk to the mailbox, water pools against the garage slab after a rain, or the edge course along the street starts spreading and kicking loose.
Yorba Linda sits on clay-heavy soil that swells in the wet months and shrinks hard in summer, and that cycle works on every joint and edge restraint in the driveway. When a Jerith system starts moving, it’s rarely the paver face itself. It’s the base, the bedding layer, the edge restraint or the polymeric joint sand that gave out first.
Which Jerith Models This Applies To

Jerith builds its driveway and paver lines in running-bond and herringbone formats, plus edge course pieces, corner pavers and matching caps for retaining and seat walls. Most Yorba Linda lots use standard 60mm pavers for drives and 80mm where a vehicle apron or heavy turn radius sits over the garage approach. Before you order anything, measure the actual paved field and note the coursing pattern. A herringbone field needs different piece counts and cuts than running bond, and ordering the wrong format is the most common and most expensive mistake we see.
Identification matters more than people expect. Jerith stamps and labels vary by production run, so the model tag on the original invoice or builder packet is worth more than any photo sent to a supplier. If the tag is gone, we measure thickness, face dimensions and color lot together. Color lot is the compatibility gotcha: Jerith pavers from a different production run can be a shade off even in the same named color, so blending new pieces into an existing Yorba Linda driveway means matching the lot, not just the color name. We’re an independent provider and not affiliated with Jerith, which means we source OEM-matched parts and quality equivalents side by side and tell you plainly which is which. OEM is the safer match for color and dimensional fit. Quality aftermarket equivalents can work well for base, restraint and joint sand, where brand rarely changes performance.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Is Failing
- Pavers rocking or dipping underfoot. The bedding sand has washed out or the base compacted unevenly, usually after a wet season. A rocking paver is a base problem wearing a paver costume.
- Joint sand eroding and weeds pushing through. Polymeric sand has broken down or was never fully set, and water is now running through open joints into the base instead of off the surface.
- Edge course spreading at the street or driveway apron. Edge restraint has shifted or the spikes pulled, so the field has nothing holding it against lateral load. This one gets worse fast once a car turns over it.
- Pooling water against the garage slab or along the house wall. The slope has settled out of the driveway, and standing water against the slab is the failure you actually want to fix before it reaches the foundation.
- Cracked, chipped or spalled paver faces. Often vehicle load on a thin 60mm paver over a soft spot, or a freeze-thaw and sun cycle that found a weak piece. Individual replacement is straightforward if the base under it is sound.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work costs in Yorba Linda, with parts and labor folded into the number:
| Work | Installed Range |
|---|---|
| Paver driveway installation (new) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
A localized repair (lift, re-base and reset a section, replace broken pieces, restrike the edge) sits at the low end of those ranges because you’re paying for labor and matching pieces, not a full field. What drives the range: square footage, whether the base has to come out, color-lot matching on replacement pavers, edge restraint replacement and how much cutting a herringbone field demands. We quote upfront and in writing, so the number you see is the number you pay, and every install and repair is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself. Walk the driveway and note which pavers rock, hose it down and watch where water actually goes, and pull up the model tag or original invoice if you still have it. Those details make the estimate faster and more accurate.
Where DIY goes wrong on pavers is the base. Resetting a surface paver without fixing compaction or drainage puts the same failure back in your driveway within a season, and edge restraint and slope correction are hard to get right without the right plate compactor and a laser level. Those are the steps that decide whether the repair lasts. For anything beyond a single loose paver, call us at (888) 255-9354 and we’ll come out, look at the base and give you a straight answer on repair versus replacement.
FAQs

How long do Jerith driveway pavers last in Yorba Linda? The paver itself should hold up for decades, but the system around it fails first. In Yorba Linda’s clay soil, expect base settling and joint sand breakdown to show up within a handful of years if drainage wasn’t handled right at install. A well-built base is what decides the lifespan, not the paver face. Call (888) 255-9354 for a free assessment of your driveway’s base and drainage.
Can you repair my Jerith driveway instead of replacing it? Often, yes. Loose or broken pavers, failed edge restraint and eroded joints can be lifted, re-based and reset without tearing out the whole field, which costs far less than a full replacement. If more than roughly a third of the field is moving, replacement usually makes more financial sense. Call (888) 255-9354 and we’ll tell you which side of that line you’re on.
How long does the repair or swap take? A localized repair is typically done in a single visit, and larger sections may run two. Full driveway installs run several days depending on square footage and base work. We give you a realistic timeline in the written quote, not a guess. Call (888) 255-9354 to schedule your free estimate.
How do you source the Jerith parts? We start with the model tag or invoice to match the format, thickness and color lot, then source OEM-matched pieces where color and fit matter and quality equivalents for base, restraint and joint sand. We’re independent from Jerith, so we’re free to tell you when the aftermarket part is the smarter buy. Call (888) 255-9354 to get your part matched.
When you’re ready to stop guessing about your driveway, call Groundwork Construction Co. of Yorba Linda at (888) 255-9354 for a free estimate and design consult. We answer with a live person around the clock, our technicians arrive background-checked and in uniform, and every job is covered by our 730-Day Done Right Promise. Beyond Jerith, we also work with KraftMaid, Cambria and Silestone across our other trades, and our current offers include $1,000 off projects over $10,000 and 0% financing for 18 months. Upfront pricing, no surprises, from foundation to finish line.
Written by the team at Groundwork Construction Co. of Yorba Linda, serving Yorba Linda and nearby areas.












