







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Windows & Doors: The Yorba Linda Owner’s Guide
We install Tamko-compatible windows and doors for Yorba Linda homeowners, with typical installed window projects running $4,500 – $15,000 and impact-rated retrofits at $8,000 – $25,000 depending on count and glass package. Most owners call us after one of two moments: a door that suddenly won’t latch square, or a window that fogs between the panes after a summer of Yorba Linda heat and a winter of Santa Ana winds. Groundwork Construction Co. of Yorba Linda is an independent service provider, not affiliated with Tamko, and we’ll tell you plainly whether your unit needs a part or a full replacement.
Which Tamko Models This Applies To

Tamko’s window and door line has shifted over the decades, and that matters when you’re matching a part. Earlier aluminum and vinyl series used different sash balances, weatherstrip profiles and hinge sets than the models built after the company consolidated its residential lines. If your unit has no readable label, we identify it by three measurements: the rough opening, the visible glass size, and the depth of the frame pocket where the balance or hinge sits. That depth is where most DIY parts orders go wrong, because a quarter inch of variance means a replacement sash won’t seat.
On the OEM-versus-aftermarket question, our answer depends on the part. Hinges, locks, sweeps and weatherstrip have solid aftermarket equivalents at half the cost, and we use them without hesitation. Sash balances and insulated glass units are a different story. Aftermarket balances frequently miss the weight rating for older Tamko sashes, and a mismatched IGU loses its seal faster than an OEM unit in Yorba Linda’s temperature swings. We price both paths so you can see the trade-off in writing before anything is ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Windows & Doors Is Failing
- Fogging or condensation between the panes. The seal on the insulated glass unit has failed, letting moisture into the gap. This is not a cleaning problem, and no amount of wiping will fix it.
- A door that drags or won’t latch. Usually a worn hinge or a frame that has shifted with seasonal soil movement, which is common on Yorba Linda hillside lots. The door itself is often fine; the hardware and alignment aren’t.
- Drafts along the edges. Weatherstrip compresses and hardens over time, especially after repeated sun exposure on south and west-facing units. A dollar-bill test around the perimeter will show you where it’s given up.
- A sash that won’t stay up. The balance has lost tension or the cord has snapped. This is a spring-loaded assembly under tension and is not a part to open up casually.
- Sticking, grinding or a loose handle. Worn lock mechanisms, rollers or hinge pins. Small parts, but a failed lock on an exterior door is a security issue, not just an annoyance.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Yorba Linda, window replacement runs $4,500 – $15,000 installed, and impact window installation runs $8,000 – $25,000. The range is driven by unit count, frame material, glass package and whether we’re working with existing openings or reframing. Door hardware and weatherstrip repairs sit well below those figures because they’re parts-and-labor jobs, not full swaps.
Every quote is line-itemed: part, labor, disposal, and any trim or finish work. You see the number before we start, and it doesn’t move once work begins. All of it is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself. Run a hand along the weatherstrip to feel for gaps, test the dollar-bill drag around a closed door, and look at the glass for haze between panes. Note the measurements and any label text you can read.
Where DIY goes wrong: sash balances are under spring tension and can snap back with real force, and replacing an insulated glass unit requires setting it square or the new seal fails early. We’d rather you not take that on. Call (888) 255-9354 and we’ll help you identify the part and give you an honest read on repair versus replace.
FAQs

Expect 15 – 25 years for the frame and glass on a well-maintained unit, with hardware and weatherstrip needing attention sooner. Yorba Linda’s hot, dry summers and windy winters are hard on seals and weatherstrip, so those parts often fail before the window itself does. Call (888) 255-9354 for an assessment.
Often, yes. Hinges, locks, sweeps, weatherstrip and sash balances are all repairable without a full replacement. Fogged glass units can usually be swapped as an IGU rather than a whole window. Call (888) 255-9354 and we’ll tell you which path makes sense.
Most hardware and weatherstrip swaps are done in a single visit, typically a couple of hours. An insulated glass unit replacement takes longer because the unit has to be ordered to spec. We’ll give you a realistic timeline with the quote.
We match parts to your unit’s series, measurements and frame pocket depth, then order from suppliers who carry the correct profile. We don’t claim to stock parts or carry them on a truck. You get the right part for your specific Tamko unit, priced honestly up front.
We also work with KraftMaid, Cambria and Silestone on the interior side of the same homes, so if a window project turns into a bigger remodel, you’re not starting over with a new contractor. From foundation to finish line, one team handles it. Call (888) 255-9354 to schedule your free estimate. Calls are answered by a live person 24/7, pricing is upfront with no surprises, and every project is backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Yorba Linda, serving Yorba Linda and nearby areas.












