







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Bathroom Remodeling: The Yorba Linda Owner’s Guide
Bathroom remodeling with Tamko materials in Yorba Linda typically runs $9,000 – $28,000 installed, and most jobs book within a week of your written estimate, not a single day. Tamko is best known for roofing, so when a Yorba Linda homeowner asks about “Tamko bathroom remodeling,” what they usually mean is a remodel where the moisture barrier, underlayment or waterproofing membrane behind the tile is a Tamko-brand product. Owners discover the problem the same way every time: a soft spot near the shower curb, tile that sounds hollow when tapped, or a faint musty smell in a guest bath that only gets used a few times a year.
We’re Groundwork Construction Co. of Yorba Linda, and we’re an independent contractor, not affiliated with Tamko. We install and repair work that uses Tamko-compatible materials, and we’ll tell you honestly whether you need a full remodel or a targeted repair.
Key Takeaways
- Tamko bathroom work in Yorba Linda runs $9,000 – $28,000 installed for a full remodel.
- The failure point is almost always the waterproofing layer under the tile, not the tile itself.
- We don’t carry parts on a truck or keep local stock. Materials get specified, quoted and ordered per job.
- Every project is backed by our 730-Day Done Right Promise.
Which Tamko Models This Applies To

Tamko’s roster of products that turn up in bathroom construction is narrower than people expect. The name shows up most often on underlayments, moisture barriers and self-adhered membranes (Tamko’s peel-and-stick and rolled waterproofing lines), and occasionally on roofing-adjacent materials that a previous contractor repurposed. It is not a tile brand, a vanity brand or a fixture brand. If you’re holding a label that says “Tamko” and it starts with a product code rather than a model name, that’s normal. Tamko codes are batch- and product-specific, not consumer-friendly.
To identify what you’re working with, look for three things: the full product name printed on the label or roll edge (not just “Tamko”), the printed square-footage or width spec, and any UL or ASTM rating code. Snap a photo of the whole label before it gets wet or torn. Those three data points are what an installer needs to match a compatible replacement membrane, because substituting an unrated peel-and-stick from a big-box shelf is where moisture problems begin.
The OEM-versus-aftermarket question has a Tamko-specific twist. Because Tamko’s bathroom-side catalog is limited, most Yorba Linda jobs use Tamko material where it genuinely belongs (the waterproofing layer) and equivalent-rated products from other listed brands elsewhere. On the fixture and cabinet side, we frequently work with KraftMaid, Cambria and Silestone, which are separate product lines and not Tamko products. We won’t tell you an aftermarket piece is OEM when it isn’t. The quote names every brand and every spec.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Bathroom Remodeling Is Failing
Waterproofing failures announce themselves long before they become structural. These are the five symptoms we see most in Yorba Linda bathrooms:
- Hollow-sounding tile. Tap the shower wall with a screwdriver handle. A hollow report means the thinset has debonded, usually because moisture got behind the tile and the membrane below has already failed.
- Soft or spongy floor near the shower or tub. This is subfloor rot, and it means water has been bypassing the waterproofing for months. The longer it runs, the more of the floor structure gets replaced.
- Musty odor in a rarely used bath. A persistent smell that doesn’t clear with ventilation points to trapped moisture behind a wall or under a curb. In Yorba Linda’s dry, warm climate, the surface dries fast, which hides the problem and lets it grow quietly.
- Efflorescence or crust lines on grout. White mineral bloom on grout is water pushing salts to the surface. It’s a reliable sign the membrane isn’t doing its job.
- Visible lifting or bubbling at the membrane edge. If you can see the waterproofing layer peeling at a corner or curb, it lost adhesion. This one gets worse on its own and doesn’t self-correct.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the range for a Tamko-compatible bathroom remodel in Yorba Linda, with what moves the price:
| Line Item | Installed Range (Yorba Linda) |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: which waterproofing system gets used, whether the subfloor needs replacing, tile size and layout complexity, and whether you’re keeping the existing footprint. Parts and labor are quoted as separate line items, so you can see exactly what the membrane, tile and fixtures cost versus the install labor. The number you see is the number you pay, and every job carries our 730-Day Done Right Promise. Permits, when required, are pulled and inspections are scheduled as part of the job.
DIY or Call Us?
There’s a short list of things a homeowner can safely check: tap the tile, look at the label on any membrane you can see, photograph the product codes, and test the floor for softness with a hand. Stop there.
Waterproofing a shower or tub surround is not a cosmetic task. The membrane has to be lapped in the right direction, sealed at every corner and penetration, and tied correctly into the drain and curb. Get one of those wrong and the leak runs silently behind the wall for a year or more. Tile work over a bad membrane looks fine on day one and fails by year three. Removing tile and substrate also means cutting into framing and getting near plumbing and electrical, which is work for a trained professional, not a Saturday project.
If you’re unsure whether your Tamko material has failed, call us at (888) 255-9354. We’ll tell you straight what’s happening and whether it’s a repair or a remodel.
FAQs

A properly installed, correctly lapped membrane typically lasts 15 to 30 years before it needs replacement. In Yorba Linda’s climate the surface dries quickly, which helps the top layer but can hide underlying failure, so it pays to check the signs above every few years.
Sometimes, yes. A small, isolated patch on an accessible wall can be repaired if the rest of the membrane is sound and the drain connection is intact. If the failure is at the curb, the drain or under the floor tile, the honest answer is replacement, because patching over a failed system just delays the next leak. Call (888) 255-9354 and we’ll assess it before recommending either route.
A shower membrane replacement runs one to three days, and a full bathroom remodel runs one to three weeks depending on scope, tile work and whether permits are involved. We give you the schedule with your written quote so you’re not guessing.
We identify the product from your label, codes and measurements, then order the correct-rated membrane or material from a verified supplier for your specific job. We don’t carry parts on a truck or keep local inventory; each order is specified to your install, which is why the quote lists exact brands and specs.
When your Tamko-compatible bathroom remodel needs a real answer, call (888) 255-9354 for a free estimate with Groundwork Construction Co. of Yorba Linda. Live person, 24/7. Upfront pricing, no surprises. And with $1,000 off projects over $10,000 plus 0% financing for 18 months, the work is easier to move forward than you’d expect.
Written by the team at Groundwork Construction Co. of Yorba Linda, serving Yorba Linda and nearby areas.












