







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Home Additions & ADU: The Yorba Linda Owner’s Guide
KraftMaid-compatible home additions and ADUs in Yorba Linda typically run $45,000 to $130,000 for an addition and $90,000 to $220,000 for a detached or attached ADU, depending on square footage, foundation work, and whether the cabinetry scope is a full KraftMaid kitchen or bath build-out. Garage conversions sit lower, at $30,000 to $80,000. Install timelines on planned additions are measured in months, not days.
Owners usually discover a failing KraftMaid component the same way: a drawer that won’t close flush, a cabinet door that sags at the hinge, or a finish that’s bubbling near a sink. In an addition or ADU, those small failures are often the first sign that the box cabinets were specified for a dry inland climate and then installed against a wet wall without a proper vapor barrier. We see it in Yorba Linda constantly, especially in converted garages and additions built onto older slabs.
Key Takeaways
- KraftMaid components in an addition or ADU are matched by series, door style, and box dimension, not by color alone.
- Installed cabinetry scope in a Yorba Linda addition typically lands inside the $45,000 to $130,000 project range.
- Most hinge, glide, and shelf-pin failures are a parts-and-labor fix, not a rebuild.
- We’re an independent service provider. We’re not affiliated with KraftMaid.
Which KraftMaid Models This Applies To

KraftMaid builds its cabinetry across a handful of door and construction lines, and the part you need depends on which one you have. The door style name is the fastest identifier; the series tells you the box construction and hinge spec. In most additions and ADUs we walk into around Yorba Linda, the label inside the cabinet door, on the back of the drawer box, or on the underside of the shelf is still legible. If it isn’t, the door profile, overlay type, and drawer glide brand get us to the right replacement.
Here’s the compatibility gotcha that trips up a lot of homeowners: KraftMaid has changed hinge and glide suppliers over the years, and a standard self-closing hinge will not seat correctly in a door bored for the earlier pattern. The screw hole spacing and cup depth differ. Ordering “a KraftMaid hinge” without confirming the bore pattern gets you a part that doesn’t fit, and a return you’ll wait weeks on. We measure the bore (35mm is common, but not universal), note the overlay, and match the glide to the drawer box depth before we order anything.
Then there’s the OEM-versus-aftermarket decision. For visible parts (door fronts, drawer faces, decorative panels), OEM is usually the right call so the finish and profile match the rest of the run. For hidden hardware (hinges, glides, shelf pins, toe-kick clips), a quality aftermarket equivalent from a known supplier is often the smarter buy and installs faster. We’ll tell you which side of that line your part falls on.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Home Additions & ADU Is Failing
- Doors that won’t stay closed or won’t sit flush. The hinge is worn, or the cup has pulled out of soft or swollen particleboard. In a Yorba Linda addition, this often traces to moisture wicking into the cabinet box from an unmasked wet wall.
- Drawers that drag or jump the track. The glide has failed or the drawer box has racked out of square. A racked box on a cheap glide will chew through replacement glides until the box itself is squared.
- Finish bubbling, peeling, or lifting near the sink or range. Heat and steam exposure, usually from a range hood that vents short of the cabinet run. Once the substrate swells, the door or panel has to be replaced, not refinished.
- Shelves that sag or won’t hold position. The shelf pin holes have wallowed out from repeated load. This is common in ADU kitchens where the pantry is doing double duty.
- Toe-kick and filler pieces separating from the floor or adjacent cabinet. Slab movement under the addition, or a filler that was never properly fastened. Left alone, it spreads to the cabinet run.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Yorba Linda depends on whether you’re replacing a single component or rebuilding a cabinet run inside an addition or ADU. A hinge or glide swap is a small line item. A door front or drawer face replacement with a matched finish runs higher. A full cabinet installation inside an addition or ADU sits in the $4,000 to $13,000 range, and a kitchen island installation runs $3,000 to $10,000, which matters once the addition includes a wet bar or second kitchen.
| Scope | Typical Yorba Linda Range |
|---|---|
| Single hinge, glide, or shelf-pin repair (parts + labor) | Small line item, quoted per part |
| Cabinet installation inside an addition or ADU | $4,000 – $13,000 |
| Kitchen island installation | $3,000 – $10,000 |
| Home addition (full project) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
What drives the range: box count, whether the existing boxes are salvageable, whether the finish has to be matched to an out-of-production door style, and how much of the addition has to be opened up to get to the cabinet run. Upfront pricing, no surprises. You get a written line-item quote before anything is ordered, and every job is covered by the 730-Day Done Right Promise. If it’s not done right, we make it right.
DIY or Call Us?
Some of this is safe to check yourself. Open the cabinet door, find the label, write down the door style and series, and measure the hinge bore with a caliper if you have one. Confirm the drawer glide brand stamped on the track. That’s the homework that saves you two weeks and a return.
Where DIY goes wrong: swapping hinges without matching the bore pattern, forcing a glide into a racked drawer box, and refinishing a swelled door instead of replacing it. Those three shortcuts turn a small parts job into a cabinet rebuild. And if your addition has a wet wall, an electrical panel, or a gas line near the cabinet run, that’s not a homeowner task. Stop, and call a trained professional.
Call (888) 255-9354 to schedule a free estimate. A live person answers, 24/7. Our technicians have up to 12 years of experience, they’re background-checked and uniformed, and they’ll tell you honestly whether you need a part or a new box.
FAQs

Twenty-five to thirty years is realistic for the boxes, less for the hardware. In Yorba Linda, the heat and dry inland air stress finishes faster than coastal markets do, so expect door glides and hinges to be the first things to go, usually between years 8 and 15. The boxes and door fronts often outlast them by a decade or more.
Usually yes. A failed hinge, glide, or shelf pin is a parts-and-labor fix that takes a fraction of what replacement costs. The exception is a swelled or delaminated box, or a door front with lifting finish; those need replacement, not repair. We’ll tell you which side of that line you’re on before you spend anything.
A single hinge or glide swap is a same-visit job. A door-front or drawer-face replacement with a matched finish typically takes one to two weeks to source and a half-day to install. A full cabinet run replacement inside an addition is measured in days, depending on the box count and the finish match.
We identify the door style, series, and bore pattern first, then match OEM for visible parts and a quality aftermarket equivalent for hidden hardware. We don’t carry stock on a truck, so we order to the spec we measure and confirm the fit before we book the install. That’s how you avoid a part that shows up and doesn’t seat.
Call (888) 255-9354 for an exact quote. Estimates are free, and the quote is written line-item so you can see parts and labor side by side. We also handle Cambria, Silestone, and Kohler alongside KraftMaid when the scope grows past the cabinet run.
Groundwork Construction Co. of Yorba Linda is an independent service provider and is not affiliated with KraftMaid. From foundation to finish line, we handle the addition or ADU and the cabinetry inside it, backed in writing by the 730-Day Done Right Promise. New customers get $1,000 off projects over $10,000, and 0% financing for 18 months is available on approved credit. Call (888) 255-9354 to schedule your free project estimate and design consult.
Written by the team at Groundwork Construction Co. of Yorba Linda, serving Yorba Linda and nearby areas.












