







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Driveway & Pavers: The Yorba Linda Owner’s Guide
Silestone paver and driveway work in Yorba Linda typically runs $7,000 to $18,000 installed for a paver driveway, and $3,500 to $11,000 for a paver patio, depending on square footage, base prep, and how much of the existing surface can be saved. We’re an independent service provider, not affiliated with Silestone, and we install and repair to the manufacturer’s spec so the system performs the way it was engineered to. Most Yorba Linda owners find out something’s wrong the same way: a paver lifts after a rain, one corner of the driveway settles where the car parks, or the joints start shedding sand faster than they used to.
Silestone engineered quartz pavers behave differently from natural stone and from concrete. They hold color and resist staining well, but they’re unforgiving about base prep and drainage. When the substrate moves, the surface tells you quickly.
Key Takeaways
- Paver driveway installation in Yorba Linda: $7,000 – $18,000 installed.
- Paver patio installation: $3,500 – $11,000 installed.
- Driveway sealing and joint re-sanding: $250 – $700.
- All work is backed by our 730-Day Done Right Promise.
- Calls answered by a live person 24/7 at (888) 255-9354.
Which Silestone Models This Applies To

Silestone engineered surfaces come in a range of collections, and the paver-facing part of the system is where most compatibility questions land: the base course, the setting bed, the joint sand, and the edge restraint. Getting the right one depends on what’s actually installed.
Start by identifying the paver line and thickness. Measure a single paver’s face dimensions and depth with a tape (common thicknesses sit around 3/4 inch to 1-1/4 inch, though you should confirm against the manufacturer’s literature for your specific line). Look for a stamp, etch, or label on the back or edge of a lifted paver, and photograph the color and finish in daylight before you try to match it. That photo and the label are what most counter and showroom staff need to pull the right spec.
On the OEM-vs-aftermarket question, Silestone is a manufactured product with a defined color and finish palette, so blending in a non-brand paver next to existing Silestone usually shows. A quality aftermarket base aggregate or polymeric joint sand is a different story and can work fine when it matches the spec. But mixing brands of surface paver is where Yorba Linda jobs go sideways. We source the correct Silestone-compatible material through manufacturer-authorized distribution, then set it to the specified base depth and slope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Driveway & Pavers Is Failing
- Pavers lifting or rocking underfoot. Usually a base that wasn’t compacted in lifts, or water getting under an edge. Once a paver rocks, the sand beneath it is already gone.
- Sunken areas where the car parks or the driveway meets the street. Point loads on an under-thick base or a failed subgrade. This is common on Yorba Linda driveways that sit on fill or clay-heavy soil.
- Joint sand washing out faster than it should. Missing sand lets water in at the surface, which then attacks the base. Re-sanding buys time, but only if the base is sound.
- Efflorescence or white haze that keeps coming back. Moisture moving through the system, often from poor drainage or a slope that sheds water toward the house instead of away.
- Color fading or chalking on the sun-facing run. Silestone holds up well to Yorba Linda’s UV load, but a dull surface usually points to surface wear or the wrong sealer rather than the material itself.
One reality worth naming: a paver system on a properly built base should hold up for decades, not seasons. If yours is failing in the first several years, the base and drainage are the usual culprits, not the paver.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Yorba Linda owners can expect. These are installed ranges, so material, base, labor, and cleanup are inside the number.
| Service | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What drives the range: square footage, excavation and haul-off, base depth, edge restraints, drainage corrections, and how much of the existing surface can be reused. A simple re-sand and seal sits at the low end. A full driveway replacement with a rebuilt base and a new edge restraint sits at the top.
We quote parts and labor as line items, so you see exactly what each piece costs. Upfront pricing means the number you see is the number you pay. All of it is covered by our 730-Day Done Right Promise, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000.
DIY or Call Us?
A few things you can check safely: shoot photos of the failing area, measure lifted or sunken sections, note where water pools after rain, and lift one loose paver (by hand, no pry bars on the finish) to get the back label. That information is genuinely useful and we’ll take it.
Where DIY goes wrong is the base and the reset. Dropping sand under a rocking paver and calling it fixed lasts a season. Cutting out and rebuilding the base correctly means excavation to depth, compacting in lifts, setting slope so water leaves the driveway, and locking the edges. Get one of those wrong and the whole system fails again, often faster than the first time. None of this is dangerous work the way a garage spring is, but it is heavy and it punishes shortcuts.
We handle the whole scope, from foundation to finish line. If you’re not sure whether it’s a re-sand or a rebuild, call (888) 255-9354 and we’ll tell you straight.
FAQs

A properly built Silestone paver driveway should last decades, with joint sand refreshed every few years and a seal coat on a reasonable schedule. The paver itself rarely fails first. The base and drainage are what decide the lifespan, which is why we don’t quote a system without checking what’s under it. Call (888) 255-9354 for a free estimate.
Often yes. If the failures are isolated (a few rocking pavers, washed joints, a small settled zone), re-sanding, sealing, and spot re-setting is the right call and lands in the $250 – $700 range for the seal alone. If more than a small share of the surface is moving, replacement is usually the cheaper path over five years. We’ll tell you which one you’re facing. Estimates are free at (888) 255-9354.
Most paver driveway installs run several days from demo to final sand, and repairs or re-sanding are typically done in a single visit. Weather, excavation, and drainage corrections move the timeline. Your written quote includes the schedule so there’s no guessing. Call (888) 255-9354 to lock in an estimate.
We source through manufacturer-authorized distribution and match the color, thickness, and finish to what’s already there, verified against the manufacturer’s spec for the specific line. We don’t carry stock, so we confirm lead time before we start. The material we set is backed in writing along with the labor under the 730-Day Done Right Promise.
Whether it’s your driveway in Yorba Linda or a paver patio off the back of the house, we also handle the rest of the envelope with the same set of brand partners, including KraftMaid, Cambria, and Kohler in the interior trades. Groundwork Construction Co. of Yorba Linda brings the same standard to a paver repair that we bring to a full scope project: background-checked, uniformed technicians, a live person answering 24/7, and pricing you see before we start. Call (888) 255-9354 for your free estimate.
Written by the team at Groundwork Construction Co. of Yorba Linda, serving Yorba Linda and nearby areas.












