







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The Yorba Linda Owner’s Guide
Sterling-compatible driveway and paver work in Yorba Linda typically runs $7,000 – $18,000 installed for a paver driveway, or $250 – $700 for a reseal and re-sand on an existing surface, and we can usually match the material and get a crew scheduled within the same week. Owners rarely discover a Sterling driveway problem as a single failure. It shows up as a paver that rocks underfoot in the morning, sand washing out toward the storm drain after the first winter rain, or a hairline joint crack that widens every summer. By the time you’re searching for a replacement part, the pattern has usually been building for two or three seasons.
- We install and repair Sterling-compatible driveway and paver systems. We’re an independent service provider and not affiliated with Sterling, so we match their profiles, colors, and joint specs against what’s actually on your driveway.
- Paver driveway installation: $7,000 – $18,000
- Driveway replacement: $5,000 – $14,000
- Concrete driveway installation: $4,500 – $12,000
- Driveway sealing: $250 – $700
Which Sterling Models This Applies To

Sterling paver and driveway product lines share dimensional and color families, but they are not universal. What matters for a proper match is the profile name and finish, not the year your home was built. Pull a single loose paver from a corner or edge, flip it, and look for the mold stamp on the back or an impressed mark along the side. Pair that with a tape measure: face dimensions, thickness (a 60mm paver will not sit flush against a 40mm or 80mm bed without correcting the base), and the joint width your existing pavers were laid at.
That last detail trips up more Yorba Linda owners than anything else. A replacement paver of the right color but the wrong thickness forces you to either shim the base or accept a rock. On a Sterling driveway, a paver that rocks moves slightly every rain and pumps the bedding sand out from underneath until the whole panel sags.
On the OEM-versus-aftermarket call: for a color-matched finish on a visible drive, an exact Sterling replacement profile is worth chasing. For a base or edge course that will never be seen, or for a joint sand refill after winter, a high-quality compatible blend does the job and saves real money. We’ll tell you which is which on the estimate, and we walk through the tradeoffs instead of pushing you one way. We also service parts and materials from KraftMaid, Cambria, and Silestone on the interior side if you’re planning a coordinated project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
- Pavers that rock or “click” underfoot. The bedding sand has migrated out and the paver is bridging on the base. Left alone, that flexing cracks the paver at the joint and spreads to the next course.
- Sand washing out in joints after rain. This is the most common Yorba Linda symptom. Our clay-heavy soils drain slowly when saturated, and irrigation overspray or a downspout dumping at the drive edge accelerates the loss.
- Joint lines widening toward a low corner. Once a paver edge lifts, the joint opens and takes more water on the next rain. It’s a feedback loop.
- Lippage: a paver sitting higher than its neighbor. Usually the base underneath has settled or a tree root has pushed up. Pounding the paver back down without fixing the cause puts it right back out of level.
- Efflorescence (white haze) that won’t wash away. Moisture pushing through the paver and drying out through the face leaves salts behind. Recurring haze points to a drainage problem under the surface, not a dirty driveway.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Yorba Linda, here’s roughly what each fix runs, and what the number actually buys:
- Driveway sealing: $250 – $700. Cleans, re-sands joints, rolls on sealer. Best for a driveway that’s still tight but grimy.
- Driveway replacement: $5,000 – $14,000. Full tear-out, base correction, re-lay. This is what you buy when the rocking isn’t a single paver.
- Paver driveway installation: $7,000 – $18,000. New drive, engineered base, paver lay, joint sand, sealing.
- Concrete driveway installation: $4,500 – $12,000. A solid, simpler-surface option if you’re comparing.
What drives the range: total square footage, base depth (Yorba Linda’s expansive clay can require a deeper base and stronger geotextile than a standard install), curb, drainage, and how much of the existing surface is salvageable. We quote line by line, no change orders, and every job is backed by our 730-Day Done Right Promise. The number you see is the number you pay.
DIY or Call Us?
Here’s the honest split. You can safely pull a loose paver, read the mold stamp, measure thickness and face dimensions, chase a downspout to see where water drains, and note which joints are opening. That’s real information and it helps the estimate.
The line is the base and re-lay. A paver repaired over a soft or expansive base comes apart in one or two rainy seasons, and you’re back where you started with less money to spend. We’ve watched enough DIY re-sands fail in the first winter rain to say it plainly: pull the part number, then let a crew do the work. Our technicians have up to 12 years of experience and arrive background-checked and in uniform. Calls are answered by a live person 24/7, so you never leave a voicemail at 9 p.m.
Call (888) 255-9354 to schedule your free estimate.
FAQs

A well-installed Sterling paver should hold 25 – 30 years before normal wear. The failure you’re seeing is almost never the paver itself. It’s what’s underneath it. Yorba Linda sits on clay soils that swell and shrink with the seasons, so a shallow base or a failed drainage path will shorten a driveway’s working life long before the surface is done.
Often yes. A single rocking paver, a washed-out joint line, or a low corner can usually be lifted, the base corrected, and the paver re-set for a fraction of a full replacement. If three or more pavers in a panel are rocking or cracking, we’ll typically recommend resetting that whole section, because the base under all of them is compromised. We’ll tell you which it is on the estimate. Call (888) 255-9354 for an exact quote.
A single-paver swap or joint re-sand can be done in a single visit. A section reset usually runs a day to two. A full driveway replacement takes several days to a week, mostly base work and curing time before we seal. Weather in Yorba Linda affects the seal coat, so we don’t seal on a wet or cold day. Call (888) 255-9354 for an estimate and a realistic start date.
We start from the mold stamp on your existing paver, the face dimensions, the thickness, and the joint width, then match those against available Sterling-compatible supply. We don’t stock parts and we don’t carry pavers on a truck, so every match is confirmed before it’s ordered. If a perfect match isn’t available, we’ll show you the nearest compatible option and explain the difference. Call (888) 255-9354 to start the free estimate.
From foundation to finish line, Groundwork Construction Co. of Yorba Linda handles the full driveway scope. Our upfront pricing, $1,000 off projects over $10,000, and 0% financing for 18 months make a proper paver job accessible without shortcuts. Call (888) 255-9354 for a free estimate today.
Written by the team at Groundwork Construction Co. of Yorba Linda, serving Yorba Linda and nearby areas.












