







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Yorba Linda Homeowners Choose Ameristar Construction
We provide independent Ameristar construction service in Yorba Linda: cabinet installation, refacing, and full kitchen work on Ameristar Ashford, Wakefield, Claremont, and Ridgefield lines. What makes our Ameristar work different is diagnosis first. We know where these cabinets fail after 10 to 15 years of daily use, and we fix the cause instead of selling a tear-out. We’re an independent Ameristar service provider, not affiliated with or authorized by the manufacturer, and that’s exactly why we can tell you honestly when refacing beats replacement. Call (888) 255-9354 to schedule a free estimate.
Why Trust Groundwork Construction Co. of Yorba Linda for Your Ameristar Construction?

Our technicians have up to 12 years of experience, and a good share of that has been spent inside Ameristar cabinet boxes: pulling drawers, checking frames for moisture swell, and learning which series hold up and which ones don’t. We know the Ashford and Wakefield door styles show screw fatigue in the same spots, and that Claremont and Ridgefield finishes behave differently in a kitchen that gets western sun through a Yorba Linda slider.
Parts matter as much as hands. We source OEM Ameristar hinges and glides when they’re available, because an exact-fit hinge keeps your door reveal even and your warranty uncomplicated. When an OEM part is discontinued or backordered, we move to quality aftermarket hardware from Blum or Grass, and we get your approval before we do it. Nothing gets swapped without your sign-off.
Every Ameristar job we take on in Yorba Linda is covered by our 730-Day Done Right Promise. If the work isn’t right, we make it right, and that’s in writing. Pricing is upfront and line-itemed, so the number you approve is the number you pay. Our technicians are background-checked and arrive in uniform, and when you call, a live person answers, 24/7.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Ameristar Construction Problems We Fix in Yorba Linda
Yorba Linda’s hot, dry summers followed by a handful of intense winter storms put cabinets through a real swing in humidity. That cycle is behind most of the Ameristar failures we see. Here’s what to look for:
- Hinge screws stripping out of particleboard frames. After years of daily opening and closing, the screws in Ameristar doors start to wallow out the particleboard and the door sags or won’t sit flush. This is the single most common Ameristar complaint we hear, and it’s fixable without new cabinets in most cases.
- Drawer glide tracks cracking or misaligning on lower cabinets. Lower drawers carry the most weight and take the most abuse. On older Wakefield and Ashford runs, the glide track can crack at the mounting point, and the drawer starts binding or dropping on one side.
- Refacing veneer peeling at edges near the sink. Splash zone moisture works under the veneer edge and lifts it. A dishwasher venting steam into the same cabinet run makes it worse. Left alone, the peel spreads along the stile.
- Painted and thermofoil finishes chipping or yellowing in sun-exposed areas. A kitchen with west or south-facing glass in Yorba Linda takes a lot of UV. Thermofoil can yellow and eventually flake at the edges, and painted doors chip at the corners where hands hit them most.
- Box separation and shelf sag on older Ameristar runs. Particleboard boxes that have absorbed moisture over a decade or more can separate at the joints, and shelves bow under the weight of cast iron and stoneware. When this is widespread, replacement makes more sense than repair, and we’ll tell you so.
A typical Ameristar job starts the same way. A homeowner notices that several cabinet doors no longer close flush and the hinges feel loose. On inspection, the hinge screws have stripped out of the particleboard frame, a common issue with these cabinets after 10 to 15 years of daily use. A qualified pro typically repairs by drilling out the stripped holes and inserting hardwood dowels or using larger hinge plates, then rehangs the doors; if multiple cabinets are affected, refacing or replacing the doors may be more economical. That’s the decision point, and it’s where an honest diagnosis saves you real money.
Ameristar Parts & Our Repair-vs-Replace Approach

Genuine Ameristar hinges and glides give the cleanest fit when they’re available. We go OEM first for that reason. When a part is discontinued or on backorder, quality aftermarket hardware from Blum or Grass does the job, and we’ll show you the part and the price before it goes on your cabinet. We don’t claim local stock on any of it; parts are sourced per job so you get the right fit, not whatever happens to be on a shelf.
The repair-or-replace call comes down to the boxes. If your Ameristar boxes are square and dry, refacing the doors and drawer fronts or upgrading the hardware usually runs well under full replacement, and you keep the layout you already like. If the boxes are swelling, separating, or soft to the touch, new cabinets are the honest answer. We’re not going to reface a failing box and hand you a two-year problem. Call (888) 255-9354 and we’ll look at your cabinets and give you a straight recommendation with a written price.
Our Ameristar Service Process – Step by Step
- 1
Diagnosis. We open every drawer and door, check each Ameristar frame for moisture swell and screw fatigue, test the glides under load, and look at veneer edges in the wet zones. You get a written line-item quote on the spot.
- 2
Repair or install. Stripped hinge holes get doweled and re-drilled, or we fit larger hinge plates. Glides get replaced with OEM or approved aftermarket hardware. On refacing jobs we prep the box, apply the new veneer and doors, and keep the finish away from the splash zone so it lasts.
- 3
Test. We hang and adjust every door for even reveals, run each drawer full-travel under weight, and check that soft-close hardware shuts flush against the frame. You walk through it with us before we call it done.
- 4
Warranty. The work is covered by our 730-Day Done Right Promise. If a hinge, glide, or veneer edge fails on our work, we come back and fix it.
See the difference
Before
After
Before
After
Before
AfterAmeristar Products We Service & Install in Yorba Linda
We service and install the Ameristar cabinet lines most Yorba Linda homes actually have: Ashford, Wakefield, Claremont, and Ridgefield. That covers door replacement, drawer front replacement, hinge and glide repair, full refacing, and new cabinet installation where the boxes are past saving. We also handle the kitchen work around the cabinets, from countertops and backsplash to island installs, so a cabinet project can grow into a full remodel without a second contractor. For hillside homes off Imperial Highway and Yorba Linda Boulevard, we factor in the slope and moisture movement that older tracts deal with before we set a single cabinet.
We Also Service These Brands
We work across brands, not just one. If your kitchen has KraftMaid cabinets, or you’re pairing Ameristar boxes with Cambria or Silestone counters and a Kohler sink, we can handle the whole job. That multi-brand capability means you’re not stuck with one product line or waiting on a single supplier for a part.
FAQs – Ameristar Construction Service in Yorba Linda

Is Groundwork Construction Co. of Yorba Linda authorized by Ameristar? No. We are an independent Ameristar service provider, not affiliated with or authorized by the manufacturer. We work on Ameristar cabinets because we’ve installed and serviced enough of their lines to know where they fail and how to fix them right.
Do you use genuine Ameristar/OEM parts? Yes, when they’re available. We source OEM Ameristar hinges and glides for an exact fit, and we use quality aftermarket hardware from Blum or Grass when OEM parts are discontinued or backordered, always with your approval before we install.
How long does Ameristar service take? A hinge and glide repair is usually a single visit. Refacing a standard kitchen typically takes a few days, and a full kitchen remodel runs longer depending on scope. We give you a written schedule before work starts.
What Ameristar models/series do you cover? We cover Ameristar Ashford, Wakefield, Claremont, and Ridgefield cabinet lines, from hardware repair and door replacement to full refacing and new installation.
Will service void my Ameristar warranty? Proper, warranty-safe service shouldn’t void your manufacturer warranty, and we take care to use the right parts and methods. Any remaining Ameristar manufacturer warranty stays with the manufacturer; our work is separately backed by our 730-Day Done Right Promise.
How much does Ameristar construction cost in Yorba Linda? Cabinet installation runs $4,000 – $13,000, a full kitchen remodel $14,000 – $45,000, and a small kitchen remodel $9,000 – $20,000. Exact pricing depends on your cabinet count, layout, and whether we’re refacing or replacing. Call (888) 255-9354 for a free estimate.
Ameristar Cabinet & Kitchen Pricing in Yorba Linda
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
We also offer 0% financing for 18 months and $1,000 off projects over $10,000, plus a free project estimate and design consult.
Book Your Ameristar Service in Yorba Linda, CA
Whether your Ameristar doors are sagging, your veneer is peeling near the sink, or you’re ready to reface the whole kitchen, we’ll look at it and tell you the truth. Call Groundwork Construction Co. of Yorba Linda at (888) 255-9354 for a free estimate. Live person, 24/7. Upfront pricing, no surprises.
Written by the team at Groundwork Construction Co. of Yorba Linda.












